|
= = = = = = = = = = = = = = = = = = = = = = =
【The process commonly used term 2 】
-- -- -- -- -- -- -- -- -- -- -- -- 1 [painting material]
Press the standard sample size, draw a line feed in raw materials.
-- -- -- -- -- -- -- -- -- -- -- --
2 [machine cutting raw material]
Cutting machine manufacturing luggage leather, natural leather, cloth, silk of various parts.
-- -- -- -- -- -- -- -- -- -- -- --
3 [machine cut the raw material]
Machine cutting cardboard, paper, leather, natural leather and other various parts.
-- -- -- -- -- -- -- -- -- -- -- --
4 [saw cutting machine]
Sawing machine Angle of plywood, wood, etc all kinds of parts.
-- -- -- -- -- -- -- -- -- -- -- -- 5 [blade edge]
Machine cut plywood, cardboard summer-planting help wall and the edge of the leather.
-- -- -- -- -- -- -- -- -- -- -- --
6 [carton mouth line drawing]
Draw the line size of the box.
-- -- -- -- -- -- -- -- -- -- -- --
7 [box mouth forming]
All kinds of box and corner arc.
-- -- -- -- -- -- -- -- -- -- -- --
8 [iron welding mouth]
Seams in iron mouth with butt welding.
-- -- -- -- -- -- -- -- -- -- -- --
9 [aluminum oxide mouth]
Aluminium magnesium alloy box mouth to oxidation, polishing, chemical processing.
-- -- -- -- -- -- -- -- -- -- -- --
10 [the lining points the rules]
By drawing the trajectory under all kinds of sewing machine line and rules from the point.
-- -- -- -- -- -- -- -- -- -- -- --
11 [the lining sewing]
All kinds of sewing box combination.
-- -- -- -- -- -- -- -- -- -- -- --
12 [high-frequency embossing]
Adopt high frequency heating process, crushing out all sorts of decorative pattern design on the leather.
-- -- -- -- -- -- -- -- -- -- -- --
13 [high frequency heat sealing]
Adopt high frequency heating mode, printed iron out of the way on the leather.
14 [spray paint] On the sheet surface spraying color and brightener.
-- -- -- -- -- -- -- -- -- -- -- --
15 brush [water]
Around the rubber sheet, cardboard sheet, variable Angle brush into a certain temperature, a certain concentration of soap and water.
-- -- -- -- -- -- -- -- -- -- -- --
16 [rub talc powder]
Wipe around the cardboard sheet talcum powder evenly.
-- -- -- -- -- -- -- -- -- -- -- --
17 [pressure shell]
Extrusion forming with press box shell.
-- -- -- -- -- -- -- -- -- -- -- --
18 [nest help]
Nest help article forming and adhesive wall interface.
-- -- -- -- -- -- -- -- -- -- -- --
19 [wood shell heat styling]
Using plywood hot-pressing machine, cover under the mouth, and the Angle of wood glue to finalize the design.
-- -- -- -- -- -- -- -- -- -- -- --
20 [wood shell cold sticky forming]
Plywood bottom, cover parts and help turn cold glue, nail and shell molding.
-- -- -- -- -- -- -- -- -- -- -- --
21 [plane tree fern round]
Wood shell edge plane triangle out has a certain radius of the arc edge.
-- -- -- -- -- -- -- -- -- -- -- --
22 [light] grinding
Put the box shell with sandpaper smooth.
-- -- -- -- -- -- -- -- -- -- -- --
23 [nails mouth]
Along the mouth screw at the bottom of a piece of above the sump to the top of wood, paper, etc. Small box buckle cover, the cover bottom flat.
-- -- -- -- -- -- -- -- -- -- -- --
24 [vacuum forming]
Plastic plate by heating, blowing and suction vacuum, cooling molding out of their shells.
-- -- -- -- -- -- -- -- -- -- -- --
25 [framed box surface stick]
In the box, box help framed leather sheet, such as glue.
-- -- -- -- -- -- -- -- -- -- -- --
26 [sewing plastic reinforcement]
In the bottom cover with the help of summer-planting plastic reinforcement on sewing.
-- -- -- -- -- -- -- -- -- -- -- --
27 [sewing side help]
In the Angle of bedding face of suitcase on both sides of the upper for sewing.
-- -- -- -- -- -- -- -- -- -- -- --
28 [nest shape]
Carton will soothe and nest the use manual operation to have total 3 d shape of the bottom and lid part.
-- -- -- -- -- -- -- -- -- -- -- --
29 [seam pillar]
Before and after will help with the side seam
-- -- -- -- -- -- -- -- -- -- -- --
30 [seam drill]
In the drill wear metal drill on sewing.
-- -- -- -- -- -- -- -- -- -- -- --
31 [install iron mouth]
Neatly packed in mouth edge at the bottom of the iron ports and with the help and leather bag.
-- -- -- -- -- -- -- -- -- -- -- --
32 [with wooden mouth]
Long with great circle cap nail to nail wooden mouth with the lid firmly together.
-- -- -- -- -- -- -- -- -- -- -- --
33 [install aluminum mouth]
Riveting, extrusion, mashed processing method, make the aluminum with tank shells together firmly.
-- -- -- -- -- -- -- -- -- -- -- --
34 [lock slot]
Installed on surface of the box to the lock position, rushed out of the lock at the bottom of the size of the slot with tools.
-- -- -- -- -- -- -- -- -- -- -- --
35 [rushed round bottom intake]
After the box help with tool out lying round bottom, side the size of the hole.
-- -- -- -- -- -- -- -- -- -- -- --
36 [riveting box lock]
As stipulated in the process of location, installation box nailing hole lock accessories, riveting locking.
-- -- -- -- -- -- -- -- -- -- -- --
37 [riveting g code]
Help, side dozen the nail hole, installation accessories riveting locking.
-- -- -- -- -- -- -- -- -- -- -- --
38 [rivet hinge]
Burrow, help rules after box installation hinge riveting locking.
-- -- -- -- -- -- -- -- -- -- -- --
39 [Loading pallets to ]
Riveting installed in front of the box for the center to hold (pallets to two single or double).
-- -- -- -- -- -- -- -- -- -- -- --
40 [packing]
Play the micropyle, fixed the bead box after the tighten the screw.
-- -- -- -- -- -- -- -- -- -- -- --
41] [plate]
With dedicated fixed screw on the front for aluminum plate.
-- -- -- -- -- -- -- -- -- -- -- --
42 [install strip combination lock]
Place to reveal the password in the center of the flat wheel, with screws installed firmly.
-- -- -- -- -- -- -- -- -- -- -- --
43 [rivet box bracket]
Inside the boxes on both sides to help riveting bearing box cover metal stents.
-- -- -- -- -- -- -- -- -- -- -- --
44 [rivet go round]
At the bottom of the bag directly play nail riveting the easy wheel.
-- -- -- -- -- -- -- -- -- -- -- --
45 iron [gold]
On the sheet, there will be design, text, logo of electrochemical aluminium film hot stamping process on the sheet.
-- -- -- -- -- -- -- -- -- -- -- --
46 [Ann bubble nail]
After the case, at the bottom of the bag, to help create, four central, when install bubble nail (bubble nails, which has two kinds of metal and plastic material).
-- -- -- -- -- -- -- -- -- -- -- --
47 [Act the role of install]
Install riveting in the bags of decorative accessories.
-- -- -- -- -- -- -- -- -- -- -- --
48 [install trademark]
Special markers at bags are installed on the said goods.
-- -- -- -- -- -- -- -- -- -- -- --
49 [sticky box]
Inside the suitcase, paste lining, rolling compaction.
-- -- -- -- -- -- -- -- -- -- -- --
50 [On page adhesive cloth]
, from the bottom of the box cover and help glue on the cover page, the rolling compaction.
-- -- -- -- -- -- -- -- -- -- -- --
51 [whole reason]
Comprehensive sorting, modification on bags.
-- -- -- -- -- -- -- -- -- -- -- --
52 [baked dry]
Suitcase was assembled, under the condition of high temperature for a period of time airing.
-- -- -- -- -- -- -- -- -- -- -- --
53 [wire forming]
Will do the opposite with wire, bend has a certain radius of the four rounded corners, butt welding square steel wire circle of growth.
-- -- -- -- -- -- -- -- -- -- -- --
54 [wire casing]
Will turn good wire opposite sides-to hold the two connectors, special iron casing set of good form opposite sides-to hold the circle.
-- -- -- -- -- -- -- -- -- -- -- --
55 [steel mouth the convex]
Flat steel belt, pressure steel convex strip with certain radius.
-- -- -- -- -- -- -- -- -- -- -- --
56 [steel plate mouth forming]
With good protruding of steel belt, two Angle, spreading Angle bending forming.
-- -- -- -- -- -- -- -- -- -- -- --
57 [seam opposite sides-to hold]
Wrapped in article opposite sides-to hold the opposite sides-to hold the core, sewing into opposite, sewing on the bedding face around the edge.
-- -- -- -- -- -- -- -- -- -- -- --
58 [loose threading a zipper]
Pull zipper sewing in the chain.
-- -- -- -- -- -- -- -- -- -- -- --
59 [made mention of]
The piece of material with the sew into the parts.
-- -- -- -- -- -- -- -- -- -- -- --
60 [riveting carry]
Will be inserted into his head bedding face palm gouges where whole pieces were missing, riveting of lash.
-- -- -- -- -- -- -- -- -- -- -- --
61 [album straps]
Sheet sewing the straps into straps.
-- -- -- -- -- -- -- -- -- -- -- --
62 [Button pocket on]
Small pocket button down on the package, the suture into an organic whole.
-- -- -- -- -- -- -- -- -- -- -- --
63 [made hook, ring mix]
Will wear good hook, ring a variety of small mix, soothe son summer-planting sewing on the wall.
-- -- -- -- -- -- -- -- -- -- -- --
64 [pick for wall]
To pull the chain with the bottom wall joint crack son together, forming wall child widgets.
-- -- -- -- -- -- -- -- -- -- -- --
65 [us live]
Bedding face and help, wall laced together to form product main part.
-- -- -- -- -- -- -- -- -- -- -- --
66 [Within theside]
In the bedding face and help along the edges, wall suture, sewing up to use all kinds of materials.
-- -- -- -- -- -- -- -- -- -- -- --
67 [live turned]
Flipped the soft box, bag bag surface.
-- -- -- -- -- -- -- -- -- -- -- --
68 [bottom]
Will hard bottom board (hard bottom there are other material) installed on the bottom of the package when use nail riveting.
-- -- -- -- -- -- -- -- -- -- -- --
69 [brace to help]
Sheet will help (help times material with metal, wood, etc.) supporting in soft body with rivet riveting.
-- -- -- -- -- -- -- -- -- -- -- --
70 [the riveting iron palm]
Create in the surface, insert the iron on the palm from the iron line hole, under the surface plate riveting flat.
-- -- -- -- -- -- -- -- -- -- -- --
71 [rivet mortise lock]
In the well bottom lock, the lock locks with riveting.
-- -- -- -- -- -- -- -- -- -- -- --
72 [on rebate]
The shelf, in a crowded glue processing methods, to firmly set in the ladies' bag opening mouth.
-- -- -- -- -- -- -- -- -- -- -- --
73 [roll edge]
On the edge of the piece of material or component part (s), with a neat sewing on leather the reverse side pressure line, then the leather over, cover the edges, stitching machine line again.
-- -- -- -- -- -- -- -- -- -- -- --
74 [and]
Overlap two fabrics, will be broken off one side higher than the edge of leather cover on the other side of the edge part, use sewing machine line.
-- -- -- -- -- -- -- -- -- -- -- --
75 [stick]
Overlap two fabrics, will be higher than that of one piece of coating adhesive on the edge of the leather, fold down to stick to the other side edge of the (stick side stick good, generally want to use elastic clamps hold a period of time).
-- -- -- -- -- -- -- -- -- -- -- --
76 [leakage silk printing]
On the sheet, using screen printing method and printing designs, text, the trademark of a process.
= = = = = = = = = = = = = = = = = = = = = = = = = =
【Article is excerpted from: Web Search】 【Reserved Integrate / Just Reference】 【Translation is by The Network】 |
|
|
来自： LOFT生活 > 《Clothes Term》
