自动铺路机

] 自动铺设道路路面的马路打印机(23P)  

2012-02-22 06:19:29|  分类： 默认分类 |  标签： |字号大中小 订阅

本文引用自路人@行者《[组图] 自动铺设道路路面的马路打印机(23P)》

　　在《[创意] 自动敷设路面标线的马路打印机(18P)》一文里，路人介绍了能自举决定行走路线、自行避让周边车流、自动将各种标线打印到地面上的“马路打印机”（The Road Printer），其实还有一种更强悍的“马路打印机”，它连路面本身都可以直接“打印”出来，就有老外折腾了这么一台NB的机器，一台小铲车运砖，两个工人师傅在上面调整砖块，这路面就刷刷地从下面“打印”出来了！据说6米宽的路面，一天能铺400多米，而且这质量，光看那个铲砖的小车能直接在刚铺好的路面上跑就明白了。

　　家门口的马路似乎永远是处于半维修状态，间隔一两个月就能看到工人师傅热火朝天地挖路铺路。在感慨其神奇地创造了这么多工作机会的同时，我心理也暗暗地希望：把资源和精力折腾其它有创造性的东西不是更好吗？老外看来和我是一般想法，看看人家是怎么修马路的吧！他们这铺路现场比咱可冷清多了，就这么寥寥几个人，可是这才是真正的科技以人为本啊，把人力解放出来，从事更高级的劳动。当然，这机器显然不适合咱这种“要致富，修修路”的国情，铺路成本太透明了，而且铺出来的路也没有那么容易坏。

Tiger Stone, The Incredible Road Building Machine
　　This awesome piece of machinery feeds on cobblestones and lays them out in an interlocking pattern to build roads that would take hours to do manually. The Tiger Stone paving machine, which has been dubbed the “Road Printer”, can lay down 400 yards of road each day.
　　One to three human operators stand on the platform of the Tiger Stone, and move loose bricks by hand from its hopper to its sloping “pusher” slot – the bricks do have to be fed into the pusher in the desired finished pattern. From there, gravity causes them to slide together, in one road-wide sheet, down onto the sand.
　　The tread-tracked machine is electrically-powered, and has few moving parts, so noise and maintenance are kept to a minimum. It stays on course thanks to built-in sensors, which follow the curbs. The machine with two operators can pave at least 300 square meters of road per day, whereas a single conventional paver on their hands and knees manages between 75 and 100.
　　The Tiger Stone is available in four, five and six-meter (13, 16 and 20-foot) widths, and costs from US$81,485 to $108,655.

---

一个实际工程的案例：Project Udenhout，3000 m2 herbestraten

---

再看另外一个实际工程案例，看样子这种设备还生产了不少：

---