Thomson 585 wireless settings guide

ihacku 2013-01-30

展开全文

Summary: How to find and configure your router's wireless settings.

1. Connect and log in to your router

Open your web browser (This could be Internet Explorer, Safari or Firefox, depending on your system).
Ignore the web page (or error message) that appears and enter the IP address of your router. This should be 192.168.1.254 unless you've changed it.

If you're asked to log in, enter the Router Username and Password (I don't know what these are).
Click Home Network on the left menu.

You'll see a basic diagram showing the devices currently connected to your network.

Click WLAN: PlusnetWireless (where PlusnetWireless is the name of your wireless network).

Now you'll see an overview of the settings currently being used.
- To change the settings click Configure
- To see more information click Details

2. What settings are available and what do they do?

Check the table below to find out what each of the settings is for.

You might need to reconnect to your network after changing some of these settings (particularly the Network Name, Encryption or Encryption password). See our Wireless connection guide if you need help with this.

Change the settings you need to and click Apply

Setting	What does it do?
Interface Enabled (tick box)	Switch your wireless on or off.
Network Name (SSID)	The broadcast name of your wireless network, you'll see it when scanning for networks to connect to.
Interface Type	Control the wireless standard that your network broadcasts on 802.11b 802.11b(legacy)/g 802.11b/g 802.11g You shouldn't change this unless you're connecting with a computer or device that needs to use a particular standard.
Channel Selection	Choose the channel (frequency) that your wireless network transmits on. By default this will be set to Automatic. Automatic means the Thomson Gateway will choose the best channel each time you switch it on Manual allows you to choose a single channel to broadcast on (between 1-13) If you're having problems, using a single channel can improve the stability of your wireless connection. You'll need to experiment to find the channel that's best for you. We recommend trying channels 1, 6 or 12 first.
Allow multicast from Broadband Network	Lets you allow or block multicast broadcasts over your wireless network
Broadcast Network Name (tick box)	By default, your Thomson Gateway will display the Network Name (or SSID) to any computer that scans for available networks. To stop this from happening and hide the SSID, untick this box. Computers and other devices will still be able to connect to your network but you'll need to type the SSID in, rather than choosing from a list of available networks.
Allow New Devices	Control how new computers connect to your wireless network.
Encryption	Choose the method of encryption for your wireless network. Disabled Use WEP Encryption Use WPA-PSK Encryption Disabling encryption means anyone can access your network. WEP is an outdated method of encryption which is easily cracked. We do not recommend choosing either of these options. Leave this set to WPA-PSK unless you have a specific reason to change
WPA-PSK/WEP Encryption Key	This is the password you need to log on to your Wireless network.
WPA-PSK/WEP Version	Choose the level of encryption for your wireless network. WPA2 WPA+WPA2 WPA WPA2 is the newest and most secure version of WPA, but not all systems support it. WPA+WP2 is the standard option and will allow connections through either level of WPA. Only change to WPA2 if all your computers or devices support it.