|
| 物料科学 |
Material Science |
| 物料科学定义 |
Material Science Definition |
| 加工性能 |
Machinability |
| 强度 |
Strength |
| 抗腐蚀及耐用 |
Corrosion & resistance durability |
| 金属特性 |
Special metallic features |
| 抗敏感及环境保护 |
Allergic, re-cycling & environmental protection |
| 化学元素 |
Chemical element |
| 元素的原子序数 |
Atom of Elements |
| 原子及固体物质 |
Atom and solid material |
| 原子的组成、大小、体积和单位图表 |
The size, mass, charge of an atom, and is particles (Pronton,Nentron and Electron) |
| 原子的组织图 |
Atom Constitutes |
| 周期表 |
Periodic Table |
| 原子键结 |
Atom Bonding |
| 金属与合金 |
Metal and Alloy |
| 铁及非铁金属 |
Ferrous & Non Ferrous Metal |
| 金属的特性 |
Features of Metal |
| 晶体结构 |
Crystal Pattern |
| 晶体结构，定向格子及单位晶格 |
Crystal structure, Space lattice & Unit cell |
| X线结晶分析法 |
X – ray crystal analyics method |
| 金属结晶格子 |
Metal space lattice |
| 格子常数 |
Lattice constant |
| 米勒指数 |
Mill’s Index |
| 金相及相律 |
Metal Phase and Phase Rule |
| 固熔体 |
Solid solution |
| 置换型固熔体 |
Substitutional type solid solution |
| 插入型固熔体 |
Interstital solid solution |
| 金属间化物 |
Intermetallic compound |
| 金属变态 |
Transformation |
| 变态点 |
Transformation Point |
| 磁性变态 |
Magnetic Transformation |
| 同素变态 |
Allotropic Transformation |
| 合金平衡状态 |
Thermal Equilibrium |
| 相律 |
Phase Rule |
| 自由度 |
Degree of freedom |
| 临界温度 |
Critical temperture |
| 共晶 |
Eutectic |
| 包晶温度 |
Peritectic Temperature |
| 包晶反应 |
Peritectic Reaction |
| 包晶合金 |
Peritectic Alloy |
| 亚共晶体 |
Hypoeutetic Alloy |
| 过共晶体 |
Hyper-ectectic Alloy |
| 金属的相融、相融温度、晶体反应及合金在共晶合金、固熔孻共晶合金及偏晶反应的比较 |
Equilibrium Comparision |
| 金属塑性 |
Plastic Deformation |
| 滑动面 |
Slip Plan |
| 畸变 |
Distortion |
| 硬化 |
Work Hardening |
| 退火 |
Annealing |
| 回复柔软 |
Crystal Recovery |
| 再结晶 |
Recrystallization |
| 金属材料的性能及试验 |
Properties & testing of metal |
| 化学性能 |
Chemical Properties |
| 物理性能 |
Physical Properties |
| 颜色 |
Colour |
| 磁性 |
Magnetisum |
| 比电阻 |
Specific resistivity & specific resistance |
| 比重 |
Specific gravity & specific density |
| 比热 |
Specific Heat |
| 热膨胀系数 |
Coefficient of thermal expansion |
| 导热度 |
Heat conductivity |
| 机械性能 |
Mechanical properties |
| 屈服强度(降伏强度) |
(Yield strangth) |
| 弹性限度、阳氏弹性系数及屈服点 |
elastic limit, Yeung’s module of elasticity to yield point |
| 伸长度 |
Elongation |
| 断面缩率 |
Reduction of area |
| 金属材料的试验方法 |
The Method of Metal inspection |
| 不破坏检验 |
Non – destructive inspections |
| 渗透探伤法 |
Penetrate inspection |
| 磁粉探伤法 |
Magnetic particle inspection |
| 放射线探伤法 |
Radiographic inspection |
| 超声波探伤法 |
Ultrasonic inspection |
| 显微观察法 |
Microscopic inspection |
| 破坏的检验 |
Destructive Inspection |
| 冲击测试 |
Impact Test |
| 疲劳测试 |
Fatigue Test |
| 潜变测试 |
Creep Test |
| 潜变强度 |
Creeps Strength |
| 第壹潜变期 |
Primary Creep |
| 第二潜变期 |
Secondary Creep |
| 第三潜变期 |
Tertiary Creep |
| 主要金属元素之物理性质 |
Physical properties of major Metal Elements |
| 工业标准及规格 – 铁及非铁金属 |
Industrial Standard – Ferrous & Non – ferrous Metal |
| 磁力 |
Magnetic |
| 简介 |
General |
| 软磁 |
Soft Magnetic |
| 硬磁 |
Hard Magnetic |
| 磁场 |
Magnetic Field |
| 磁性感应 |
Magnetic Induction |
| 透磁度 |
Magnetic Permeability |
| 磁化率 |
Magnetic Susceptibility (Xm) |
| 磁力 |
(Magnetic Force) |
| 及磁场 |
(Magnetic Field) |
| 是因物料里的电子 |
(Electron) |
| 活动而产生抗磁体、顺磁体、铁磁体、反铁磁体及亚铁磁体 |
Diamagnetism, Paramagnetic Ferromagnetism, Antiferromagnetism & Ferrimagnetism |
| 抗磁体 |
Diamagnetism |
| 磁偶极子 |
Dipole |
| 负磁力效应 |
Negative effect |
| 顺磁体 |
Paramagnetic |
| 正磁化率 |
Positive magnetic susceptibility |
| 铁磁体 |
Ferromagnetism |
| 转变元素 |
Transition element |
| 交换能量 |
Positive energy exchange |
| 外价电子 |
Outer valence electrons |
| 化学结合 |
Chemical bond |
| 自发上磁 |
Spontaneous magnetization |
| 磁畴 |
Magnetic domain |
| 相反旋转 |
Opposite span |
| 比较抗磁体、顺磁体及铁磁体 |
Comparison of Diamagnetism, Paramagnetic & Ferromagnetism |
| 反铁磁体 |
Antiferromagnetism |
| 亚铁磁体 |
Ferrimagnetism |
| 磁矩 |
magnetic moment |
| 疲劳测试 |
Fatigue Test |
| 潜变测试 |
Creep Test |
| 潜变强度 |
Creeps Strength |
| 第壹潜变期 |
Primary Creep |
| 第二潜变期 |
Secondary Creep |
| 第三潜变期 |
Tertiary Creep |
| 主要金属元素之物理性质 |
Physical properties of major Metal Elements |
| 工业标准及规格 – 铁及非铁金属 |
Industrial Standard – Ferrous & Non – ferrous Metal |
| 磁力 |
Magnetic |
| 简介 |
General |
| 软磁 |
Soft Magnetic |
| 硬磁 |
Hard Magnetic |
| 磁场 |
Magnetic Field |
| 磁性感应 |
Magnetic Induction |
| 透磁度 |
Magnetic Permeability |
| 磁化率 |
Magnetic Susceptibility (Xm) |
| 磁力 |
(Magnetic Force) |
| 及磁场 |
(Magnetic Field) |
| 是因物料里的电子 |
(Electron) |
| 活动而产生抗磁体、顺磁体、铁磁体、反铁磁体及亚铁磁体 |
Diamagnetism, Paramagnetic Ferromagnetism, Antiferromagnetism & Ferrimagnetism |
| 抗磁体 |
Diamagnetism |
| 磁偶极子 |
Dipole |
| 负磁力效应 |
Negative effect |
| 顺磁体 |
Paramagnetic |
| 正磁化率 |
Positive magnetic susceptibility |
| 铁磁体 |
Ferromagnetism |
| 转变元素 |
Transition element |
| 交换能量 |
Positive energy exchange |
| 外价电子 |
Outer valence electrons |
| 化学结合 |
Chemical bond |
| 自发上磁 |
Spontaneous magnetization |
| 磁畴 |
Magnetic domain |
| 相反旋转 |
Opposite span |
| 比较抗磁体、顺磁体及铁磁体 |
Comparison of Diamagnetism, Paramagnetic & Ferromagnetism |
| 反铁磁体 |
Antiferromagnetism |
| 亚铁磁体 |
Ferrimagnetism |
| 磁矩 |
magnetic moment |
| 净磁矩 |
Net magnetic moment |
| 钢铁的主要成份 |
The major element of steel |
| 钢铁用"碳"之含量来分类 |
Classification of Steel according to Carbon contents |
| 铁相 |
Steel Phases |
| 钢铁的名称 |
Name of steel |
| 纯铁体 |
Ferrite |
| 渗碳体 |
Cementitle |
| 奥氏体 |
Austenite |
| 珠光体及共释钢 |
Pearlite &Eutectoid |
| 奥氏体碳钢 |
Austenite Carbon Steel |
| 单相金属 |
Single Phase Metal |
| 共释变态 |
Eutectoid Transformation |
| 珠光体 |
Pearlite |
| 亚铁释体 |
Hyppo-Eutectoid |
| 初释纯铁体 |
Pro-entectoid ferrite |
| 过共释钢 |
Hype-eutectoid |
| 珠光体 |
Pearlite |
| 粗珠光体 |
Coarse pearlite |
| 中珠光体 |
Medium pearlite |
| 幼珠光体 |
Fine pearlite |
| 磁性变态点 |
Magnetic Transformation |
| 钢铁的制造 |
Manufacturing of Steel |
| 连续铸造法 |
Continuous casting process |
| 电炉 |
Electric furnace |
| 均热炉 |
Soaking pit |
| 全静钢 |
Killed steel |
| 半静钢 |
Semi-killed steel |
| 沸腾钢(未净钢) |
Rimmed steel |
| 钢铁生产流程 |
Steel Production Flow Chart |
| 钢材的熔铸、锻造、挤压及延轧 |
The Casting, Fogging, Extrusion, Rolling & Steel |
| 熔铸 |
Casting |
| 锻造 |
Fogging |
| 挤压 |
Extrusion |
| 延轧 |
Rolling |
| 冲剪 |
Drawing & stamping |
| 特殊钢 |
Special Steel |
| 简介 |
General |
| 特殊钢以原素分类 |
Classification of Special Steel according to Element |
| 特殊钢以用途来分类 |
Classification of Special Steel according to End Usage |
| 易车(快削)不锈钢 |
Free Cutting Stainless Steel |
| 含铅易车钢 |
Leaded Free Cutting Steel |
| 含硫易车钢 |
Sulphuric Free Cutting Steel |
| 硬化性能 |
Hardenability |
| 钢的脆性 |
Brittleness of Steel |
| 低温脆性 |
Cold brittleness |
| 回火脆性 |
Temper brittleness |
| 日工标准下的特殊钢材 |
Specail Steel according to JIS Standard |
| 铬钢 – 日工标准JIS G4104 |
Chrome steel to JIS G4104 |
| 铬钼钢钢材 – 日工标准 G4105 62 |
Chrome Molybdenum steel to JIS G4105 |
| 镍铬 – 日工标准 G4102 63 |
Chrome Nickel steel to JIS G4102 |
| 镍铬钼钢 – 日工标准G4103 64 |
Nickel, Chrome & Molybdenum Steel to JIS G4103 |
| 高锰钢铸 – 日工标准 |
High manganese steel to JIS standard |
| 片及板材 |
Chapter Four-Strip, Steel & Plate |
| 冷辘低碳钢片(双单光片)(日工标准 JIS G3141) 73 - 95 |
Cold Rolled (Low carbon) Steel Strip (to JIS G 3141) |
| 简介 |
General |
| 美材试标准的冷辘低碳钢片 |
Cold Rolled Steel Strip American Standard – American Society for testing and materials (ASTM) |
| 日工标准JIS G3141冷辘低碳钢片(双单光片)的编号浅释 |
Decoding of cold rolled(Low carbon)steel strip JIS G3141 |
| 材料的加工性能 |
Drawing abillity |
| 硬度 |
Hardness |
| 表面处理 |
Surface finish |
| 冷辘钢捆片及张片制作流程图表 |
Production flow chart cold rolled steel coil sheet |
| 冷辘钢捆片及张片的电镀和印刷方法 |
Cold rolled steel coil & sheet electro-plating & painting method |
| 冷辘(低碳)钢片的分类用、途、工业标准、品质、加热状态及硬度表 |
End usages, industrial standard, quality, condition and hardness of cold rolled steel strip |
| 硬度及拉力 |
Hardness & Tensile strength test |
| 拉伸测试(顺纹测试) |
Elongation test |
| 杯突测试(厚度: 0.4公厘至1.6公厘，准确至0.1公厘 3个试片平均数) |
Erichsen test (Thickness: 0.4mm to 1.6mm, figure round up to 0.1mm) |
| 曲面(假曲率) |
Camber |
| 厚度及阔度公差 |
Tolerance on Thickness & Width |
| 平坦度(阔度大于500公厘，标准回火) |
Flatness (width>500mm, temper: standard) |
| 弯度 |
Camber |
| 冷辘钢片储存与处理提示 |
General advice on handling & storage of cold rolled steel coil & sheet |
| 防止生锈 |
Rust Protection |
| 生锈速度表 |
Speed of rusting |
| 焊接 |
Welding |
| 气焊 |
Gas Welding |
| 埋弧焊 |
Submerged-arc Welding |
| 电阻焊 |
Resistance Welding |
| 冷辘钢片(拉力: 30-32公斤/平方米)在没有表面处理状态下的焊接状况 |
Spot welding conditions for bared (free from paint, oxides etc) Cold rolled mild steel sheets(T/S:30-32 Kgf/ μ m2) |
| 时间效应(老化)及拉伸应变 |
Aging & Stretcher Strains |
| 日工标准(JIS G3141)冷辘钢片化学成份 |
Chemical composition – cold rolled steel sheet to JIS G3141 |
| 冷辘钢片的"理论重量"计算方程式 |
Cold Rolled Steel Sheet – Theoretical mass |
| 日工标准(JIS G3141)冷辘钢片重量列表 |
Mass of Cold-Rolled Steel Sheet to JIS G3141 |
| 冷辘钢片订货需知 |
Ordering of cold rolled steel strip/sheet |
| 其它日工标准冷轧钢片(用途及编号) |
JIS standard & application of other cold Rolled Special Steel |
| 电镀锌钢片或电解钢片 |
Electro-galvanized Steel Sheet/Electrolytic Zinc Coated Steel Sheet |
| 简介 |
General |
| 电解/电镀锌大大增强钢片的防锈能力 |
Galvanic Action improving Weather & Corrosion Resistance of the Base Steel Sheet |
| 上漆能力 |
Paint Adhesion |
| 电镀锌钢片的焊接 |
Welding of Electro-galvanized steel sheet |
| 点焊 |
Spot welding |
| 滚焊 |
Seam welding |
| 电镀锌(电解)钢片 |
Electro-galvanized Steel Sheet |
| 生产流程 |
Production Flow Chart |
| 常用的镀锌钢片(电解片)的基层金属、用途、日工标准、美材标准及一般厚度 |
Base metal, application, JIS & ASTM standard, and Normal thickness of galvanized steel sheet |
| 锌镀层质量 |
Zinc Coating Mass |
| 表面处理 |
Surface Treatment |
| 冷轧钢片 |
Cold-Rolled Steel Sheet/Strip |
| 热轧钢片 |
Hot-Rolled Sheet/Strip |
| 电解冷轧钢片厚度公差 |
Thickness Tolerance of Electrolytic Cold-rolled sheet |
| 热轧钢片厚度公差 |
Thickness Tolerance of Hot-rolled sheet |
| 冷轧或热轧钢片阔度公差 |
Width Tolerance of Cold or Hot-rolled sheet |
| 长度公差 |
Length Tolerance |
| 理论质量 |
Theoretical Mass |
| 锌镀层质量(两个相同锌镀层厚度) |
Mass Calculation of coating (For equal coating)/MM |
| 锌镀层质量(两个不同锌镀层厚度) |
Mass Calculation of coating (For differential coating)/MM |
| 镀锡薄铁片(白铁皮/马口铁) (日工标准 JIS G3303) 简介 |
General |
| 镀锡薄铁片的构造 |
Construction of Electrolytic Tinplate |
| 镀锡薄钢片(白铁皮/马日铁)制造过程 |
Production Process of Electrolytic Tinplate |
| 锡层质量 |
Mass of Tin Coating (JIS G3303-1987) |
| 两面均等锡层 |
Both Side Equally Coated Mass |
| 两面不均等锡层 |
Both Side Different Thickness Coated Mass |
| 级别、电镀方法、镀层质量及常用称号 |
Grade, Plating type, Designation of Coating Mass & Common Coating Mass |
| 镀层质量标记 |
Markings & Designations of Differential Coatings |
| 硬度 |
Hardness |
| 单相轧压镀锡薄铁片(白铁皮/马口铁) |
Single-Reduced Tinplate |
| 双相辗压镀锡薄钢片(马口铁/白铁皮) |
Dual-Reduction Tinplate |
| 钢的种类 |
Type of Steel |
| 表面处理 |
Surface Finish |
| 常用尺寸 |
Commonly Used Size |
| 电器用硅 [硅] 钢片 |
Electrical Steel Sheet |
| 简介 |
General |
| 软磁材料 |
Soft Magnetic Material |
| 滞后回线 |
Narrow Hystersis |
| 矫顽磁力 |
Coercive Force |
| 硬磁材料 |
Hard Magnetic Material |
| 最大能量积 |
Maximum Energy Product |
| 硅含量对电器用的低碳钢片的最大好处 |
The Advantage of Using Silicon low Carbon Steel |
| 晶粒取向 |
(Grain-Oriented) |
| 及非晶粒取向 |
(Non-Oriented) Grain Oriented & Non-Oriented |
| 电器用硅 [硅] 钢片的最终用途及规格 |
End Usage and Designations of Electrical Steel Strip |
| 电器用的硅 [硅] 钢片之分类 |
Classification of Silicon Steel Sheet for Electrical Use |
| 电器用钢片的绝缘涂层 |
Performance of Surface Insulation of Electrical Steel Sheets |
| 晶粒取向电器用硅钢片主要工业标准 |
International Standard – Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use |
| 晶粒取向电器用硅钢片 |
Grain-Oriented Electrical Steel |
| 晶粒取向，定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数(日工标准及美材标准) |
Magnetic Properties and Lamination Factor of SI-ORIENT-CORE& SI-ORIENT-CORE-HI B Electrical Steel Strip (JIS and AISI Standard) |
| 退火 |
Annealing |
| 电器用钢片用家需自行应力退火原因 |
Annealing of the Electrical Steel Sheet |
| 退火时注意事项 |
Annealing Precautionary |
| 碳污染 |
Prevent Carbon Contamination |
| 热力应先从工件边缘透入 |
Heat from the Laminated Stacks Edges |
| 提防过份氧化 |
No Excessive Oxidation |
| 应力退火温度 |
Stress –relieving Annealing Temperature |
| 晶粒取向电器用硅 [硅] 钢片 – 高硼(HI-B)定取向芯钢片及定取向芯钢片之机械性能及夹层系数 |
Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets |
| 晶粒取向电器用硅 [硅] 钢;片 – 高硼低硫(LS)定取向 钢片之磁力及电力性能 |
Magnetic and Electrical Properties of SI-ORIENT-CORE-HI-B-L S |
| 晶粒取向电器用硅 [硅] 钢片 – 高硼低硫(LS) 定取向钢片之机械性能及夹层系数 |
Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B-L S |
| 晶粒取向电器用硅(硅)钢片-高硼(HI-B)定取向 芯钢片，定取向芯钢片及高硼低硫(LS)定取向芯钢片之厚度及阔度公差 |
Physical Tolerance of SI-ORIENT-CORE-HI-B, SI-ORIENT-CORE, & SI-CORE-HI-B-LS Grain Oriented Electrical Steel Sheets |
| 绝缘表面 |
Surface Insulation |
| 非晶粒取向电力用钢片的电力、磁力、机械性能 及夹层系数 |
Lamination Factors of Electrical, Magnetic & Mechanical Non-Grain Oriented Electrical |
| 电器及家电外壳用镀层冷辘 [低碳] 钢片 |
Coated (Low Carbon) Steel Sheets for Casing,Electricals& Home Appliances |
| 镀铝硅钢片 |
Aluminized Silicon Alloy Steel Sheet |
| 简介 |
General |
| 镀铝硅合金钢片的特色 |
Feature of Aluminized Silicon Alloy Steel Sheet |
| 用途 |
End Usages |
| 抗化学品能力 |
Chemical Resistance |
| 镀铝(硅)钢片 – 日工标准(JIS G3314) |
Hot-aluminum-coated sheets and coils to JIS G 3314 |
| 镀铝(硅)钢片 – 美材试标准(ASTM A-463-77)35.7 JIS G3314镀热浸铝片的机械性能 |
Mechanical Properties of JIS G 3314 Hot-Dip Aluminum-coated Sheets and Coils |
| 公差 |
Size Tolerance |
| 镀铝(硅)钢片及其它种类钢片的抗腐蚀性能比较 |
Comparsion of various resistance of aluminized steel & other kinds of steel |
| 镀铝(硅)钢片生产流程 |
Aluminum Steel Sheet, Production Flow Chart |
| 焊接能力 |
Weldability |
| 镀铝钢片的焊接状态(比较冷辘钢片) |
Tips on welding of Aluminized sheet in comparasion with cold rolled steel strip |
| 钢板 |
Steel Plate |
| 钢板用途分类及各国钢板的工业标准包括日工标准及美材试标准 |
Type of steel Plate & Related JIS, ASTM and Other Major Industrial Standards |
| 钢板生产流程 |
Production Flow Chart |
| 钢板订货需知 |
Ordering of Steel Plate |
| 不锈钢 |
Stainless Steel |
| 不锈钢的定义 |
Definition of Stainless Steel |
| 不锈钢之分类，耐腐蚀性及耐热性 |
Classification, Corrosion Resistant & Heat Resistance of Stainless Steel |
| 铁铬系不锈钢片 |
Chrome Stainless Steel |
| 马氏体不锈钢 |
Martensite Stainless Steel |
| 低碳马氏体不锈钢 |
Low Carbon Martensite Stainless Steel |
| 含铁体不锈钢 |
Ferrite Stainless Steel |
| 镍铬系不锈钢 |
Nickel Chrome Stainless Steel |
| 释出硬化不锈钢 |
Precipitation Hardening Stainless Steel |
| 铁锰铝不锈钢 |
Fe / Mn / Al / Stainless Steel |
| 不锈钢的磁性 |
Magnetic Property & Stainless Steel |
| 不锈钢箔、卷片、片及板之厚度分类 |
Classification of Foil, Strip, Sheet & Plate by Thickness |
| 表面保护胶纸 |
Surface protection film |
| 不锈钢片材常用代号 |
Designation of SUS Steel Special Use Stainless |
| 表面处理 |
Surface finish |
| 薄卷片及薄片(0.3至2.9mm厚之片)机械性能 |
Mechanical Properties of Thin Stainless Steel(Thickness from 0.3mm to 2.9mm) – strip/sheet |
| 不锈钢片机械性能(301, 304, 631, CSP) |
Mechanical Properties of Spring use Stainless Steel |
| 不锈钢 – 种类，工业标准，化学成份，特点及 主要用途 |
Stainless Steel – Type, Industrial Standard, Chemical Composition, Characteristic & end usage of the most commonly used Stainless Steel |
| 不锈钢薄片用途例 |
End Usage of Thinner Gauge |
| 不锈钢片、板用途例 |
Examples of End Usages of Strip, Sheet & Plate |
| 不锈钢应力退火卷片常用规格名词图解 |
General Specification of Tension Annealed Stainless Steel Strips |
| 耐热不锈钢 |
Heat-Resistance Stainless Steel |
| 镍铬系耐热不锈钢特性、化学成份、及操作温度 |
Heat-Resistance Stainless Steel |
| 铬系耐热钢 |
Chrome Heat Resistance Steel |
| 镍铬耐热钢 |
Ni - Cr Heat Resistance Steel |
| 超耐热钢 |
Special Heat Resistance Steel |
| 抗热超级合金 |
Heat Resistance Super Alloy |
| 耐热不锈钢比重表 |
Specific Gravity of Heat – resistance steel plates and sheets stainless steel |
| 不锈钢材及耐热钢材标准对照表 |
Stainless and Heat-Resisting Steels |
| 发条片 |
Power Spring Strip |
| 发条的分类及材料 |
Power Spring Strip Classification and Materials |
| 上链发条 |
Wind-up Spring |
| 倒后擦发条 |
Pull Back Power Spring |
| 圆面("卜竹")发条 |
Convex Spring Strip |
| 拉尺发条 |
Measure Tape |
| 魔术手环 |
Magic Tape |
| 魔术手环尺寸图 |
Drawing of Magic Tap |
| 定型发条 |
Constant Torque Spring |
| 定型发条及上炼发条的驱动力 |
Spring Force of Constant Torque Spring and Wing-up Spring |
| 定型发条的形状及翻动过程 |
Shape and Spring Back of Constant Torque Spring |
| 定型发条驱动力公式及代号 |
The Formula and Symbol of Constant Torque Spring |
| 边缘处理 |
Edge Finish |
| 硬度 |
Hardness |
| 高碳钢化学成份及用途 |
High Carbon Tool Steel, Chemical Composition and Usage |
| 每公斤发条的长度简易公式 |
The Length of 1 Kg of Spring Steel Strip |
| 每公斤长的重量/公斤(阔100-200公厘) |
Weight per one meter long (kg) (Width 100-200mm) |
| 每公斤之长度(阔100-200公厘) |
Length per one kg (Width 100-200mm) |
| 每公尺长的重量/公斤(阔2.0-10公厘) |
Weight per one meter long (kg) (Width 2.0-10mm) |
| 每公斤之长度(阔2.0-10公厘) |
Length per one kg (Width 2.0-10mm) |
| 高碳钢片 |
High Carbon Steel Strip |
| 分类 |
Classification |
| 用组织结构分类 |
Classification According to Grain Structure |
| 用含碳量分类 – 即低碳钢、中碳钢及高碳钢 |
Classification According to Carbon Contains |
| 弹簧用碳钢片 |
CarbonSteel Strip For Spring Use |
| 冷轧状态 |
Cold Rolled Strip |
| 回火状态 |
Annealed Strip |
| 淬火及回火状态 |
Hardened & Tempered Strip/ Precision – Quenched Steel Strip |
| 贝氏体钢片 |
Bainite Steel Strip |
| 弹簧用碳钢片材之边缘处理 |
Edge Finished |
| 淬火剂 |
Quenching Media |
| 碳钢回火 |
Tempering |
| 回火有低温回火及高温回火 |
Low & High Temperature Tempering |
| 高温回火 |
High Temperature Tempering |
| 退火 |
Annealing |
| 完全退火 |
Full Annealing |
| 扩散退火 |
Diffusion Annealing |
| 低温退火 |
Low Temperature Annealing |
| 中途退火 |
Process Annealing |
| 球化退火 |
Spheroidizing Annealing |
| 光辉退火 |
Bright Annealing |
| 淬火 |
Quenching |
| 时间淬火 |
Time Quenching |
| 奥氏铁孻回火 |
Austempering |
| 马氏铁体淬火 |
Marquenching |
| 高碳钢片用途 |
End Usage of High Carbon Steel Strip |
| 冷轧高碳钢 – 日本工业标准 |
Cold-Rolled (Special Steel) Carbon Steel Strip to JIS G3311 |
| 电镀金属钢片 |
Plate Metal Strip |
| 简介 |
General |
| 电镀金属捆片的优点 |
Advantage of Using Plate Metal Strip |
| 金属捆片电镀层 |
Plated Layer of Plated Metal Strip |
| 镀镍 |
Nickel Plated |
| 镀铬 |
Chrome Plated |
| 镀黄铜 |
Brass Plated |
| 基层金属 |
Base Metal of Plated Metal Strip |
| 低碳钢或铁基层金属 |
Iron & Low Carbon as Base Metal |
| 不锈钢基层金属 |
Stainless Steel as Base Metal |
| 铜基层金属 |
Copper as Base Metal |
| 黄铜基层金属 |
Brass as Base Metal |
| 轴承合金 |
Bearing Alloy |
| 简介 |
General |
| 轴承合金 – 日工标准 JIS H 5401 |
Bearing Alloy to JIS H 5401 |
| 锡基、铅基及锌基轴承合金比较表 |
Comparison of Tin base, Lead base and Zinc base alloy for Bearing purpose |
| 易溶合金 |
Fusible Alloy |
| 焊接合金 |
Soldering and Brazing Alloy |
| 软焊 |
Soldering Alloy |
| 软焊合金 – 日本标准JIS H 4341 |
Soldering Alloy to JIS H 4341 |
| 硬焊 |
Brazing Alloy |
| 其它焊接材料请参阅日工标准目录 |
Other Soldering Material |
| 细线材、枝材、棒材 |
Chapter Five Wire, Rod & Bar |
| 线材/枝材材质分类及制成品 |
Classification and End Products of Wire/Rod |
| 铁线(低碳钢线)日工标准 JIS G 3532 |
Low Carbon Steel Wires ( Iron Wire ) to JIS G 3532 |
| 光线(低碳钢线)，火线(退火低碳钢线)，铅水线(镀锌低碳钢线)及制造钉用低碳钢线之代号、公差及备注 |
Ordinary Low Carbon Steel Wire, Annealed Low Carbon Steel Wire, Galvanized low Carbon Steel Wire & Low Carbon Steel Wire for nail manufacturing - classification, Symbol of Grade, Tolerance and Remarks. |
| 机械性能 |
Mechanical Properites |
| 锌包层之重量，铜硫酸盐试验之酸洗次数及测试用卷筒直径 |
Weight of Zinc-Coating, Number of Dippings in Cupric Sulphate Test and Diameters of Mandrel Used for Coiling Test |
| 冷冲及冷锻用碳钢线枝 |
Carbon Steel Wire Rods for Cold Heading & Cold Forging (to JIS G3507) |
| 级别，代号及化学成份 |
Classification, Symbol of Grade and Chemical Composition |
| 直径公差，偏圆度及脱碳层的平均深度 |
Diameter Tolerance, Ovality and Average Decarburized Layer Depth |
| 冷拉钢枝材 |
Cold Drawn Carbon Steel Shafting Bar |
| 枝材之美工标准，日工标准，用途及化学成份 |
AISI, JIS End Usage and Chemical Composition of Cold Drawn Carbon Steel Shafting Bar |
| 冷拉钢板重量表 |
Cold Drawn Steel Bar Weight Table |
| 高碳钢线枝 |
High Carbon Steel Wire Rod (to JIS G3506) |
| 冷拉高碳钢线 |
Hard Drawn High Carbon Steel Wire |
| 化学成份分析表 |
Chemical Analysis of Wire Rod |
| 线径、公差及机械性能(日本工业标准 G 3521) |
Mechanical Properties (JIS G 3521) (to JIS G3521, ISO-84580-1&2) |
| 琴线(日本标准 G3522) |
Piano Wires ( to G3522) |
| 级别，代号，扭曲特性及可用之线材直径 |
Classes, symbols, twisting characteristic and applied Wire Diameters |
| 直径，公差及拉力强度 |
Diameter, Tolerance and Tensile Strength |
| 裂纹之容许深度及脱碳层 |
Permissible depth of flaw and decarburized layer |
| 常用的弹簧不锈钢线-编号，特性，表面处理及化学成份 |
StainlessSpring Wire – National Standard number, Charateristic, Surface finish & Chemical composition |
| 弹簧不锈钢线，线径及拉力列表 |
Stainless Spring Steel, Wire diameter and Tensile strength of Spring Wire |
| 处理及表面状况 |
Finish & Surface |
| 各种不锈钢线在不同处理拉力比较表 |
Tensile Strength of various kinds of Stainless Steel Wire under Different Finish |
| 圆径及偏圆度之公差 |
Tolerance of Wire Diameters & Ovality |
| 铬镍不锈钢及抗热钢弹簧线材 –美国材验学会 ASTM A313 – 1987 |
Chromium – Nickel Stainless and Heat-resisting Steel Spring Wire – ASTM A313 – 1987 |
| 化学成份 |
Chemical Composition |
| 机械性能 |
Mechanical Properties |
| 305, 316, 321及347之拉力表 |
Tensile Strength Requirements for Types 305, 316, 321 and 347 |
| A1S1-302 贰级线材之拉力表 |
Tensile Strength of A1S1-302 Wire |
| 日本工业标准 – 不锈钢的化学成份(先数字后字母排列) |
JIS – Chemical Composition of Stainless Steel (in order of number & alphabet) |
| 美国工业标准 – 不锈钢及防热钢材的化学成份(先数字后字母排列) |
AISI – Chemical Composition of Stainless Steel & Heat-Resistant Steel(in order of number & alphabet) |
| 易车碳钢 |
Free Cutting Carbon Steels (to JIS G4804 ) |
| 化学成份 |
Chemical composition |
| 圆钢枝，方钢枝及六角钢枝之形状及尺寸之公差 |
Tolerance on Shape and Dimensions for Round Steel Bar, Square Steel Bar, Hexagonal Steel Bar |
| 易车(快削)不锈钢 |
Free Cutting Stainless Steel |
| 易车(快削)不锈钢种类 |
Type of steel |
| 易车(快削)不锈钢拉力表 |
Tensile Strength of Free Cutting Wires |
| 枝/棒无芯磨公差表(μ) (μ = 1/100 mm) |
Rod/Bar Centreless Grind Tolerance |
| 易车不锈钢及易车钢之不同尺寸及硬度比较 |
Hardness of Different Types & Size of Free Cutting Steel |
| 扁线、半圆线及异形线 |
Flat Wire, Half Round Wire, Shaped Wire and Precision Shaped Fine Wire |
| 加工方法 |
Manufacturing Method |
| 应用材料 |
Material Used |
| 特点 |
Characteristic |
| 用途 |
End Usages |
| 不锈钢扁线及半圆线常用材料 |
Commonly used materials for Stainless Flat Wire & Half Round Wire |
| 扁线公差 |
Flat Wire Tolerance |
| 方线公差 |
Square Wire Tolerance |
|
