转载请注明出处:http://blog.csdn.net/qq11231325 UITableView : UIScrollView <NSCoding> 1. 创建一个 UITableView 对象 ITableView *tableView = [[UITableView alloc]initWithFrame:[[UIScreen mainScreen] bounds] style:UITableViewStylePlain]; 2.separatorColor 分割线颜色 e.g. ableView.separatorColor = [UIColor redColor]; 3.rowHeight 调整每个 cell 点高度(默认 44 ) e.g. tableView.rowHeight = 60; 4.reloadData 刷新数据 e.g. [tableView reloadData]; 5.<UITableViewDelegate,UITableViewDataSource> 两个必须实现的方法 -(NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section 控制一个 section 中 cell 的多少 - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *) indexPath 控制 cell 中的内容 6. 选中 cell 时候使用的方法 - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath 7. 取消选中时候用的方法 (不常用) - (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath 8. 控制分区个数 - (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView 9.section 上 Header 显示的内容 - (NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section 10.section 上 Footer 显示的内容 - (NSString *)tableView:(UITableView *)tableView titleForFooterInSection:(NSInteger)section 11.section 顶部的高度 - (CGFloat)tableView:(UITableView *)tableView heightForHeaderInSection:(NSInteger)section 12.cell 的高度 - (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath 13 该方法返回值用于在表格右边建立一个浮动的索引 - ( NSArray *)sectionIndexTitlesForTableView:( UITableView *)tableView; cell相关: 1.返回表格中指定indexPath对应的cell - ( UITableViewCell *)cellForRowAtIndexPath:( NSIndexPath *)indexPath; 2.返回指定cell的indexPath - ( NSIndexPath *)indexPathForCell:( UITableViewCell *)cell; 3.返回表格中指定点所在的indexPath - ( NSIndexPath *)indexPathForRowAtPoint:( CGPoint )point; 4.返回表格中指定区域内所有indexPath 组成的数组 - ( NSArray *)indexPathsForRowsInRect:( CGRect )rect; 5.返回表格中所有可见区域内cell的数组 - ( NSArray *)visibleCells; 6.返回表格中所有可见区域内cell对应indexPath所组成的数组 - ( NSArray *)indexPathsForVisibleRows; 7.控制该表格滚动到指定indexPath对应的cell的顶端 中间 或者下方 - ( void )scrollToRowAtIndexPath:( NSIndexPath *)indexPath atScrollPosition:( UITableViewScrollPosition )scrollPosition animated:( BOOL )animated; 8.控制该表格滚动到选中cell的顶端 中间 或者下方 -( void )scrollToNearestSelectedRowAtScrollPosition:( UITableViewScrollPosition )scrollPosition animated:( BOOL )animated; 处理单元格的选中 1.@property ( nonatomic ) BOOL allowsSelection 控制该表格是否允许被选中 2. @property ( nonatomic ) BOOL allowsMultipleSelection 控制该表格是否允许多选 3. @property ( nonatomic ) BOOL allowsSelectionDuringEditing; 控制表格处于编辑状态时是否允许被选中 4. @property ( nonatomic ) BOOL allowsMultipleSelectionDuringEditing 控制表格处于编辑状态时是否允许被多选 5.获取选中cell对应的indexPath - ( NSIndexPath *)indexPathForSelectedRow; 6.获取所有被选中的cell对应的indexPath组成的数组 - ( NSArray *)indexPathsForSelectedRows 7.控制该表格选中指定indexPath对应的表格行,最后一个参数控制是否滚动到被选中行的顶端 中间 和底部 - ( void )selectRowAtIndexPath:( NSIndexPath *)indexPath animated:( BOOL )animated scrollPosition:( UITableViewScrollPosition )scrollPosition; 8.控制取消选中该表格中指定indexPath对应的表格行 - ( void )deselectRowAtIndexPath:( NSIndexPath *)indexPath animated:( BOOL )animated; <UITableViewDelegate> 9.当用户将要选中表格中的某行时触发方法 - ( NSIndexPath *)tableView:( UITableView *)tableView willSelectRowAtIndexPath:( NSIndexPath *)indexPath; 10.当用户完成选中表格中的某行时触发方法 -( void )tableView:( UITableView *)tableView didSelectRowAtIndexPath:( NSIndexPath *)indexPath 11.当用户将要取消选中表格中某行时触发 - ( NSIndexPath *)tableView:( UITableView *)tableView willDeselectRowAtIndexPath:( NSIndexPath *)indexPath 12.当用户完成取消选中表格中某行时触发 - ( void )tableView:( UITableView *)tableView didDeselectRowAtIndexPath:( NSIndexPath *)indexPath 关于对表格的编辑 1.对表格控件执行多个连续的插入,删除和移动操作之前调用这个方法开始更新 - ( void )beginUpdates; 2.对表格控件执行多个连续的插入,删除和移动操作之后调用这个方法结束 - ( void )endUpdates; 3.在一个或多个indexPath处插入cell - ( void )insertRowsAtIndexPaths:( NSArray *)indexPaths withRowAnimation:( UITableViewRowAnimation )animation; 4.删除一个或多个indexPath处的cell - ( void )deleteRowsAtIndexPaths:( NSArray *)indexPaths withRowAnimation:( UITableViewRowAnimation )animation; 5.将制定indexPath处的cell移动到另个一indexPath处 - ( void )moveRowAtIndexPath:( NSIndexPath *)indexPath toIndexPath:( NSIndexPath *)newIndexPath 6.指定的indexSet所包含的一个或多个分区号对应的位置插入分区 - ( void )insertSections:( NSIndexSet *)sections withRowAnimation:( UITableViewRowAnimation )animation; 7.删除指定indexSet所包含的一个或多个分区号所对应的分区 - ( void )deleteSections:( NSIndexSet *)sections withRowAnimation:( UITableViewRowAnimation )animation; 8.将指定分区移动到另一个位置 - ( void )moveSection:( NSInteger )section toSection:( NSInteger )newSection @protocol UITableViewDataSource< NSObject > 9.该方法返回值决定指定indexPath对应的cell是否可以编辑 - ( BOOL )tableView:( UITableView *)tableView canEditRowAtIndexPath:( NSIndexPath *)indexPath; 10.该方法返回值决定指定indexPath对应的cell是否可以移动 - ( BOOL )tableView:( UITableView *)tableView canMoveRowAtIndexPath:( NSIndexPath *)indexPath; 11.当用户对指定表格行编辑(包括插入和删除)时触发该方法 - ( void )tableView:( UITableView *)tableView commitEditingStyle:( UITableViewCellEditingStyle )editingStyle forRowAtIndexPath:( NSIndexPath *)indexPath; 12.该方法触发移动 通常对数据进行处理(重要) - ( void )tableView:( UITableView *)tableView moveRowAtIndexPath:( NSIndexPath *)sourceIndexPath toIndexPath:( NSIndexPath *)destinationIndexPath; @protocol UITableViewDelegate< NSObject , UIScrollViewDelegate > 13.开始/完成 编辑时调用的两个方法 - ( void )tableView:( UITableView *)tableView willBeginEditingRowAtIndexPath:( NSIndexPath *)indexPath; - ( void )tableView:( UITableView *)tableView didEndEditingRowAtIndexPath:( NSIndexPath *)indexPath; 14.该方法返回值决定了 indexPath处的cell 的编辑状态 返回值为枚举类型 分别为 None Delete Insert - ( UITableViewCellEditingStyle )tableView:( UITableView *)tableView editingStyleForRowAtIndexPath:( NSIndexPath *)indexPath; 15.该方法决定了 cell处于被编辑状态时是否应该缩进 若未重写 所有cell处于编辑状态时都会缩进 - ( BOOL )tableView:( UITableView *)tableView shouldIndentWhileEditingRowAtIndexPath:( NSIndexPath *)indexPath; UITableViewCell : UIView < NSCoding , UIGestureRecognizerDelegate > 这里涉及到自定义 UITableViewCell 以下为具体步骤以及需要注意到地方 1. 首先创建一个类继承 UITableViewCell 2. 把自定义 cell 上到自定义视图全部设置为属性(注意:属性名一定不要和系统属性命重复 e.g. imageView,textLable,detailTextLable ) 3. 在 cell 的初始化方法中 对自定义视图对属性初始化,在初始化对时候可以不指定 frame (注意,这里加载到视图上时 加载到 contentView 上 同时注意内存管理) 4. 在 layoutSubviews 方法中完成最后操作 通常给出 frame (注意,这个方法为系统自带方法,当一个 cell 显示到屏幕上之前,最后调用到一个方法, 所有 cell 到操作 包括赋值,调整高度等 都已经完成 一定不要忘记 [super layoutSubviews]; ) 附加: 当一个 cell 被选中的方法 - (void)setSelected:(BOOL)selected animated:(BOOL)animated 一些小操作: // 将单元格的边框设置为圆角 cell. layer . cornerRadius = 12 ; cell. layer . masksToBounds = YES ; |
|
来自: 叹落花 > 《UITableVIew》