如何把一个软盘镜像HBA文件转光盘ISO格式HBA文件
|
作者:sdccf 出处:unix-cd.com 更新时间: 2008年07月17日
|
标题 How can I create a CD iso HBA from a floppy HBA image? 如何把一个软盘镜像的HBA文件转成光盘ISO格式的HBA文件
关键词 unixware 7.1.4 openserver 6.0.0 714 600 hba host bus adapter floppy image iso boot time loadable isl CD CD-ROM UW7 UW714 OSR6 diskette install installation driver drivers
系统版本 Release SCO OpenServer Release 6.0.0 UnixWare 7.1.4
问题 Problem I have a system that does not have a floppy drive and I need to load a Host Bus Adapter (HBA) driver that I only have as a floppy image. Is there a way that I can copy the image to CD? 我有一台计算机没有软驱,但是我需要加载HBA驱动,我只有HBA驱动的软盘镜像文件, 有办法把这个镜像文件刻录到CD上马?
解决: Solution You can convert a HBA floppy image to an iso image as follows: 你可以按以下步骤把HBA的软盘镜像文件转换成光盘ISO镜像文件: 1) Log into an existing OpenServer 6.0.0 or UnixWare 7.1.4 system as root. 1)以root用户登录已经安装的OpenServer 6.0或UnixWare 7.1.4 。 2) Download/copy the floppy image into a temporary directory, e.g.
# cd /tmp/floppy.image
2)下载/拷贝软盘镜像文件到一个临时目录,例如: # cd /tmp/floppy.image
3) Mount the floppy image using:
# mount `marry -a /tmp/floppy.image` /mnt
3)用以下命令行挂接软盘镜像文件: # mount `marry -a /tmp/floppy.image` /mnt
4) Use mkisofs(8) to create an iso image of the HBA as follows:
# mkisofs -o hba.iso -r /mnt
4)用mkisofs命令创建HBA的ISO镜像文件,如下: # mkisofs -o hba.iso -r /mnt
5) Use cdrecord(1) to burn the iso image to CDROM. e.g.
# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 hba.iso
where c,b,t is taken from the output of the command:
# cdrecord --scanbus
The CD can then be used during the ISL of the Operating System.
5)用cdrecord命令把ISO镜像文件刻录到光盘,例如: # cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 hba.iso 这里c,b,t可以通过如下命令的输出得到: # cdrecord --scanbus 这样刻录的CD就可以在安装操作系统的过程中使用了。
|
|
|
|