01垂直轴风力发电机介绍 (01)Vertical Axis Wind Turbine.mp4 wind2volts 在 2009-07-13上传 类别:科学和技术 This wind turbine is based on the Lenz II design which measures 4 ft tall X 3 ft in diameter. 这种风力发电机组的基础上的楞次定律II设计直径测量身高4英尺×3英尺。 It has a 12 magnet, dual rotor alternater with 9 coils. Each coil is 70 turns. 它有12个磁铁,双9线圈转子alternater。每个线圈为70匝。 The wing construction is a steel frame made of laser cut ribs with tubular spars and a trailing edge. The ribs fit into notches on the spars and was welded together. The skin is .030" aluminum that has been fastened with rivets. 机翼的建设是一个钢架制成的管状梁和下降沿的激光切割排骨。排骨放入桅杆上的缺口和被焊接在一起。皮肤是.030“铝已用铆钉固定。 The rotating assembly spins on a fixed shaft. Bearings and wing spokes are bolted to the center tri-star carrier plates. The wings can be quickly removed and swapped. 旋转的组装在一个固定的轴旋转。轴承和右翼辐条螺栓中心的三星级载板。翅膀可以快速删除和交换。 Currently this turbine feeds a small bank of 2 GC-110 wet cell batteries wired in series for a 12V system. AC output is provided by a 1500W inverter.
目前这种涡轮机喂2 GC-110湿细胞有线系列电池为12V系统的小银行。提供一个1500W逆变器的交流输出。 . |
|