通达信之分时奔涨停选股警告

奔涨停分时副图源码：

ST:(EXPMA(CLOSE,500)-REF(EXPMA(CLOSE,500),1))/REF(EXPMA(CLOSE,500),1)*100,COLORSTICK; DRAWICON(CROSS(EXPMA(ST,12)-0.0006,EXPMA(ST,200)),EXPMA(ST,200)*1,13);
DRAWTEXT(CROSS(EXPMA(ST,12)-0.0006,EXPMA(ST,200)),EXPMA(ST,200)*0.8,'B金叉'),COLORYELLOW;
灰色主力:EXPMA( (EXPMA(CLOSE,500)-REF(EXPMA(CLOSE,500),1))/REF(EXPMA(CLOSE,500),1)
*100,12)-0.0004,LINETHICK1,COLOR999999;
蓝色散户:EXPMA( (EXPMA(CLOSE,500)-REF(EXPMA(CLOSE,500),1))/REF(EXPMA(CLOSE,500),1)
*100,200),LINETHICK1,COLORFF6600;
BGTYU:=IF(DATE<=1150530,1,0);
GHYJKU:=BETWEEN((CLOSE*BGTYU)/(SUM(AMOUNT,BARSCOUNT((CLOSE*BGTYU)))/SUM(VOL*100,
BARSCOUNT((CLOSE*BGTYU)))),1.05,0.95);
VBNH:=IF(GHYJKU=0,MA((CLOSE*BGTYU),BARSCOUNT((CLOSE*BGTYU))),(SUM(AMOUNT,BARSCOUNT(
(CLOSE*BGTYU)))/SUM(VOL*100,BARSCOUNT((CLOSE*BGTYU)))));
DRAWTEXT(CROSS(EMA((CLOSE/VBNH),20),1.00),0.006,'拉升'),COLOR009900;
Q:=BETWEEN(C/(SUM(AMOUNT,BARSCOUNT(C))/SUM(VOL*100,BARSCOUNT(C))),1.05,0.99);
Q2:=IF(Q=0,MA(C,BARSCOUNT(C)),(SUM(AMOUNT,BARSCOUNT(C))/SUM(VOL*100,BARSCOUNT(C))));
奔涨停:DRAWICON(CROSS((C/Q2),1.00),0.001,15);
DRAWTEXT(LONGCROSS(灰色主力,蓝色散户,2),灰色主力*0.8,'B'),COLORYELLOW;
DRAWTEXT(LONGCROSS(蓝色散户,灰色主力,2),蓝色散户,'S'),COLORCCCC30;

去杂波选股预警公式：（当然你可以不去杂波不过那样出的股太多了）

灰色主力:=EXPMA( (EXPMA(CLOSE,500)-REF(EXPMA(CLOSE,500),1))/REF(EXPMA(CLOSE,500),1)
*100,12)-0.0004,LINETHICK1,COLOR999999;
蓝色散户:=EXPMA( (EXPMA(CLOSE,500)-REF(EXPMA(CLOSE,500),1))/REF(EXPMA(CLOSE,500),1)
*100,200),LINETHICK1,COLORFF6600;
现价:=DYNAINFO(7);

均价:=DYNAINFO(11) (DYNAINFO(11)*0.021);

条件:IF(现价>均价,1,0)AND LONGCROSS(灰色主力,蓝色散户,2);

买入预警股时看下个股是不是顶部源码附图如下：当然看顶部的副图有很多了

VAR2:=LLV(LOW,10);
VAR3:=HHV(HIGH,25);
阶段卖出:=3.2,COLORCYAN;
STICKLINE(C>0,3.2,3.2,1,1),COLORFF1199;
清仓卖出: 3.5,COLOR0088FF;
动力线:= EMA((CLOSE-VAR2)/(VAR3-VAR2)*4,4);
STICKLINE(动力线>REF(动力线,1) ,动力线 ,REF(动力线,1),2 ,1),COLORRED;
STICKLINE(动力线<=REF(动力线,1) ,动力线 ,REF(动力线,1),2 ,1),COLORGREEN;
底部介入:0.2,COLORGREEN;
重点关注:=0.5,COLOR0FFFFF;
STICKLINE(C>0,0.50,0.50,1,1),COLOR1AFFFF;
DRAWICON( FILTER(CROSS(动力线,重点关注),20),动力线 0.02 ,1);
DRAWICON( FILTER(CROSS(清仓卖出,动力线),20),动力线 0.02,2);
DRAWICON( FILTER(CROSS(动力线,底部介入),20),动力线 0.02 ,1);
DRAWICON( FILTER(CROSS(阶段卖出,动力线),20),动力线 0.02,2);
强弱分界线:1.75,POINTDOT,LINETHICK2,COLORFF80FF;
数值:动力线,COLORA8A8A8;
STICKLINE(动力线>REF(动力线,1) AND 动力线>3.49.8 ,动力线 ,REF
(动力线,1),2.5,0),COLOR1EFFFF;
STICKLINE(动力线<=REF(动力线,1) AND REF(动力线,1)>3.49.8 ,动力线 ,REF
(动力线,1),2.5,0),COLOR1EFFFF;
STICKLINE(动力线<0.5,动力线 ,REF(动力线,1),2.5,0),COLOR0080FF;
STICKLINE(动力线<=REF(动力线,1) AND REF(动力线,1)<0.5 ,动力线 ,REF
(动力线,1),2.5,0),COLOR0080FF;
DRAWTEXT(CROSS(数值,0.50),2.5,'异'),COLORYELLOW;
DRAWTEXT(CROSS(数值,0.50),2,'动'),COLORB47DFF;
DRAWTEXT(CROSS(数值,0.50),1.5,'区'),COLOR00C0FF;

下面我说下一个小技巧有关分时预警的。工具---系统设置--设置1---涨速周期分钟数   把它设置成3分钟