启动SSH服务时提示 could not load host key: /etc/ssh/ssh_host_rsa_key 但是用/etc/init.d/sshd status看状态又是启动了的,远程telnet也可以通端口但就是SSH连接不上,查资料后处理完成,只需要在服务器上依次执行两条命令即可:
ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key
在启用 ssh 服务时,有时会看到如下提示:
root@bt:~# /etc/init.d/ssh start * Starting OpenBSD Secure Shell server sshd Could not load host key: /etc/ssh/ssh_host_rsa_key Could not load host key: /etc/ssh/ssh_host_dsa_key
有两个提示 Could not load host key: /etc/ssh/ssh_host_rsa_key 和 Could not load host key: /etc/ssh/ssh_host_dsa_key ,此时如果从客户端连接到服务器时是不会成功的。其原因是在 SSH 连接协议中需要有 RSA 或 DSA 密钥的鉴权。 因此,我们可以在服务器端使用 ssh-keygen 程序来生成一对公钥/私钥对
运行下面命令:
root@bt:/etc/ssh# ssh-keygen -t rsa -b 2048 -f /etc/ssh/ssh_host_rsa_key Generating public/private rsa key pair. Enter passphrase (empty for no passphrase): #直接回车即可 Enter same passphrase again: Your identification has been saved in /etc/ssh/ssh_host_rsa_key. Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub. The key fingerprint is: 3b:a4:b8:df:a9:15:d1:62:df:d5:d1:41:50:59:4a:96 root@bt The key's randomart image is: +--[ RSA 2048]----+ | .***| | . oE+o| | + . o .| | . + . . | | S . . | | . o o | | . . + | | . o o | | ..o.o | +-----------------+
上面 ssh-keygen 命令中,-t 选项表示生成的密钥所使用的加密类型,这里选择的是 RSA ;-b 选项表示 bit,后接一个整数,表示加密的位数,该数值越大表示加密的强度越高;-f 选项后接要生成的密钥文件名。根据 /etc/ssh 目录下的 sshd_config 配置文件,RSA 密钥默认识别文件名为 ssh_host_rsa_key 。
命令执行成功后,在 /etc/ssh 下会看到有两个文件生成:ssh_host_rsa_key 和 ssh_host_rsa_key.pub ,前者是私钥,后者是公钥。这样,当再次用 putty 连接时,首先会提示服务器端的加密指纹已经被修改,如果信任则点 yes 继续,否则断开,这里当然是选择信任 yes 。此后,客户端将用公钥对数据进行加密后发往服务器,而服务器收到数据后则用私钥进行解密。
|