BluetoothService里定义的Native方法都在android_server_BluetoothServer.cpp里建立jni调用 开启 由BluetoothEnabler控制,在构造里会先调用 LocalBluetoothManager.getInstance(context),在getInstance里会调用init()函 数,BluetoothAdapter.getDefaultAdapter()获得蓝牙设备的句柄,如果当前没有蓝牙设备则返回null。 初始化完毕会监听checkbox的状态,当点击checkbox会调用 LocalBluetoothManager.setBluetoothEnabled(enable)函数。调用mAdapter.enable()到 BluetoothService.enable()开启EnableThread线程,进行打开操作,同时调到 CachedBluetoothDeviceManager.onBluetoothStateChanged来读取上次关闭之前搜索到device. 涉及到的类: BluetoothService(最主要的类,开启具体命令的线程进行enadble,disable等操作) LocalBluetoothManager(初始化BluetoothAdapter) BluetoothEnabler(界面的点击和状态文字的显示) BluetoothAdapter(建立LocalBluetoothManager和BluetoothService的映射关系,主要是通过它调用BluetoothService的函数) 扫描 在BluetoothSetting里触发点击,调用LocalBluetoothManager.startScanning(true)函数,通过 BluetoothAdapter的startDiscovery调用到BluetoothService里的startDiscovery来调用 Native函数 startDiscoveryNative()。 startDiscovery()是个异步函数,会立即返回,通过注册 ACTION_DISCOVERY_STARTED、ACTION_DISCOVERY_FINISHED、ACTION_FOUND,来确定当前的状态。 当蓝牙由disable变成enable时会调用扫描,当距离上次扫描超过5分钟的前提下,退出页面,再进到页面的时候也会启动扫描。 在启动scan的时候,还会判断当前是否在播放音乐,如果在播放音乐,则不启动扫描。 点击查找设备后,会把设备列表里没有配对的设备清除掉,保留配对状态的设备。 扫描的过程是一个很耗费资源的过程,在扫描过程,不会去尝试进行新的连接,扫描时间默认是12秒,它是以一个系统服务的形式存在的,可以调用cancelDiscovery()来取消扫描。 连接 在setting界面点击连接,会调到CachedBluetoothDevice类的connect方法,调用 updateProfiles(),根据搜索到的device的uuid来向ProfilesList里添加profile,然后遍历 ProfileList,根据不同的profile来获得profileManager。 然后判断当前的device的Priority,如果Priority=100,则去调用queueCommand(new BluetoothJob(BluetoothCommand.CONNECT, this, profile)),去发送连接的命令。如果Priority=1,则不去自动连接。Priority=-1,代表当前的device没有配对。 在queueCommand()函数里,有一个消息队列来处理命令,在这里生成了一个BluetoothJob的实例,来代表要执行的命令。 最终调到processCommand(BluetoothJob job)函数,由它来通过job.command来调用CONNECT: DISCONNECT:REMOVE_BOND: 以A2DP为例,在connectInt里,根据不同的profile来获得profilemanger,然后调用 profilemanger.connect()函数,在这个函数里调用了BluetoothA2dpService的connectSink()函数, 最后调到Native方法connectSinkNative()去建立连接。 涉及到的一些类: CachedBluetoothDevice(搜索到的设备) BluetoothDevice(设备类) LocalBluetoothProfileManager(各种ProfileManger,实例化各种Profile的service) SettingsBtStatus(蓝牙的状态类) BluetoothA2dp(为LocalBluetoothProfileManager和BluetoothA2dpService建立映射关系) BluetoothA2dpService(最终的服务类,由它调用连接、断开等Native函数,和底层通信) |
|
来自: wanwanstudy > 《Bluettoth》