|
Docker.io is the lightweight "container engine + image repository" built on top of LXC (linux lightweight containers) to ship any application.
As of writing this blog, the latest version is 0.5.3 . The project is actively being developed and things can change in near future. 
Docker.io 是轻量级的“容器引擎+映像仓库”，在LXC（linux轻量级容器）的基础上构建，可以运行任何应用程序。 的核心层由以下几个部分组成: 1、可执行程序，“/usr/bin/docker” 2、网站上有一系列创建好的操作系统和应用程序映像 3、AUFS（另一个统一文件系统）来实现文件系统的快照，文件变化，控制只读或读写的需求。 4、LXC（Linux轻量级容器） 5、Cgroups（各种资源和命名空间的管理） 在本文写作的时候，最新版本是0.5.3，但目前开发很活跃，一些功能和特性可能在新版本中会发生变化。 Follow these instructions to get installed on your system. [root@localhost ~]# cat /etc/selinux/config # This file controls the state of SELinux on the system. # SELINUX= can take one of these three values: # enforcing - SELinux security policy is enforced. # permissive - SELinux prints warnings instead of enforcing. # disabled - SELinux is fully disabled. SELINUX=disabled # SELINUXTYPE= type of policy in use. Possible values are: # targeted - Only targeted network daemons are protected. # strict - Full SELinux protection. SELINUXTYPE=targeted 2. Download and setup Fedora EPEL Repository sudo yum install http://ftp./Linux/fedora/epel/6/i386/epel-release-6-8.noarch.rpm cd /etc/yum.repos.d sudo wget http://www./yum/el6/hop5.repo 4. Install docker-io package [root@localhost ~]# yum install docker-io Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * base: centos.excellmedia.net * epel: kartolo.sby.datautama.net.id * extras: centos.excellmedia.net * updates: centos.excellmedia.net Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package docker-io.x86_64 0:0.5.3-4.el6 will be installed --> Processing Dependency: lxc >= 0.8.0 for package: docker-io-0.5.3-4.el6.x86_64 --> Processing Dependency: kernel-ml-aufs >= 3.10.5 for package: docker-io-0.5.3-4.el6.x86_64 --> Running transaction check ---> Package kernel-ml-aufs.x86_64 0:3.10.5-3.el6 will be installed ---> Package lxc.x86_64 0:0.8.0-3.el6 will be installed --> Processing Dependency: liblxc.so.0()(64bit) for package: lxc-0.8.0-3.el6.x86_64 --> Running transaction check ---> Package lxc-libs.x86_64 0:0.8.0-3.el6 will be installed --> Finished Dependency Resolution Dependencies Resolved ============================================================================================ Package Arch Version Repository Size ============================================================================================ Installing: docker-io x86_64 0.5.3-4.el6 hop5 1.2 M Installing for dependencies: kernel-ml-aufs x86_64 3.10.5-3.el6 hop5 33 M lxc x86_64 0.8.0-3.el6 hop5 81 k lxc-libs x86_64 0.8.0-3.el6 hop5 75 k Transaction Summary ============================================================================================ Install 4 Package(s) Total download size: 34 M Installed size: 159 M Is this ok [y/N]: y Downloading Packages: (1/4): docker-io-0.5.3-4.el6.x86_64.rpm | 1.2 MB 00:03 (2/4): kernel-ml-aufs-3.10.5-3.el6.x86_64.rpm | 33 MB 00:33 (3/4): lxc-0.8.0-3.el6.x86_64.rpm | 81 kB 00:00 (4/4): lxc-libs-0.8.0-3.el6.x86_64.rpm | 75 kB 00:00 -------------------------------------------------------------------------------------------- Total 896 kB/s | 34 MB 00:39 Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Installing : lxc-libs-0.8.0-3.el6.x86_64 1/4 Installing : lxc-0.8.0-3.el6.x86_64 2/4 Installing : kernel-ml-aufs-3.10.5-3.el6.x86_64 3/4 Installing : docker-io-0.5.3-4.el6.x86_64 4/4 Verifying : kernel-ml-aufs-3.10.5-3.el6.x86_64 1/4 Verifying : lxc-0.8.0-3.el6.x86_64 2/4 Verifying : lxc-libs-0.8.0-3.el6.x86_64 3/4 Verifying : docker-io-0.5.3-4.el6.x86_64 4/4 Installed: docker-io.x86_64 0:0.5.3-4.el6 Dependency Installed: kernel-ml-aufs.x86_64 0:3.10.5-3.el6 lxc.x86_64 0:0.8.0-3.el6 lxc-libs.x86_64 0:0.8.0-3.el6 Complete! [root@localhost ~]# 5. See the package is installed correctly [root@localhost ~]# docker -h Usage of docker: -D=false: Debug mode -H=[unix:///var/run/docker.sock]: tcp://host:port to bind/connect to or unix://path/to/socket to use -api-enable-cors=false: Enable CORS requests in the remote api. -b="": Attach containers to a pre-existing network bridge. Use 'none' to disable container networking -d=false: Daemon mode -dns="": Set custom dns servers -g="/var/lib/docker": Path to graph storage base dir. -p="/var/run/docker.pid": File containing process PID -r=false: Restart previously running containers 6. Add cgroup filesystem to /etc/fstab , so that docker will work correctly [root@localhost ~]# echo "none /sys/fs/cgroup cgroup defaults 0 0" >> /etc/fstab [root@localhost ~]# mount /sys/fs/cgroup Per "Peter Zimmerman" a reboot is needed to actually mount /sys/fs/cgroup (due to the kernel doesn't have cgroup support). So, the above mount step is not really needed. As its used only upon reboot. 译者信息
按下面的步骤安装： 0、安装centos6.x 1、因为selinux和LXC有冲突，所以需要禁用 [root@localhost ~]# cat /etc/selinux/config # This file controls the state of SELinux on the system. # SELINUX= can take one of these three values: # enforcing - SELinux security policy is enforced. # permissive - SELinux prints warnings instead of enforcing. # disabled - SELinux is fully disabled. SELINUX=disabled # SELINUXTYPE= type of policy in use. Possible values are: # targeted - Only targeted network daemons are protected. # strict - Full SELinux protection. SELINUXTYPE=targeted 2、配置Fedora EPEL 源
sudo yum install http://ftp./Linux/fedora/epel/6/i386/epel-release-6-8.noarch.rpm 3、配置源
cd /etc/yum.repos.d sudo wget http://www./yum/el6/hop5.repo 4、安装docker-io
[root@localhost ~]# yum install docker-io Loaded plugins: fastestmirror, security Loading mirror speeds from cached hostfile * base: centos.excellmedia.net * epel: kartolo.sby.datautama.net.id * extras: centos.excellmedia.net * updates: centos.excellmedia.net Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package docker-io.x86_64 0:0.5.3-4.el6 will be installed --> Processing Dependency: lxc >= 0.8.0 for package: docker-io-0.5.3-4.el6.x86_64 --> Processing Dependency: kernel-ml-aufs >= 3.10.5 for package: docker-io-0.5.3-4.el6.x86_64 --> Running transaction check ---> Package kernel-ml-aufs.x86_64 0:3.10.5-3.el6 will be installed ---> Package lxc.x86_64 0:0.8.0-3.el6 will be installed --> Processing Dependency: liblxc.so.0()(64bit) for package: lxc-0.8.0-3.el6.x86_64 --> Running transaction check ---> Package lxc-libs.x86_64 0:0.8.0-3.el6 will be installed --> Finished Dependency Resolution Dependencies Resolved ============================================================================================ Package Arch Version Repository Size ============================================================================================ Installing: docker-io x86_64 0.5.3-4.el6 hop5 1.2 M Installing for dependencies: kernel-ml-aufs x86_64 3.10.5-3.el6 hop5 33 M lxc x86_64 0.8.0-3.el6 hop5 81 k lxc-libs x86_64 0.8.0-3.el6 hop5 75 k Transaction Summary ============================================================================================ Install 4 Package(s) Total download size: 34 M Installed size: 159 M Is this ok [y/N]: y Downloading Packages: (1/4): docker-io-0.5.3-4.el6.x86_64.rpm | 1.2 MB 00:03 (2/4): kernel-ml-aufs-3.10.5-3.el6.x86_64.rpm | 33 MB 00:33 (3/4): lxc-0.8.0-3.el6.x86_64.rpm | 81 kB 00:00 (4/4): lxc-libs-0.8.0-3.el6.x86_64.rpm | 75 kB 00:00 -------------------------------------------------------------------------------------------- Total 896 kB/s | 34 MB 00:39 Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Installing : lxc-libs-0.8.0-3.el6.x86_64 1/4 Installing : lxc-0.8.0-3.el6.x86_64 2/4 Installing : kernel-ml-aufs-3.10.5-3.el6.x86_64 3/4 Installing : docker-io-0.5.3-4.el6.x86_64 4/4 Verifying : kernel-ml-aufs-3.10.5-3.el6.x86_64 1/4 Verifying : lxc-0.8.0-3.el6.x86_64 2/4 Verifying : lxc-libs-0.8.0-3.el6.x86_64 3/4 Verifying : docker-io-0.5.3-4.el6.x86_64 4/4 Installed: docker-io.x86_64 0:0.5.3-4.el6 Dependency Installed: kernel-ml-aufs.x86_64 0:3.10.5-3.el6 lxc.x86_64 0:0.8.0-3.el6 lxc-libs.x86_64 0:0.8.0-3.el6 Complete! [root@localhost ~]# 5、检查安装情况
[root@localhost ~]# docker -h Usage of docker: -D=false: Debug mode -H=[unix:///var/run/docker.sock]: tcp://host:port to bind/connect to or unix://path/to/socket to use -api-enable-cors=false: Enable CORS requests in the remote api. -b="": Attach containers to a pre-existing network bridge. Use 'none' to disable container networking -d=false: Daemon mode -dns="": Set custom dns servers -g="/var/lib/docker": Path to graph storage base dir. -p="/var/run/docker.pid": File containing process PID -r=false: Restart previously running containers 6、要想docker正常运行还需要在/etc/fstab里增加cgroup文件系统
[root@localhost ~]# echo "none /sys/fs/cgroup cgroup defaults 0 0" >> /etc/fstab [root@localhost ~]# mount /sys/fs/cgroup 只有重新启动才能挂载/sys/fs/cgroup（因为当前运行的内核不支持cgroup），所以上面挂载的命令也可以不执行，但系统需要重新启动。 7. Reboot the system ; make sure to select "3.10.5-3.el6.x86_64" kernel version while booting. [root@localhost ~]# uname -r 3.10.5-3.el6.x86_64 [root@localhost ~]# grep aufs /proc/filesystems nodev aufs 9. Start the in daemon mode (in a different terminal) [root@localhost ~]# docker -d 2013/08/21 07:47:07 WARNING: Your kernel does not support cgroup swap limit. 2013/08/21 07:47:07 Listening for HTTP on /var/run/docker.sock (unix) 10. Print hello world from a centos 6.4 container. [root@localhost ~]# docker run centos:6.4 echo "hello world" 2013/08/21 07:48:41 POST /v1.4/containers/create 2013/08/21 07:48:41 POST /v1.4/containers/c6bc9e80097e/start 2013/08/21 07:48:41 POST /v1.4/containers/c6bc9e80097e/attach?logs=1&stderr=1&stdout=1&stream=1 hello world 11. Ping from inside the container [root@localhost ~]# docker -dns '8.8.8.8' run centos:6.4 ping -c 3 yahoo.com 2013/08/21 08:02:15 POST /v1.4/containers/create 2013/08/21 08:02:15 POST /v1.4/containers/c40a1244f9bc/start 2013/08/21 08:02:15 POST /v1.4/containers/c40a1244f9bc/attach?logs=1&stderr=1&stdout=1&stream=1 PING yahoo.com (98.138.253.109) 56(84) bytes of data. 64 bytes from ir1.fp.vip.ne1.yahoo.com (98.138.253.109): icmp_seq=1 ttl=48 time=323 ms 64 bytes from ir1.fp.vip.ne1.yahoo.com (98.138.253.109): icmp_seq=2 ttl=48 time=329 ms 64 bytes from ir1.fp.vip.ne1.yahoo.com (98.138.253.109): icmp_seq=3 ttl=49 time=302 ms --- yahoo.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2304ms rtt min/avg/max/mdev = 302.032/318.318/329.656/11.807 ms TROUBLESHOOTING"DNS/Networking Errors inside the docker" [root@localhost ~]# docker -dns="8.8.8.8" run centos:6.4 yum install hiphop-php 2013/08/21 07:53:05 POST /v1.4/containers/create 2013/08/21 07:53:05 POST /v1.4/containers/6d9fef14bd1a/start 2013/08/21 07:53:05 POST /v1.4/containers/6d9fef14bd1a/attach?logs=1&stderr=1&stdout=1&stream=1 Loaded plugins: fastestmirror Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again Could not retrieve mirrorlist http://mirrorlist./?release=6&arch=x86_64&repo=os error was 14: PYCURL ERROR 6 - "Couldn't resolve host 'mirrorlist.'" Please issue the following commands, so that docker and its environment will be reset and above issue will be taken care of. pkill docker iptables -t nat -F ifconfig docker0 down brctl delbr docker0 docker -d CREDITS: Thanks to sciurus for doing the hardwork in creating the spec file for kernel-ml-aufs. 译者信息
7、重启系统，选择“3.10.5-3.el6.x86_64”内核 8、系统启动后，确认当前运行的内核 [root@localhost ~]# uname -r 3.10.5-3.el6.x86_64 [root@localhost ~]# grep aufs /proc/filesystems nodev aufs 9、以守护模式运行（在一个新的终端里） [root@localhost ~]# docker -d 2013/08/21 07:47:07 WARNING: Your kernel does not support cgroup swap limit. 2013/08/21 07:47:07 Listening for HTTP on /var/run/docker.sock (unix) 10、在centos6.4容器里输出hello world
[root@localhost ~]# docker run centos:6.4 echo "hello world" 2013/08/21 07:48:41 POST /v1.4/containers/create 2013/08/21 07:48:41 POST /v1.4/containers/c6bc9e80097e/start 2013/08/21 07:48:41 POST /v1.4/containers/c6bc9e80097e/attach?logs=1&stderr=1&stdout=1&stream=1 hello world 11、从容器里测试ping
[root@localhost ~]# docker -dns '8.8.8.8' run centos:6.4 ping -c 3 yahoo.com 2013/08/21 08:02:15 POST /v1.4/containers/create 2013/08/21 08:02:15 POST /v1.4/containers/c40a1244f9bc/start 2013/08/21 08:02:15 POST /v1.4/containers/c40a1244f9bc/attach?logs=1&stderr=1&stdout=1&stream=1 PING yahoo.com (98.138.253.109) 56(84) bytes of data. 64 bytes from ir1.fp.vip.ne1.yahoo.com (98.138.253.109): icmp_seq=1 ttl=48 time=323 ms 64 bytes from ir1.fp.vip.ne1.yahoo.com (98.138.253.109): icmp_seq=2 ttl=48 time=329 ms 64 bytes from ir1.fp.vip.ne1.yahoo.com (98.138.253.109): icmp_seq=3 ttl=49 time=302 ms --- yahoo.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2304ms rtt min/avg/max/mdev = 302.032/318.318/329.656/11.807 ms 常见错误： "DNS/Networking Errors inside the docker"
[root@localhost ~]# docker -dns="8.8.8.8" run centos:6.4 yum install hiphop-php 2013/08/21 07:53:05 POST /v1.4/containers/create 2013/08/21 07:53:05 POST /v1.4/containers/6d9fef14bd1a/start 2013/08/21 07:53:05 POST /v1.4/containers/6d9fef14bd1a/attach?logs=1&stderr=1&stdout=1&stream=1 Loaded plugins: fastestmirror Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again Could not retrieve mirrorlist http://mirrorlist./?release=6&arch=x86_64&repo=os error was 14: PYCURL ERROR 6 - "Couldn't resolve host 'mirrorlist.'" 可以执行下面的命令来重置docker的运行环境，从而解决上述问题。
pkill docker iptables -t nat -F ifconfig docker0 down brctl delbr docker0 docker -d 感谢sciurus在创建kernel-ml-aufs的相关文件时付出的辛勤工作。 |
|
|
来自： 浸心阁 > 《centos 6.4》
