[root@
test
~]
The number of cylinders
for
this disk is
set
to 35139.
There is nothing wrong with that, but this is larger than 1024,
and could
in
certain setups cause problems with:
1) software that runs at boot
time
(e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS
/2
FDISK)
Command (m
for
help): p <--显示分区情况
Disk
/dev/cciss/c0d1
: 146.8 GB, 146807930880 bytes
255 heads, 32 sectors
/track
, 35139 cylinders
Units = cylinders of 8160 * 512 = 4177920 bytes
Device Boot Start End Blocks Id System
/dev/cciss/c0d1p1
1 35139 143367104 8e Linux LVM
Command (m
for
help): d <--删除分区
Selected partition 1
Command (m
for
help): p <--在显示分区情况,发现已经没了
Disk
/dev/cciss/c0d1
: 146.8 GB, 146807930880 bytes
255 heads, 32 sectors
/track
, 35139 cylinders
Units = cylinders of 8160 * 512 = 4177920 bytes
Device Boot Start End Blocks Id System
Command (m
for
help): w <--保存退出
The partition table has been altered!
Calling ioctl() to re-
read
partition table.
Syncing disks.