= = = = = = = = = = = = = = = = = = = = = = =
【 iyashi 】
A ground adornment material, also called a floor tile. The clay burn becomes.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
【 classification terms 1 press craft 】
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
1. [glazed tile]
Bibulous rate is in 3% ~ 3% of glazed wall tiles.
Material: clay, quartz and feldspar burn becomes.
Production process, production process in general for the material, ingredients, crushing, heavy slurry, spray drying, compact forming, drying, glazing, sintering, inspection and packing and so on.
Formula: need number = the total area/length/width of ceramic tile ceramic tile
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2. [ceramic tile]
The ceramic tile of bibulous rate is under 0.5%.
Material: clay, quartz and feldspar burn becomes.
Production process, production process in general for the material, ingredients, crushing, heavy slurry, spray drying, compact forming, drying, sintering, inspection and packing and so on steps.
Formula: need quantity = total length/width of porcelain floor tile/ceramic tile
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
3. [parquet floor tile]
Put fire into ceramic tile after cutting assembled into all sorts of design adornment effect.
Material: clay, quartz and feldspar burn becomes.
Production process, production process in general for the material, ingredients, crushing, heavy slurry, spray drying, compact forming, drying, sintering, cutting, inspection and packing and so on steps.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
4. [body brick] (prevent slippery brick)
Many people have misconceptions about the concept of the brick, it should start with the production process of ceramic tile. In the production process of ceramic tile, there is a process called "cloth", also the ceramic powder evenly distributed on the press platens prepared, when finished fabric process, by the large tonnage of ceramic brick pressing machine to press the powder into embryo, finally after burn become tile kiln.
The so-called refers to connect body brick, in material process, distribution in the press for all the powder on the platens for the same kind of powder, firing of ceramic tile has from top to bottom is the same pattern, it's the same colour.
With relative is "secondary" fabric body brick tile, which is in material process, a base cloth first, then on the base in a layer of fabric cloth, through the ceramic press molding. The purpose is to reduce the cost of production of ceramic tile. For example in the production of white ceramic tile, because the white powder is expensive, so use common gray material as base, powder can save more than half of your price. This ceramic tile at side, can find powder material is two layers. The surface of the connect body brick not glaze, and positive and negative material and colour and lustre is consistent. Brick is a kind of wear-resisting brick, although there are variety such as soluble salt body brick, but relatively speaking, its design and color is not glazed pottery. As a result of current interior design more and more inclined to plain coloured design, so the brick is more and more become a kind of fashion, are widely used, etc. Decorate with the footpath outdoor at hall hall, corridor, the ground of the project; Can use lesser commonly at metope. Most of the prevent slippery brick all belong to the brick.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
5. [polishing brick]
Polishing brick is the brick adobe bodies on the surface of a light brick, polished and belongs to a kind of brick. Is relative to connect body brick and character, polishing brick surface more bright and clean. Polishing brick hard wear-resisting, suit in the most and interior space beyond closet, kitchen use. Based on using penetration technology, polishing brick is ok make result of wood of all sorts of copy stone, copy. Leave a bump when they are polished tile polishing porosity, the porosity can shelter evil people and practices, and even some tea poured on the polishing brick is too big. Perhaps the industry realize this, then some good quality when polishing brick factory add a layer of antifouling layer, all but the antifouling layer and polishing brick lost body brick effect. If you want to continue to connect body, will have to continue to brush coating. Decoration industry also has a typed before construction water wax to prevent sticking dirt.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
6. [bo changes a brick]
In order to solve the problem of polishing brick appear easy dirty, there was a bo changes a brick. Bo changes a brick is complete ceramic tile actually. Its surface is bright and clean but do not need polish again, so there is no polishing porosity issue. Polishing brick bo changes a brick is a kind of aggrandizement, it USES high temperature fire, quality of a material is harder than polishing brick more wear-resisting. There is no doubt that its price is also higher. Bo changes a brick basically is used in floor tile.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
7. [a of Mosaic] (ceramic Mosaic)
Volume is the smallest of all kinds of ceramic tile Mosaic, commonly known as brick. Mosaic give a person a kind of nostalgic feeling, is to decorate the material of wall ground in the 1990 s. Mosaic combination of change can be very many, for instance in a plane, can have a variety of methods: abstract designs, with color depth jump or transition, do pattern ornament for ceramic tile, and other decorative materials and so on. For surface or the corner room, glass Mosaic can play its small body of expertise, more complete package was built to surface smooth. Mosaic is generally divided into ceramic Mosaic, glass Mosaic, molten glass Mosaic, sintered glass Mosaic, glass Mosaic Venus, etc. Mosaic besides square and rectangle and alien species.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
8.[inferior smooth brick]
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
【the material classification terms 2 according to 】
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
1. [clay]
Must burn glair for bibulous rate is higher. This kind of brick intensity is low, now rarely used.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2. [stone]
In pursuit of adornment effect also burned the glaze, this kind of ceramic tile structure density, high strength, low water absorption, strong dirt resistance, ceramic tile is slightly higher than those clay fire.
Porcelain clay fire glazed tile, is currently widely used in home decoration, there are 80% of all buyers in the ceramic tile as a ground decorates material.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
3. [stone]
Usually USES natural stone material, is more natural and natural granite and marble.
Natural marble texture is dense but the hardness is not big, easy processing, carving and polishing, polishing, etc. Natural marble polishing smooth and exquisite, texture smooth, has a high ornamental.
Small marble water absorption, high durability, 40-100 can be used.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
4. [plastic]
Net-like distribution for leaks on the floor brick, brick distribution with support.
Using buckles type joining together. Can effectively waterproof, prevent slippery, and convenient splicing, solid and reliable.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
【The classification of term 3 according to the function 】
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
1. [The floor tile of ]
Just as its name implies is the brick laying on the ground, according to the design and color is divided into copy Spain brick, bo to change polishing brick, glazed pottery, prevent slippery brick and ooze to spend polishing brick, etc.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2. [wall]
According to the design and color can be divided into bo changes a brick, printed wall brick.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
3. [The lumbar line brick ]
Is printing brick more. In order to match the specifications of the wall brick, lumbar line brick is generally 60 mm; 200 mm wide.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
【Article is excerpted from: Web Search】
【Reserved Integrate / Just Reference】
【Translation is by The Network】
