使用GridView来编辑和删除数据之所以很简单,是因为GridView和ObjectDataSource在底层非常一致。当更新按钮被点击时,GridView自动将字段的值赋给ObjectDataSource的UpdateParameters集合,然后激发ObjectDataSource的Update()方法。而DataList与Repeater并没有相关使用方法。
需要确保将合适的值赋给ObjectDataSource的参数,然后调用Update()方法。DataList提供了以下的属性和事件来完成这些: DataKeyField property — 更新或删除时,需要唯一确定DataList里的每个item。将这个属性设为显示的数据的主健。这样做会产生DataList的 DataKeys collection ,每个item都有一个指定的 DataKeyField .
EditCommand event — 当CommandName属性设为“Edit”的Button, LinkButton, 或 ImageButton 被点时激发. CancelCommand event — 当CommandName属性设为“Cancel”的Button, LinkButton, 或ImageButton 被点时激发. UpdateCommand event — 当CommandName属性设为“Update”的Button,LinkButton, 或ImageButton 被点时激发. DeleteCommand event — 当CommandName属性设为“Delete”的Button, LinkButton, 或 ImageButton 被点时激发. 使用以上的属性和事件,有四种方法来更新和删除数据:(第一种方法提供了更好的可扩展性,而设计DataList的本意就是使用这种方式。)
1. 使用ASP.NET 1.x 的技术— DataList先于ASP.NET 2.0 和ObjectDataSources 存在,可以直接通过编程来实现编辑和删除。这种方法需要在显示数据或者更新删除记录时,直接在BLL层将数据绑定到DataList。
2. 使用一个单独的ObjectDataSource 来实现选择,更新和删除 — DataList没有GridView内置的编辑删除功能,并不意味着不能添加这些功能。使用 ObjectDataSource,但是在设置ObjectDataSource的参数并调用Update()方法时,需要为DataList的UpdateCommand事件创建一个 event handler。
3. Using an ObjectDataSource Control for Selecting, but Updating and Deleting Directly Against the BLL — 使用第二种方法时需要为UpdateCommand事件和参数赋值等写一些代码。其实我们可以用ObjectDataSource来实现selecting ,更新和删除直接调用BLL(象第一种方法)。直接调用BLL会使代码可读性更好。
4. 使用多个ObjectDataSources —前面的三种方法都需要一些代码。最后一种方法是使用多个ObjectDataSources 。第一个ObjectDataSource 从BLL获取数据,并绑定到 DataList. 为更新添加另一个 ObjectDataSource, 直接添加到DataList的 EditItemTemplate.同样对删除也是如此。三个ObjectDataSource通过ControlParameters声明语法直接将参数绑定到ObjectDataSource 的参数 (而不是在 DataList的 UpdateCommand event handler编程处理). 这种方法也需要一些编码 — 需要调用ObjectDataSource内置的 Update() 或 Delete() — 但是比起其它三种方法,代码少的多。这种方法的劣势是多个ObjectDataSources 使页面看起来混乱。
注意: 1. 当使用ObjectDataSource修改数据时,在声明标记里需要移除OldValuesParameterFormatString (或重新设为缺省值,{0})。在并发控制下可使用original_{0},表示原始数据。
2. DataList有一些属性是编辑和删除需要用到的,这些值都存在view state里。因此创建支持编辑和删除功能的DataList时,DataList的view state需要开启。在创建可编辑的GridView,DetailsViews和FormViews的时候,view state是禁用的。这是因为ASP.NET 2.0 控件包含了control state,它在postback时状态是连续的。在GridView里禁用了view state仅仅只是忽略了无关紧要的状态信息,但是维持了control state(它包含了编辑和删除需要的状态)。而DataList是 ASP.NET 1.x时代创建的,并没有使用control state,因此view state必须开启。 3.默认DataList只有一个ItemTemplate。需要手动添加一个EditItemTemplate来支持编辑功能。 4.DataList并不支持双向绑定,准备更新数据时,需要编程将Textbox的Text的值传给ProductsBLL类的UpdateProduct方法。 当设置了CommandName的Repeater或DataList里的Button,LinkButton或ImageButton被点击时,Repeater或DataList的ItemCommand事件被激发。对DataList来说,如果CommandName设为某个值,另外一个事件也会被激发(除了ItemCommand被激发以外,下面事件也会激发),如下:
“Cancel” — 激发 CancelCommand event
“Edit” — 激发 EditCommand event “Update” — 激发UpdateCommand event 点击DataList里的button会引起postback,但是并没有进入product的编辑模式。为了完成这个,需要:
1. 设置DataList的 EditItemIndex property 为 被点击了Edit button的 DataListItem的 index . 2. 重新绑定数据到 DataList. 当 DataList 重新展现时, 和DataList的EditItemIndex相关的DataListItem 会展现EditItemTemplate. 通过以下代码完成: C# protected void DataList1_EditCommand(object source, DataListCommandEventArgs e) { // Set the DataList's EditItemIndex property to the index of the DataListItem that was clicked DataList1.EditItemIndex = e.Item.ItemIndex;// EditItemIndex表示获取或设置 DataList 控件中要编辑的选定项的索引号。 // Rebind the data to the DataList DataList1.DataBind(); } 第二个参数类型为DataListCommandEventArgs ,它是被点击的Edit button的DataListItem的引用(e.Item).首先设置DataList的EditItemIndex为需要编辑的DataListItem的ItemIndex,然后重新绑定数据。使DataList以只读模式展示item,需要: 1. 设置DataList的 EditItemIndex property 为一个不存在的DataListItem index -1是一个好的选择。(由于DataListItem index从0开始) 2. 重新绑定数据到DataList。由于没有DataListItem ItemIndex和DataList的EditItemIndex关联,整个DataList会展现为只读模式。 可以通过以下代码完成:
C# protected void DataList1_CancelCommand(object source, DataListCommandEventArgs e) { // Set the DataList's EditItemIndex property to -1 DataList1.EditItemIndex = -1; // Rebind the data to the DataList DataList1.DataBind(); } 完成UpdateCommand event handler,需要:
1.编程获取用户输入的product name和price,还有ProductID.
2.调用ProductsBLL类里的合适的UpdateProduct重载方法. 3.设置DataList的EditItemIndex property 为一个不存在的DataListItem index. -1 是一个好的选择。 4.重新帮订数据。 下面的代码完成了上面的功能:
C# protected void DataList1_UpdateCommand(object source, DataListCommandEventArgs e) { // Read in the ProductID from the DataKeys collection int productID = Convert.ToInt32(DataList1.DataKeys[e.Item.ItemIndex]); // Read in the product name and price values TextBox productName = (TextBox)e.Item.FindControl("ProductName"); TextBox unitPrice = (TextBox)e.Item.FindControl("UnitPrice");//查找对应的控件 string productNameValue = null; if (productName.Text.Trim().Length > 0) productNameValue = productName.Text.Trim(); decimal? unitPriceValue = null; if (unitPrice.Text.Trim().Length > 0) unitPriceValue = Decimal.Parse(unitPrice.Text.Trim(), System.Globalization.NumberStyles.Currency); // Call the ProductsBLL's UpdateProduct method... ProductsBLL productsAPI = new ProductsBLL(); productsAPI.UpdateProduct(productNameValue, unitPriceValue, productID);//调用BLL中的重载方法 // Revert the DataList back to its pre-editing state DataList1.EditItemIndex = -1; DataList1.DataBind(); } 为DataList的DeleteCommand事件创建一个event handler实现删除功能,见下面的代码:
C# protected void DataList1_DeleteCommand(object source, DataListCommandEventArgs e) { // Read in the ProductID from the DataKeys collection int productID = Convert.ToInt32(DataList1.DataKeys[e.Item.ItemIndex]); // Delete the data ProductsBLL productsAPI = new ProductsBLL(); productsAPI.DeleteProduct(productID);//调用BLL中的方法 // Rebind the data to the DataList DataList1.DataBind(); } 本文来自CSDN博客,转载请标明出处:http://blog.csdn.net/lanwilliam/archive/2008/06/08/2522553.aspx
|
|