|
==========================
【Concept】 Automotive film is attached to the auto glass is used to control the sun, to ensure the safety of a film. ========================== 【History and Terminology】 Three stages of development of car film - "tea paper", "proof membrane", "Solar Film", "metal magnetron sputtering film", "ceramic membrane", "federal film." -------------------- 1 [tea paper] Is a first-generation product, commonly known as the Sun paper, the characteristics of shading and strong, easy to install, the disadvantage is not insulated, easy to fade, easy unglued; -------------------- 2 [proof membrane] Is a second generation product, the use of new and thicker adhesive layers to improve the explosion effects, with some heat, sun performance, heat rate between 20-60%, about 80% across the UV; -------------------- 3 [Solar Film] Is a third-generation product, also known as thermal paper, space film, there are a lot of new technologies, such as "magnetic coating", "micron technology", "nanotechnology", "spectrum microparticle technology", which effectively block ultraviolet more than 90%, the infrared blocking rate increased to about 30% to 95%, and more viscous gel, which can be achieved only reduces the thickness of the film and also enhance the effect of explosion-proof performance. -------------------- 4 [metal magnetron sputtering film] Magnetron sputtering process through a variety of technological innovations, can be nickel, silver, titanium, gold and other advanced aerospace alloys using the most advanced multi-cavity high-speed rotating equipment, the use of electric and magnetic force to the principle of high speed metal particles are uniformly Sputtering on PET substrate high tension (can be realized simultaneously sputtered in a multilayered metal film), relying on reflection, high efficiency barrier infrared heat. However, due to higher metal layers thick, will to some extent affect the communication signal, and high-reflective, if used improper maintenance is prone to oxidation phenomena affect insulation performance and aesthetics. -------------------- 5 [ceramic membrane] Is different from the traditional film made of metal or dyeing insulation film types, called "IR film" or "endothermic" films in the international arena, by containing ITO \ ATO (metal oxide powder) coating layer infrared, ultraviolet absorption strong, relative to the metal oxide film it solves the problem, the metal layer shielding problems, but it absorbs the heat reaches a certain saturation lose the insulating effect, but also require a higher construction, not the slightest Shen will film showing bad body bake ceramic cracks or bubbles. -------------------- 6 [Federal Film] ========================== 【Classification terminology】 -------------------- 1 [dyed film] Is the most low-end automotive film, this film features a thin, non-insulated, easy to fade. More generally in the store, very cheap, paste the entire vehicle as long as twelve hundred dollars. "Teeth waist fade" is its most notable features. --------------------
2 [coated printing film] Generally thicker. This film insulation is good, but somewhat less perspective. --------------------
3 [ordinary metal film] Is the original spray the colorless metal film made of metal is generally aluminum, and iron. But this film is a perspective view of the general insulation in general, and the price is not low. -------------------- 4 [nano-ceramic films] High-end film, is that nanotechnology will "Silicon" particle made of a colorless spray to the original film, this film insulation is good, clear, is a new technology product, with no interference with electronic signals, environmental protection, etc. . -------------------- 5 [precious metal film] Name implies justice, this film is also a splash on the colorless metal original film, but the difference is splattered all precious metals, chromium, titanium and platinum. Furthermore, this film is sputtering method "Magnetron Sputtering." This is a complex process. This membrane is characterized by pure color. -------------------- 6 [double precious metal film] This film is by magnetron sputtering (SPUTTER) process, the precious metals such as platinum, titanium colorless spray to both sides of the original film. So that the film has a metal layer. Thus low-reflective, maintaining a constant temperature inside the car, reducing fuel consumption. Color and crystal clear, with a one-way transmittance characteristics, from inside and outside the visual, crystal clear, from the inside as the outside, looming. It also effectively block 99% of UV rays, protecting your skin. ========================== 【Reserved Integrate / Just Reference】 【Translation is by The Network】 |
|
|
来自： LOFT生活 > 《Home Term》
