在网上搜了几个安装说明，看起来很容易，俺也试试。
1、当然是先“开机”啦
2、“虚拟机”-》“安装VMware tools”，自动装载需要的镜像文件，自动打开镜像。有两个文件
3、复制第二个tar文件到.\tmp文件夹中，右键“解压到当前文件夹”，得到一个文件夹vmware-tools-distrib
4、到命令行终端（输入几个命令，一路回车就好了，最后有个设定分辨率的选项）：
comor@comor-desktop:/$ cd tmp
comor@comor-desktop:/tmp$ ls
keyring-ByAM6I pulse-lPJLDqfDSUdw virtual-comor.qpuppG
orbit-comor pulse-PKdhtXMmr18n VMwareTools-6.0.2-59824.tar.gz
orbit-gdm ssh-TLuWnu1022 vmware-tools-distrib
comor@comor-desktop:/tmp$ cd vmware-tools-distrib/
comor@comor-desktop:/tmp/vmware-tools-distrib$ ls
bin doc etc FILES INSTALL installer lib vmware-install.pl
comor@comor-desktop:/tmp/vmware-tools-distrib$ sudo ./vmware-install.pl
[sudo] password for comor:
Creating a new VMware Tools installer database using the tar4 format.
Installing VMware Tools.
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc]
What is the directory that contains the init scripts?
[/etc/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
The path "/usr/lib/vmware-tools" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
The installation of VMware Tools 6.0.2 build-59824 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: done
insserv: warning: script 'K20acpi-support' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'ufw' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'hwclock' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udev-finish' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'rsyslog' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth-splash' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'irqbalance' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'atd' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'failsafe-x' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'alsa-mixer-save' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'network-manager' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'acpid' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'dbus' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'procps' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `sendsigs' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'hostname' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0) of script `halt' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'cron' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `umountroot' overwrites defaults (empty).
insserv: warning: script 'acpi-support' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `umountfs' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'network-interface-security' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'console-setup' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `wpa-ifupdown' overwrites defaults (empty).
insserv: warning: current start runlevel(s) (0 6) of script `umountnfs.sh' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'apport' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'gdm' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth-log' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'hwclock-save' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udevmonitor' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'avahi-daemon' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'module-init-tools' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `networking' overwrites defaults (empty).
insserv: warning: current start runlevel(s) (6) of script `reboot' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'anacron' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'network-interface' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udev' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udevtrigger' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'dmesg' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth-stop' missing LSB tags and overrides
insserv: There is a loop between service rsyslog and pulseaudio if stopped
insserv: loop involving service pulseaudio at depth 3
insserv: loop involving service rsyslog at depth 2
insserv: loop involving service udev at depth 1
insserv: There is a loop between service rsyslog and pulseaudio if stopped
insserv: loop involving service bluetooth at depth 2
insserv: exiting now without changing boot order!
Trying to find a suitable vmmemctl module for your running kernel.
None of the pre-built vmmemctl modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmmemctl module
for your system (you need to have a C compiler installed on your system)?
[yes]
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.32-21-generic/build/include]
Extracting the sources of the vmmemctl module.
Building the vmmemctl module.
Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config0/vmmemctl-only'
make -C /lib/modules/2.6.32-21-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.32-21-generic'
CC [M] /tmp/vmware-config0/vmmemctl-only/os.o
In file included from /tmp/vmware-config0/vmmemctl-only/os.c:40:
/tmp/vmware-config0/vmmemctl-only/compat_wait.h:37:5: warning: "VMW_HAVE_EPOLL" is not defined
/tmp/vmware-config0/vmmemctl-only/compat_wait.h:43:5: warning: "VMW_HAVE_EPOLL" is not defined
In file included from /tmp/vmware-config0/vmmemctl-only/os.c:40:
/tmp/vmware-config0/vmmemctl-only/compat_wait.h:60: error: conflicting types for ‘poll_initwait’
include/linux/poll.h:70: note: previous declaration of ‘poll_initwait’ was here
/tmp/vmware-config0/vmmemctl-only/os.c: In function ‘os_init’:
/tmp/vmware-config0/vmmemctl-only/os.c:567: error: ‘struct proc_dir_entry’ has no member named ‘get_info’
make[2]: *** [/tmp/vmware-config0/vmmemctl-only/os.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config0/vmmemctl-only] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.32-21-generic'
make: *** [vmmemctl.ko] 错误 2
make:离开目录“/tmp/vmware-config0/vmmemctl-only”
Unable to build the vmmemctl module.
The memory manager driver (vmmemctl module) is used by VMware host software to
efficiently reclaim memory from a virtual machine.
If the driver is not available, VMware host software may instead need to swap
guest memory to disk, which may reduce performance.
The rest of the software provided by VMware Tools is designed to work
independently of this feature.
If you want the memory management feature, you can install the driver by
running vmware-config-tools.pl again after making sure that gcc, binutils, make
and the kernel sources for your running kernel are installed on your machine.
These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
Trying to find a suitable vmhgfs module for your running kernel.
None of the pre-built vmhgfs modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmhgfs module for
your system (you need to have a C compiler installed on your system)? [yes]
Extracting the sources of the vmhgfs module.
Building the vmhgfs module.
Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config1/vmhgfs-only'
make -C /lib/modules/2.6.32-21-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.32-21-generic'
CC [M] /tmp/vmware-config1/vmhgfs-only/backdoor.o
In file included from /tmp/vmware-config1/vmhgfs-only/backdoor.h:15,
from /tmp/vmware-config1/vmhgfs-only/backdoor.c:26:
/tmp/vmware-config1/vmhgfs-only/vm_basic_types.h:104:7: warning: "__FreeBSD__" is not defined
CC [M] /tmp/vmware-config1/vmhgfs-only/backdoorGcc32.o
In file included from /tmp/vmware-config1/vmhgfs-only/backdoor.h:15,
from /tmp/vmware-config1/vmhgfs-only/backdoorGcc32.c:32:
/tmp/vmware-config1/vmhgfs-only/vm_basic_types.h:104:7: warning: "__FreeBSD__" is not defined
CC [M] /tmp/vmware-config1/vmhgfs-only/bdhandler.o
/tmp/vmware-config1/vmhgfs-only/bdhandler.c:15:27: error: asm/semaphore.h: 没有那个文件或目录
In file included from /tmp/vmware-config1/vmhgfs-only/dbllnklst.h:14,
from /tmp/vmware-config1/vmhgfs-only/vmrpc.h:17,
from /tmp/vmware-config1/vmhgfs-only/hgfsBd.h:14,
from /tmp/vmware-config1/vmhgfs-only/bdhandler.c:29:
/tmp/vmware-config1/vmhgfs-only/vm_basic_types.h:104:7: warning: "__FreeBSD__" is not defined
In file included from /tmp/vmware-config1/vmhgfs-only/dbllnklst.h:14,
from /tmp/vmware-config1/vmhgfs-only/vmrpc.h:17,
from /tmp/vmware-config1/vmhgfs-only/hgfsBd.h:14,
from /tmp/vmware-config1/vmhgfs-only/bdhandler.c:29:
/tmp/vmware-config1/vmhgfs-only/vm_basic_types.h:170: error: conflicting types for ‘uintptr_t’
include/linux/types.h:41: note: previous declaration of ‘uintptr_t’ was here
In file included from /tmp/vmware-config1/vmhgfs-only/request.h:21,
from /tmp/vmware-config1/vmhgfs-only/bdhandler.c:34:
/tmp/vmware-config1/vmhgfs-only/compat_wait.h:37:5: warning: "VMW_HAVE_EPOLL" is not defined
/tmp/vmware-config1/vmhgfs-only/compat_wait.h:43:5: warning: "VMW_HAVE_EPOLL" is not defined
In file included from /tmp/vmware-config1/vmhgfs-only/request.h:21,
from /tmp/vmware-config1/vmhgfs-only/bdhandler.c:34:
/tmp/vmware-config1/vmhgfs-only/compat_wait.h:60: error: conflicting types for ‘poll_initwait’
include/linux/poll.h:70: note: previous declaration of ‘poll_initwait’ was here
make[2]: *** [/tmp/vmware-config1/vmhgfs-only/bdhandler.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config1/vmhgfs-only] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.32-21-generic'
make: *** [vmhgfs.ko] 错误 2
make:离开目录“/tmp/vmware-config1/vmhgfs-only”
Unable to build the vmhgfs module.
The filesystem driver (vmhgfs module) is used only for the shared folder
feature. The rest of the software provided by VMware Tools is designed to work
independently of this feature.
If you wish to have the shared folders feature, you can install the driver by
running vmware-config-tools.pl again after making sure that gcc, binutils, make
and the kernel sources for your running kernel are installed on your machine.
These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
pcnet32 28890 0
Unloading pcnet32 module
Trying to find a suitable vmxnet module for your running kernel.
None of the pre-built vmxnet modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmxnet module for
your system (you need to have a C compiler installed on your system)? [yes]
Extracting the sources of the vmxnet module.
Building the vmxnet module.
Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config2/vmxnet-only'
make -C /lib/modules/2.6.32-21-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.32-21-generic'
CC [M] /tmp/vmware-config2/vmxnet-only/vmxnet.o
In file included from /tmp/vmware-config2/vmxnet-only/vmxnet.c:37:
/tmp/vmware-config2/vmxnet-only/vm_basic_types.h:104:7: warning: "__FreeBSD__" is not defined
In file included from /tmp/vmware-config2/vmxnet-only/vmxnet.c:37:
/tmp/vmware-config2/vmxnet-only/vm_basic_types.h:170: error: conflicting types for ‘uintptr_t’
include/linux/types.h:41: note: previous declaration of ‘uintptr_t’ was here
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_probe_device’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:551: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:670: error: ‘struct net_device’ has no member named ‘open’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:671: error: ‘struct net_device’ has no member named ‘hard_start_xmit’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:672: error: ‘struct net_device’ has no member named ‘stop’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:673: error: ‘struct net_device’ has no member named ‘get_stats’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:674: error: ‘struct net_device’ has no member named ‘set_multicast_list’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:676: error: ‘struct net_device’ has no member named ‘tx_timeout’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:680: error: ‘struct net_device’ has no member named ‘poll_controller’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:684: error: ‘struct net_device’ has no member named ‘set_mac_address’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:685: error: ‘struct net_device’ has no member named ‘do_ioctl’
/tmp/vmware-config2/vmxnet-only/vmxnet.c:687: error: implicit declaration of function ‘SET_MODULE_OWNER’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_remove_device’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:737: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_init_ring’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:803: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_open’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:887: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘check_tx_queue’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1141: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_tx’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1204: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_rx’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1593: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_interrupt’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1692: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_close’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1774: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_load_multicast’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1851: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_set_multicast_list’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1912: error: ‘struct net_device’ has no member named ‘priv’
/tmp/vmware-config2/vmxnet-only/vmxnet.c: In function ‘vmxnet_get_stats’:
/tmp/vmware-config2/vmxnet-only/vmxnet.c:1992: error: ‘struct net_device’ has no member named ‘priv’
make[2]: *** [/tmp/vmware-config2/vmxnet-only/vmxnet.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config2/vmxnet-only] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.32-21-generic'
make: *** [vmxnet.ko] 错误 2
make:离开目录“/tmp/vmware-config2/vmxnet-only”
Unable to build the vmxnet module.
The fast network device driver (vmxnet module) is used only for our fast
networking interface. The rest of the software provided by VMware Tools is
designed to work independently of this feature.
If you wish to have the fast network driver enabled, you can install the driver
by running vmware-config-tools.pl again after making sure that gcc, binutils,
make and the kernel sources for your running kernel are installed on your
machine. These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
Trying to find a suitable vmblock module for your running kernel.
None of the pre-built vmblock modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmblock module
for your system (you need to have a C compiler installed on your system)?
[yes]
Extracting the sources of the vmblock module.
Building the vmblock module.
Using 2.6.x kernel build system.
make:进入目录'/tmp/vmware-config3/vmblock-only'
make -C /lib/modules/2.6.32-21-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: 正在进入目录 `/usr/src/linux-headers-2.6.32-21-generic'
CC [M] /tmp/vmware-config3/vmblock-only/linux/block.o
In file included from /tmp/vmware-config3/vmblock-only/linux/os.h:21,
from /tmp/vmware-config3/vmblock-only/linux/block.c:12:
/tmp/vmware-config3/vmblock-only/./include/compat_wait.h:37:5: warning: "VMW_HAVE_EPOLL" is not defined
/tmp/vmware-config3/vmblock-only/./include/compat_wait.h:43:5: warning: "VMW_HAVE_EPOLL" is not defined
In file included from /tmp/vmware-config3/vmblock-only/linux/os.h:21,
from /tmp/vmware-config3/vmblock-only/linux/block.c:12:
/tmp/vmware-config3/vmblock-only/./include/compat_wait.h:60: error: conflicting types for ‘poll_initwait’
include/linux/poll.h:70: note: previous declaration of ‘poll_initwait’ was here
In file included from /tmp/vmware-config3/vmblock-only/linux/vmblockInt.h:26,
from /tmp/vmware-config3/vmblock-only/linux/block.c:15:
/tmp/vmware-config3/vmblock-only/./include/vm_basic_types.h:104:7: warning: "__FreeBSD__" is not defined
In file included from /tmp/vmware-config3/vmblock-only/linux/vmblockInt.h:26,
from /tmp/vmware-config3/vmblock-only/linux/block.c:15:
/tmp/vmware-config3/vmblock-only/./include/vm_basic_types.h:170: error: conflicting types for ‘uintptr_t’
include/linux/types.h:41: note: previous declaration of ‘uintptr_t’ was here
make[2]: *** [/tmp/vmware-config3/vmblock-only/linux/block.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config3/vmblock-only] 错误 2
make[1]:正在离开目录 `/usr/src/linux-headers-2.6.32-21-generic'
make: *** [vmblock.ko] 错误 2
make:离开目录“/tmp/vmware-config3/vmblock-only”
Unable to build the vmblock module.
The vmblock module enables dragging or copying files from within a host and
dropping or pasting them onto your guest (host to guest drag and drop and file
copy/paste). The rest of the software provided by VMware Tools is designed to
work independently of this feature (including guest to host drag and drop and
file copy/paste).
If you would like the host to guest drag and drop and file copy/paste features,
you can install the driver by running vmware-config-tools.pl again after making
sure that gcc, binutils, make and the kernel sources for your running kernel
are installed on your machine. These packages are available on your
distribution's installation CD.
[ Press Enter key to continue ]
[EXPERIMENTAL] The Virtual Machine Communication Interface (VMCI) service
provides a new communication capability with the Host, primarily for
development at the moment. Would you like to enable this feature? [no]
Detected X.org version 0.0.0.
No drivers for X.org version: 0.0.0.
The configuration file /etc/X11/xorg.conf can not be found. Do you want to
create a new one? (yes/no) [yes]
Please choose one of the following display sizes that X will start with (1 -
15):
[1] "640x480"
[2] "800x600"
[3]< "1024x768"
[4] "1152x864"
[5] "1280x800"
[6] "1152x900"
[7] "1280x1024"
[8] "1376x1032"
[9] "1400x900"
[10] "1400x1050"
[11] "1440x900"
[12] "1680x1050"
[13] "1600x1200"
[14] "1920x1200"
[15] "2364x1773"
Please enter a number between 1 and 15:
[3] 2
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: done
DMA setup: done
Guest operating system daemon: done
The configuration of VMware Tools 6.0.2 build-59824 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an X server session.
To make use of the virtual printer, you will need to restart the CUPS service
Enjoy,
--the VMware team
comor@comor-desktop:/tmp/vmware-tools-distrib$
comor@comor-desktop:/tmp/vmware-tools-distrib$
我安装记录:
milton@milton-desktop:~$ cd /tmp
milton@milton-desktop:/tmp$ ls
keyring-U8Mrud pulse-mIJCPTwCVSUj VMwareTools-8.1.3-203739.tar.gz
orbit-gdm pulse-PKdhtXMmr18n vmware-tools-distrib
orbit-milton ssh-sOnqoM1326
orbit-root virtual-milton.841Uwx
milton@milton-desktop:/tmp$ cd v
virtual-milton.841Uwx/ vmware-tools-distrib/
milton@milton-desktop:/tmp$ cd vmware-tools-distrib/
milton@milton-desktop:/tmp/vmware-tools-distrib$ LS
The program 'LS' is currently not installed. You can install it by typing:
sudo apt-get install sl
milton@milton-desktop:/tmp/vmware-tools-distrib$
milton@milton-desktop:/tmp/vmware-tools-distrib$ ls
bin doc etc FILES INSTALL installer lib vmware-install.pl
milton@milton-desktop:/tmp/vmware-tools-distrib$ ./vmware-install.pl
Please re-run this program as the super user.
Execution aborted.
Found VMware Tools CDROM mounted at /media/VMware Tools. Ejecting device
/dev/sr0 ...
milton@milton-desktop:/tmp/vmware-tools-distrib$ sudo ./vmware-install.pl
[sudo] password for milton:
Creating a new VMware Tools installer database using the tar4 format.
Installing VMware Tools.
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc]
What is the directory that contains the init scripts?
[/etc/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
The path "/usr/lib/vmware-tools" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
The installation of VMware Tools 8.1.3 build-203739 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: done
Virtual Printing daemon: done
Unmounting HGFS shares: done
Guest filesystem driver: done
insserv: warning: script 'K20acpi-support' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udevmonitor' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'anacron' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'failsafe-x' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `wpa-ifupdown' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'hostname' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth-stop' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth-splash' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'irqbalance' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'network-interface' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'cron' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth-log' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'alsa-mixer-save' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udev' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'hwclock-save' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'console-setup' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'dmesg' missing LSB tags and overrides
insserv: warning: script 'acpi-support' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `umountroot' overwrites defaults (empty).
insserv: warning: current start runlevel(s) (0 6) of script `umountfs' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udev-finish' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (6) of script `reboot' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'dbus' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'rsyslog' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'hwclock' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'gdm' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `umountnfs.sh' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'acpid' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'module-init-tools' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `networking' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'atd' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'network-manager' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'procps' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'avahi-daemon' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `sendsigs' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udevtrigger' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0) of script `halt' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'ufw' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'apport' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'network-interface-security' missing LSB tags and overrides
insserv: There is a loop between service rsyslog and pulseaudio if stopped
insserv: loop involving service pulseaudio at depth 3
insserv: loop involving service rsyslog at depth 2
insserv: loop involving service udev at depth 1
insserv: There is a loop between service pulseaudio and rsyslog if stopped
insserv: exiting now without changing boot order!
WARNING: The installer initially used the insserv application to setup the
vmware-tools service. That application cannot be found. Please re-install the
insserv application. This script will now attempt to manually setup the
vmware-tools service.
Before you can compile modules, you need to have the following installed...
make
gcc
kernel headers of the running kernel
Searching for GCC...
Detected GCC binary at "/usr/bin/gcc".
The path "/usr/bin/gcc" appears to be a valid path to the gcc binary.
Would you like to change it? [no]
Searching for a valid kernel header path...
Detected the kernel headers of the running kernel at
"/lib/modules/2.6.32-21-generic/build/include".
The path "/lib/modules/2.6.32-21-generic/build/include" appears to be a valid
path to the kernel headers of the running kernel.
Would you like to change it? [no]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmmemctl-only'
make -C /lib/modules/2.6.32-21-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic'
CC [M] /tmp/vmware-root/modules/vmmemctl-only/backdoorGcc32.o
CC [M] /tmp/vmware-root/modules/vmmemctl-only/os.o
CC [M] /tmp/vmware-root/modules/vmmemctl-only/vmballoon.o
LD [M] /tmp/vmware-root/modules/vmmemctl-only/vmmemctl.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-root/modules/vmmemctl-only/vmmemctl.mod.o
LD [M] /tmp/vmware-root/modules/vmmemctl-only/vmmemctl.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmmemctl-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmmemctl-only'
cp -f vmmemctl.ko ./../vmmemctl.o
make: Leaving directory `/tmp/vmware-root/modules/vmmemctl-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmhgfs-only'
make -C /lib/modules/2.6.32-21-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic'
CC [M] /tmp/vmware-root/modules/vmhgfs-only/backdoor.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/backdoorGcc32.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/bdhandler.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpName.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/cpNameLite.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/dentry.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/dir.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/file.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/filesystem.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/fsutil.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/hgfsBd.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/hgfsEscape.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/inode.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/kernelStubsLinux.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/link.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/messageBackdoor.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/message.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/module.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/page.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/request.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/rpcout.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/stubs.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/super.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/tcp.o
CC [M] /tmp/vmware-root/modules/vmhgfs-only/transport.o
LD [M] /tmp/vmware-root/modules/vmhgfs-only/vmhgfs.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-root/modules/vmhgfs-only/vmhgfs.mod.o
LD [M] /tmp/vmware-root/modules/vmhgfs-only/vmhgfs.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmhgfs-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only'
cp -f vmhgfs.ko ./../vmhgfs.o
make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmxnet-only'
make -C /lib/modules/2.6.32-21-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic'
CC [M] /tmp/vmware-root/modules/vmxnet-only/vmxnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-root/modules/vmxnet-only/vmxnet.mod.o
LD [M] /tmp/vmware-root/modules/vmxnet-only/vmxnet.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmxnet-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmxnet-only'
cp -f vmxnet.ko ./../vmxnet.o
make: Leaving directory `/tmp/vmware-root/modules/vmxnet-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmblock-only'
make -C /lib/modules/2.6.32-21-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic'
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/block.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/control.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/dbllnklst.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/dentry.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/file.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/filesystem.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/inode.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/module.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/stubs.o
CC [M] /tmp/vmware-root/modules/vmblock-only/linux/super.o
LD [M] /tmp/vmware-root/modules/vmblock-only/vmblock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-root/modules/vmblock-only/vmblock.mod.o
LD [M] /tmp/vmware-root/modules/vmblock-only/vmblock.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmblock-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmblock-only'
cp -f vmblock.ko ./../vmblock.o
make: Leaving directory `/tmp/vmware-root/modules/vmblock-only'
[EXPERIMENTAL] The VMware FileSystem Sync Driver (vmsync) is a new feature that
creates backups of virtual machines. Please refer to the VMware Knowledge Base
for more details on this capability. Do you wish to enable this feature?
[no]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmci-only'
make -C /lib/modules/2.6.32-21-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic'
CC [M] /tmp/vmware-root/modules/vmci-only/kernelStubsLinux.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciDatagram.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmci_drv.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciEvent.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciGuestDs.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciGuestKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciProcess.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciQueuePair.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciUtil.o
LD [M] /tmp/vmware-root/modules/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-root/modules/vmci-only/vmci.mod.o
LD [M] /tmp/vmware-root/modules/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmci-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/vmware-root/modules/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vmci-only'
make -C /lib/modules/2.6.32-21-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic'
CC [M] /tmp/vmware-root/modules/vmci-only/kernelStubsLinux.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciDatagram.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmci_drv.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciEvent.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciGuestDs.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciGuestKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciKernelIf.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciProcess.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciQueuePair.o
CC [M] /tmp/vmware-root/modules/vmci-only/vmciUtil.o
LD [M] /tmp/vmware-root/modules/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-root/modules/vmci-only/vmci.mod.o
LD [M] /tmp/vmware-root/modules/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vmci-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/vmware-root/modules/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/vsock-only'
make -C /lib/modules/2.6.32-21-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic'
CC [M] /tmp/vmware-root/modules/vsock-only/linux/af_vsock.o
/tmp/vmware-root/modules/vsock-only/linux/af_vsock.c:359: warning: initialization from incompatible pointer type
CC [M] /tmp/vmware-root/modules/vsock-only/linux/notify.o
CC [M] /tmp/vmware-root/modules/vsock-only/linux/stats.o
CC [M] /tmp/vmware-root/modules/vsock-only/linux/util.o
CC [M] /tmp/vmware-root/modules/vsock-only/linux/vsockAddr.o
CC [M] /tmp/vmware-root/modules/vsock-only/driverLog.o
LD [M] /tmp/vmware-root/modules/vsock-only/vsock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-root/modules/vsock-only/vsock.mod.o
LD [M] /tmp/vmware-root/modules/vsock-only/vsock.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/vsock-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/vsock-only'
cp -f vsock.ko ./../vsock.o
make: Leaving directory `/tmp/vmware-root/modules/vsock-only'
The module vmxnet3 has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmxnet3 to override.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-root/modules/pvscsi-only'
make -C /lib/modules/2.6.32-21-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic'
CC [M] /tmp/vmware-root/modules/pvscsi-only/pvscsi.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-root/modules/pvscsi-only/pvscsi.mod.o
LD [M] /tmp/vmware-root/modules/pvscsi-only/pvscsi.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic'
make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/vmware-root/modules/pvscsi-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/vmware-root/modules/pvscsi-only'
cp -f pvscsi.ko ./../pvscsi.o
make: Leaving directory `/tmp/vmware-root/modules/pvscsi-only'
Detected X.org version 7.6.6.
No drivers for X.org version: 7.6.6.
Skipping X configuration because X drivers are not included.
Creating a new initrd boot image for the kernel.
update-initramfs: Generating /boot/initrd.img-2.6.32-21-generic
Checking acpi hot plug done
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: done
Paravirtual SCSI module: done
Guest filesystem driver: done
Mounting HGFS shares: done
Guest memory manager: done
Guest vmxnet fast network device: done
VM communication interface: done
VM communication interface socket family: done
Blocking file system: done
File system sync driver: done
Guest operating system daemon: done
Virtual Printing daemon: done
The configuration of VMware Tools 8.1.3 build-203739 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an X server session.
To enable advanced X features (e.g., guest resolution fit, drag and drop, and
file and text copy/paste), you will need to do one (or more) of the following:
1. Manually start /usr/bin/vmware-user
2. Log out and log back into your desktop session; and,
3. Restart your X session.
To use the vmxnet driver, restart networking using the following commands:
/etc/init.d/networking stop
rmmod pcnet32
rmmod vmxnet
modprobe vmxnet
/etc/init.d/networking start
Enjoy,
--the VMware team
