= = = = = = = = = = = = = = = = = = = = = = = = = =
【 iyashi 】
English: a Handbag
Pinyin: shoubao
Basic explanation: the way is to use the hand to carry bag hand bag
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
【details】
Now the longest in the commercial character, give a person a kind of gentleman and very good faith professional feeling, hand bag is also convenient for businessmen to bring their own business CARDS, bank CARDS, mobile phone, driving certificate, keys, etc.
Now extended to the identity of a person image, through a package style, material, design. To judge a person's taste, and a person's status.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
"Term structure"
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
1. [plate larvae]
Usually at the bottom of the card wang needle narrowing up to 3-4 line one inch 8-9 needle, needle and thread requires the lines smooth, smooth, uniform seam allowance not skewed.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2. [pull's mouth]
Wants even, Angle can't knit, four corners even, package aggregate against bone, heart, can't appear phenomenon of broken bones.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
3. [bag before loading]
Must cover front pinhole in around the head or the bottom has a cast put on the corners of the bag to parallel, left and right sides is symmetrical.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
4. [on the chain]
Seam allowance should be unified? Uniform? Give special attention to the direction of zipper. Car out of the chain to flat, not up the waves.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
5. [barge wai]
To aim at, uh, a car? Zipper doesn't pop? Two-way street between to even and straight. Barge buried bag will directly affect the quality. Around for too long or too short will cause buried out bags of crooked or wrinkle, in principle, the barge to try before dark lines buried bag? The right to production.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
6. [car stickers]
Car line unified to hook edge? Burrs? Parallel up and down? Can't skewed.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
7. [double mouth edge]
Overlock seam allowance can't have a big fine edge? A discount? Blowout phenomenon? Around the corner it should coordinately.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
8. [Loading covering ]
For a car? To balance? Can't skew? Straight line want? Seam allowance.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
9. [With side pockets ]
Pay attention to the pull head direction? When buried pull zipper? Pull head in front direction? Pack out bags to founder in the four corners? Parallel up and down.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
10. [car harness]
Pay special attention to the quartet card and line? Usually four party card is 1.5 inches long? Points line through the intersection? Can't bend? Both square card ruffled rebate need to unified on average? Finally accept needle and thread to overlap.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
11. [A triangle belt car]
Under normal circumstances? Don't play the quartet card ribbon? In the triangle material within half an inch? Want to make the card ribbon? In the triangle is 1 inch? Especially with the guest request.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Actually every working procedure to do well is not difficult, the most main is the focal point that we want to know it.
For example a handbag open wire uniform requirement is seam allowance? Line is smooth? Do this after is parallel and symmetric parts?? The basis of these also make handbags.
Completes the handbags from each working procedure to start? Catch every working procedure of the pursuit of quality is our handbag producer.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
【 craft term 1 sewing 】
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
1.[sewing tag]
Sign is number of handbags, shall not be careless. Usually at the bottom of the card wang needle, narrowing to 3-4 needle and thread, line one inch 8-9 needles. Demand line smooth fluent, paper uniform, not skewed.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2. [la bone]
Paper wants even mouth, Angle can't knit, four corners even, package aggregate against bone, heart, can't appear phenomenon of broken bones.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
3. [before the truck bag]
Must cover front needle, a needle, in around the head or the bottom corners of pack out bags to parallel, left and right sides is symmetrical.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
4. [sewing zipper]
Paper should be unified, uniform, pay special attention on the direction of zipper. Chain stitch out stick to flat, not up the waves.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
5. [barge wai]
Barge scarf is the chain and the scarf, bottom links. Barge is surrounded to aim at triangulation sewing, zipper can't burst open, two-way street between even and straight. Barge buried bag will directly affect the quality. Around for too long or too short will cause buried out bags of crooked or wrinkle, in principle, the barge to try before dark lines buried bag, suitable to production.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
6. [Sewing stick]
Unified car line to hook side, burrs, parallel up and down, can't skewed.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
7. [and]
Tipping paper cannot have big mouth edge, discounts, blowout phenomenon, corner it to coordinately.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
8. [truck LIDS]
The needle car, to balance, can't skewed, line is straight, mouth is evenly.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
9. [sewing side pockets]
Buried note pull head direction, pull zipper, pull head in the front direction, pack out bags to founder in the four corners, parallel up and down.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
10. [sewing straps]
Pay special attention to the quartet card and line, usually square card length is 1.5 inch, points line passes through intersection, and cannot bend, square on both sides of the card folding seam allowance to the average unification, finally the needle and thread to overlap. Not dozen square card ribbon, into a triangle inside half an inch, want to make the ribbon, in the triangle is 1 inch, pay special attention to in accordance with the requirements of the guests.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
11. [Buried bag]
Buried bag is to put the back stitching, wai, face the whole, composed of finished products. Pay special attention to triangulation to alignment of each component, or product asymmetry, cause deformation.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Actually every working procedure to do well is not difficult, the most main is to know its focus.
For example a handbag open wire requirement is mouth is evenly, lines smooth, is parallel and symmetric parts after do this, the basis of these also make handbags.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
【The craft term 2 buckle good 】
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
A, classification
Buckle is generally divided into
Insert buckle series (also known as the side button), hook buckle series, rope buckle series, rubber feet, garment auxiliary material, hardware buckle series, pull rod series, tags, etc.
Which plug buckle, rope, hook clasp, rubber feet, shoulder pads, hardware is we used to.
-- -- -- -- -- -- -- -- -- -- -- --
1. [metal buckle with]
(1) according to the feature points:
Square shaped clasp/buckle/day day button shape/ring/oval ring/hook (rotation and not rotating)/buckle with belt buckle and other special purposes.
(2) according to the plating way points
With metal zipper pulls.
(3) determine the buckle with the specifications
Mainly by its width/height and line diameter, special fastener has the need to consult manufacturer directory, different vendors because of the mould of the different products will differ.
-- -- -- -- -- -- -- -- -- -- -- --
2. [The plastic buckle with]
(1) according to the function points
Day form/square/ladder clasp/buckle buckle buckle/latch/utility/rope buckle and plastic reinforcement.
(2) according to the material points
Commonly used for plastic and nylon material, nylon material price is higher.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2, the material, characteristics, USES, and others
-- -- -- -- -- -- -- -- -- -- -- -- --
1, [in]
The choice of material is commonly POM (polyformaldehyde, commonly known as just), PA with PC
Button inserted by the male and female, on both ends of the suture belt, respectively, according to different needs to choose the length of the ribbon, commonly used in the shoulder, waist, fixed. For more effective play to the role of the insert button, now has a more convenient and scientific buckle came out, such as replacement of stealth buckle. This is a kind of don't have to stitch the ribbon can easily replace the insert button. Another button for three direction, namely "Y" button, often used for baby carriages on security products, female can design according to customer's design and authorize the color label or LOGO, also can choose plating, silk screen, coloured drawing or pattern.
-- -- -- -- -- -- -- -- -- -- -- -- --
2, [hook]
Its material is POM, PA, PP commonly.
In general, hook buckle, D buckle, buckle, buckle, square buckle, buckle collectively known as the hook mouth, usually around the mouth and D buckle used at the same time, day word buckle adjust the ribbon length role, ladder buckle general use on the ribbon end, fixation, of hook, can screen printing, electroplating, often can design the LOGO on top of the ladder buckle.
-- -- -- -- -- -- -- -- -- -- -- -- --
3, [rope buckle]
Its material is PA, PP, PC, POM commonly.
Rope mouth diameter size, single and double hole, and the application of OO rope, nylon rope, elastic rope. And can design according to the requirement of the customer LOGO.
-- -- -- -- -- -- -- -- -- -- -- -- --
4, [feet]
It generally comes from PVC material.
Rubber feet are divided into granular and strips, use at the bottom of the bag or box, effectively protect the goods from wear and tear, is the indispensable material box, and has the function of anti-slip protection goods under special circumstances not damaged because of impact.
-- -- -- -- -- -- -- -- -- -- -- -- --
5, [shoulder pads]
Material is PVC, PU, TRP, TPE.
Shoulder pads have slow oppression, positioning of anti-skid function, the front of the shoulder pads is called back, the opposite is called the abdomen.
Hand is people most often use of contact, starting with ribbon with the inside, strong and not easy, so can be any color, LOGO and could be set up.
-- -- -- -- -- -- -- -- -- -- -- -- --
6, [5 gold ]
Generally for POM material.
Divided into metal hook buckle, buckle, square buckle, key chain, chain, zipper top.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
3, about the buckle of the test
Buckle in testing process there are two main aspects
-- -- -- -- -- -- -- -- -- -- -- -- --
[tension tests]
This test is mainly to detect buckle with the bear ability, it is divided into two steps to complete
Between 1, tensile test, and is mainly used for buckle, D buckle, buckle and so on
2, durable tensile test, its main principle, when determining the weight of the load must be buckle on the time value.
-- -- -- -- -- -- -- -- -- -- -- -- --
[temperature test]
This is primarily to test button under the abnormal temperature tolerance, can be divided into two kinds of high and low temperature
1, high temperature usually set at 70 degrees Celsius
2, usually set at 30 degrees below zero at low temperature
Time for 24 hours, can according to different requirements for the corresponding numerical tests are carried out, including the metal buckle with to rust and corrosion protection of it, such as drug resistance test.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
【Article is excerpted from: Web Search】
【Reserved Integrate / Just Reference】
【Translation is by The Network】
