【通达信】粘合突破,拉升前兆（一品茶缘指标）

 本帖最后由 红胜火 于 2009-4-24 14:24 编辑

{粘合突破指标使用技巧：
均线粘合先关注，放量上穿可买入；
阳穿多线是优选，长线走牛更选优！
多头发散要拉升，脱离粘合是飞行。}

{粘合突破----一品茶缘编写，副图指标}
{N:1,10,5;n表示均线之间的最大距离}
MA5:=MA(CLOSE,5);
MA10:=MA(CLOSE,10);
MA20:=MA(CLOSE,20);
MA30:=MA(CLOSE,30);
MA60:=MA(CLOSE,60);
MA90:=MA(CLOSE,90);
MA120:=MA(CLOSE,120);
MA250:=MA(CLOSE,250);
DTPL:=MA10>MA30 AND MA30>REF(MA30,1);
DG:=MAX(MAX(MA5,MA10),MAX(MA20,MA30));
ZG:=MAX(MAX(DG,MA60),MAX(MA90,MA120));
DD:=MIN(MIN(MA5,MA10),MIN(MA20,MA30));
ZD:=MIN(MIN(DD,MA60),MIN(MA90,MA120));
粘合:=(ZG/ZD-1)*100<N,POINTDOT,LINETHICK0;
高粘:=(ZG/ZD-1)*100<N AND ZD>MA250,POINTDOT,LINETHICK0;
穿5:(粘合 AND CROSS(C,MA5))*0.5;
穿10:(粘合 AND CROSS(C,MA10))*1;
穿20:(粘合 AND CROSS(C,MA20))*2;
穿30:(粘合 AND CROSS(C,MA30))*3;
FLSZ:=(C/REF(C,1)-1)*100>=2 AND V>REF(V,1);
DXTP:=((穿5/0.5)+穿10+(穿20/2)+(穿30/3))>=2;
优选:(FLSZ AND DXTP AND MA30>REF(MA30,1))*3,COLOR00FFFF,LINETHICK2;
选优:(FLSZ AND DXTP AND MA30>REF(MA30,1) AND COUNT(高粘,20)>=15)*3,COLOR0000FF,LINETHICK2;
JXDT:=MA5>MA10 AND MA10>MA20 AND MA20>MA30;
发散:(JXDT AND NOT(REF(JXDT,1)))*1,COLOR00FF00,LINETHICK2;
起飞:(NOT(粘合) AND REF(粘合,1) AND COUNT(粘合,20)>=15 AND DTPL)*3,COLORFF00FF,LINETHICK2;
{以下设置副图显示方式}
STICKLINE(粘合,-0.2,0,4,0),COLOR00FF00;
STICKLINE(高粘,0.2,0,4,0),COLORFF00FF;
DRAWTEXT(优选,3,'优●选'),COLOR00FFFF;
DRAWTEXT(发散,2,'发●散'),COLOR00FF00;
DRAWTEXT(起飞,3,'起●飞'),COLOR00FFFF;
DRAWICON(选优,0.3,1);
DRAWICON(起飞,3,1);
{粘合突破}指标信号含义：
1、高粘=均线粘合并且大于MA250；
2、优选=单日放量上涨+股价同时上穿2条以上均线+MA30趋势向上；
3、选优=优选目标+高位粘合；
4、发散=均线多头发散；
5、起飞=脱离粘合+多头发散，进入拉升浪！
====================================================================

{粘合突破----一品茶缘编写，副图指标}
{N:1,10,5;n表示均线之间的最大距离}
MA5:=MA(CLOSE,5);
MA10:=MA(CLOSE,10);
MA20:=MA(CLOSE,20);
MA30:=MA(CLOSE,30);
MA60:=MA(CLOSE,60);
MA90:=MA(CLOSE,90);
MA120:=MA(CLOSE,120);
MA250:=MA(CLOSE,250);
DG:=MAX(MAX(MA5,MA10),MAX(MA20,MA30));
ZG:=MAX(MAX(DG,MA60),MAX(MA90,MA120));
DD:=MIN(MIN(MA5,MA10),MIN(MA20,MA30));
ZD:=MIN(MIN(DD,MA60),MIN(MA90,MA120));
粘合区:(ZG/ZD-1)*100<N,POINTDOT;
突破5:(粘合区 AND CROSS(C,MA5))*0.5;
突破10:(粘合区 AND CROSS(C,MA10))*1;
突破20:(粘合区 AND CROSS(C,MA20))*2;
突破30:(粘合区 AND CROSS(C,MA30))*3;
FLSZ:=(C/REF(C,1)-1)*100>=2 AND V>REF(V,1);
DXTP:=((突破5/0.5)+突破10+(突破20/2)+(突破30/3))>=2;
优选:FLSZ AND DXTP AND MA30>REF(MA30,1),POINTDOT;

{以下设置副图显示方式}
STICKLINE(粘合区,-0.1,0.1,4,0),COLOR00FF00;
DRAWICON(优选,0.3,1);