|
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.21-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #911 SMP Thu Sep 15 14:22:38 BST 2016 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] cma: Reserved 8 MiB at 0x3a800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 241664 [ 0.000000] free_area_init_node: node 0, pgdat 808c2f40, node_mem_map b9fa6000 [ 0.000000] Normal zone: 2124 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 241664 pages, LIFO batch:31 [ 0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010) [ 0.000000] [bcm2709_smp_init_cpus] ncores=4 [ 0.000000] PERCPU: Embedded 13 pages/cpu @b9f62000 s22592 r8192 d22464 u53248 [ 0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540 [ 0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2709.boardrev=0xa22082 bcm2709.serial=0xf75a9732 smsc95xx.macaddr=B8:27:EB:5A:97:32 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 939072K/966656K available (6348K kernel code, 432K rwdata, 1716K rodata, 476K init, 764K bss, 19392K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff800000 (1088 MB) lowmem : 0x80000000 - 0xbb000000 ( 944 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x807e854c (8066 kB) .init : 0x807e9000 - 0x80860000 ( 476 kB) .data : 0x80860000 - 0x808cc250 ( 433 kB) .bss : 0x808cf000 - 0x8098e1ec ( 765 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000025] Switching to timer-based delay loop, resolution 52ns [ 0.000285] Console: colour dummy device 80x30 [ 0.001339] console [tty1] enabled [ 0.001384] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001453] pid_max: default: 32768 minimum: 301 [ 0.001792] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001835] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002786] Disabling cpuset control group subsystem [ 0.002843] Initializing cgroup subsys io [ 0.002893] Initializing cgroup subsys memory [ 0.002958] Initializing cgroup subsys devices [ 0.003001] Initializing cgroup subsys freezer [ 0.003042] Initializing cgroup subsys net_cls [ 0.003112] CPU: Testing write buffer coherency: ok [ 0.003198] ftrace: allocating 21220 entries in 63 pages [ 0.051429] CPU0: update cpu_capacity 1024 [ 0.051493] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.051526] [bcm2709_smp_prepare_cpus] enter [ 0.051685] Setting up static identity map for 0x8240 - 0x8274 [ 0.053320] [bcm2709_boot_secondary] cpu:1 started (0) 16 [ 0.053536] [bcm2709_secondary_init] enter cpu:1 [ 0.053579] CPU1: update cpu_capacity 1024 [ 0.053585] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.053958] [bcm2709_boot_secondary] cpu:2 started (0) 17 [ 0.054122] [bcm2709_secondary_init] enter cpu:2 [ 0.054143] CPU2: update cpu_capacity 1024 [ 0.054149] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.054505] [bcm2709_boot_secondary] cpu:3 started (0) 16 [ 0.054635] [bcm2709_secondary_init] enter cpu:3 [ 0.054655] CPU3: update cpu_capacity 1024 [ 0.054661] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.054722] Brought up 4 CPUs [ 0.054819] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.054848] CPU: All CPU(s) started in HYP mode. [ 0.054874] CPU: Virtualization extensions available. [ 0.055510] devtmpfs: initialized [ 0.066456] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.066824] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.067577] pinctrl core: initialized pinctrl subsystem [ 0.068108] NET: Registered protocol family 16 [ 0.073274] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.080155] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.080203] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.080377] Serial: AMBA PL011 UART driver [ 0.080528] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe [ 0.080726] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.143551] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1 [ 0.144149] SCSI subsystem initialized [ 0.144355] usbcore: registered new interface driver usbfs [ 0.144466] usbcore: registered new interface driver hub [ 0.144585] usbcore: registered new device driver usb [ 0.150988] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-09-21 13:13 [ 0.178121] clocksource: Switched to clocksource arch_sys_counter [ 0.222780] FS-Cache: Loaded [ 0.223072] CacheFiles: Loaded [ 0.235329] NET: Registered protocol family 2 [ 0.236202] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.236339] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.236550] TCP: Hash tables configured (established 8192 bind 8192) [ 0.236664] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.236731] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.236980] NET: Registered protocol family 1 [ 0.237316] RPC: Registered named UNIX socket transport module. [ 0.237349] RPC: Registered udp transport module. [ 0.237376] RPC: Registered tcp transport module. [ 0.237403] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.238485] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 0.239826] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.253051] VFS: Disk quotas dquot_6.6.0 [ 0.253382] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.255631] FS-Cache: Netfs 'nfs' registered for caching [ 0.256546] NFS: Registering the id_resolver key type [ 0.256620] Key type id_resolver registered [ 0.256648] Key type id_legacy registered [ 0.259011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.259176] io scheduler noop registered [ 0.259217] io scheduler deadline registered (default) [ 0.259290] io scheduler cfq registered [ 0.261808] BCM2708FB: allocated DMA memory fac00000 [ 0.261855] BCM2708FB: allocated DMA channel 0 @ f3007000 [ 0.271486] Console: switching to colour frame buffer device 80x30 [ 1.157255] bcm2835-rng 3f104000.rng: hwrng registered [ 1.160183] vc-cma: Videocore CMA driver [ 1.162890] vc-cma: vc_cma_base = 0x00000000 [ 1.165545] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 1.168181] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 1.171004] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 1.190956] brd: module loaded [ 1.202105] loop: module loaded [ 1.205556] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0 [ 1.209668] Loading iSCSI transport class v2.0-870. [ 1.212890] usbcore: registered new interface driver smsc95xx [ 1.215541] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.418384] Core Release: 2.80a [ 1.420917] Setting default values for core params [ 1.423502] Finished setting default values for core params [ 1.626501] Using Buffer DMA mode [ 1.629069] Periodic Transfer Interrupt Enhancement - disabled [ 1.631639] Multiprocessor Interrupt Enhancement - disabled [ 1.634229] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 1.636830] Dedicated Tx FIFOs mode [ 1.639716] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024 [ 1.645173] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 1.658588] dwc_otg: Microframe scheduler enabled [ 1.658643] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80447364 [ 1.661504] WARN::hcd_init_fiq:414: FIQ ASM at 0x804476d4 length 36 [ 1.664297] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb9c8000 [ 1.667050] dwc_otg 3f980000.usb: DWC OTG Controller [ 1.669820] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 1.675309] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 1.678157] Init: Port Power? op_state=1 [ 1.680891] Init: Power Port (0) [ 1.683742] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.686523] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.691972] usb usb1: Product: DWC OTG Controller [ 1.694741] usb usb1: Manufacturer: Linux 4.4.21-v7+ dwc_otg_hcd [ 1.697525] usb usb1: SerialNumber: 3f980000.usb [ 1.701056] hub 1-0:1.0: USB hub found [ 1.703782] hub 1-0:1.0: 1 port detected [ 1.707020] dwc_otg: FIQ enabled [ 1.707029] dwc_otg: NAK holdoff enabled [ 1.707037] dwc_otg: FIQ split-transaction FSM enabled [ 1.707076] Module dwc_common_port init [ 1.707327] usbcore: registered new interface driver usb-storage [ 1.710324] mousedev: PS/2 mouse device common for all mice [ 1.713668] bcm2835-cpufreq: min=600000 max=1200000 [ 1.716577] sdhci: Secure Digital Host Controller Interface driver [ 1.719302] sdhci: Copyright(c) Pierre Ossman [ 1.722321] sdhost: log_buf @ bac13000 (fac13000) [ 1.778151] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 1.783149] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 1.785903] mmc-bcm2835 3f300000.mmc: DMA channel allocated [ 1.834990] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.838238] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.838624] ledtrig-cpu: registered to indicate activity on CPUs [ 1.838735] hidraw: raw HID events driver (C) Jiri Kosina [ 1.838913] usbcore: registered new interface driver usbhid [ 1.838916] usbhid: USB HID core driver [ 1.839435] Initializing XFRM netlink socket [ 1.839466] NET: Registered protocol family 17 [ 1.839602] Key type dns_resolver registered [ 1.840093] Registering SWP/SWPB emulation handler [ 1.840903] registered taskstats version 1 [ 1.841096] vc-sm: Videocore shared memory driver [ 1.841104] [vc_sm_connected_init]: start [ 1.849364] [vc_sm_connected_init]: end - returning 0 [ 1.850716] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 1.851087] of_cfs_init [ 1.851162] of_cfs_init: OK [ 1.886756] Waiting for root device /dev/mmcblk0p7... [ 1.888455] mmc0: new high speed SDHC card at address 0001 [ 1.889026] mmcblk0: mmc0:0001 00000 29.8 GiB [ 1.894315] mmcblk0: p1 p2 < p5 p6 p7 > [ 1.898229] Indeed it is in host mode hprt0 = 00021501 [ 1.913024] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.917136] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.918822] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) [ 1.918867] VFS: Mounted root (ext4 filesystem) readonly on device 179:7. [ 1.928475] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.933385] devtmpfs: mounted [ 1.933797] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.939224] Freeing unused kernel memory: 476K (807e9000 - 80860000) [ 2.024931] mmc1: new high speed SDIO card at address 0001 [ 2.078169] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 2.081073] Indeed it is in host mode hprt0 = 00001101 [ 2.178040] random: systemd: uninitialized urandom read (16 bytes read, 28 bits of entropy available) [ 2.187750] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 2.194275] systemd[1]: Detected architecture 'arm'. [ 2.278435] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 2.281678] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.285663] hub 1-1:1.0: USB hub found [ 2.288977] hub 1-1:1.0: 5 ports detected [ 2.317650] NET: Registered protocol family 10 [ 2.322303] systemd[1]: Inserted module 'ipv6' [ 2.328316] systemd[1]: Set hostname to <raspberrypi>. [ 2.462626] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 63 bits of entropy available) [ 2.533488] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available) [ 2.541186] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available) [ 2.549229] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available) [ 2.568189] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 2.571416] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available) [ 2.572174] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available) [ 2.572316] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available) [ 2.605955] random: systemd: uninitialized urandom read (16 bytes read, 68 bits of entropy available) [ 2.614847] random: systemd: uninitialized urandom read (16 bytes read, 68 bits of entropy available) [ 2.688513] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 2.692305] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.702749] smsc95xx v1.0.4 [ 2.722670] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 2.730927] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 2.738798] systemd[1]: Starting Remote File Systems (Pre). [ 2.747004] systemd[1]: Reached target Remote File Systems (Pre). [ 2.751067] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 2.764508] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.772161] systemd[1]: Starting Encrypted Volumes. [ 2.781355] systemd[1]: Reached target Encrypted Volumes. [ 2.781421] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5a:97:32 [ 2.792485] systemd[1]: Starting Swap. [ 2.799858] systemd[1]: Reached target Swap. [ 2.803339] systemd[1]: Expecting device dev-mmcblk0p6.device... [ 2.810545] systemd[1]: Starting Root Slice. [ 2.817636] systemd[1]: Created slice Root Slice. [ 2.821071] systemd[1]: Starting User and Session Slice. [ 2.828061] systemd[1]: Created slice User and Session Slice. [ 2.831368] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 2.838339] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.841676] systemd[1]: Starting Delayed Shutdown Socket. [ 2.848526] systemd[1]: Listening on Delayed Shutdown Socket. [ 2.851760] systemd[1]: Starting Journal Socket (/dev/log). [ 2.858395] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.861577] systemd[1]: Starting udev Control Socket. [ 2.868080] systemd[1]: Listening on udev Control Socket. [ 2.868160] usb 1-1.3: new low-speed USB device number 4 using dwc_otg [ 2.874287] systemd[1]: Starting udev Kernel Socket. [ 2.880858] systemd[1]: Listening on udev Kernel Socket. [ 2.884032] systemd[1]: Starting Journal Socket. [ 2.890613] systemd[1]: Listening on Journal Socket. [ 2.893814] systemd[1]: Starting System Slice. [ 2.900369] systemd[1]: Created slice System Slice. [ 2.903530] systemd[1]: Starting File System Check on Root Device... [ 2.938667] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 2.945959] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 2.949294] systemd[1]: Starting system-getty.slice. [ 2.956397] systemd[1]: Created slice system-getty.slice. [ 2.959841] systemd[1]: Starting Increase datagram queue length... [ 2.969671] systemd[1]: Starting Restore / save the current clock... [ 2.981898] systemd[1]: Mounting POSIX Message Queue File System... [ 2.992523] systemd[1]: Mounting Debug File System... [ 2.996504] usb 1-1.3: New USB device found, idVendor=093a, idProduct=2510 [ 2.996514] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.996521] usb 1-1.3: Product: USB Optical Mouse [ 2.996528] usb 1-1.3: Manufacturer: PixArt [ 3.003593] input: PixArt USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:093A:2510.0001/input/input0 [ 3.004077] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-3f980000.usb-1.3/input0 [ 3.046519] systemd[1]: Started Set Up Additional Binary Formats. [ 3.050275] systemd[1]: Starting udev Coldplug all Devices... [ 3.061818] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 3.076187] systemd[1]: Mounted Huge Pages File System. [ 3.117584] systemd[1]: Starting Load Kernel Modules... [ 3.127757] systemd[1]: Starting Slices. [ 3.135349] systemd[1]: Reached target Slices. [ 3.144556] systemd[1]: Mounted Debug File System. [ 3.152179] systemd[1]: Mounted POSIX Message Queue File System. [ 3.160929] systemd[1]: Started Increase datagram queue length. [ 3.182654] fuse init (API version 7.23) [ 3.192761] systemd[1]: Started Restore / save the current clock. [ 3.204578] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 3.219119] i2c /dev entries driver [ 3.223180] systemd[1]: Time has been changed [ 3.231663] systemd[1]: Started Load Kernel Modules. [ 3.258003] systemd[1]: Started udev Coldplug all Devices. [ 3.258215] usb 1-1.5: new low-speed USB device number 5 using dwc_otg [ 3.313143] systemd[1]: Started File System Check on Root Device. [ 3.376057] usb 1-1.5: New USB device found, idVendor=1c4f, idProduct=0002 [ 3.379372] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.385707] usb 1-1.5: Product: USB Keyboard [ 3.388923] usb 1-1.5: Manufacturer: SIGMACHIP [ 3.393194] systemd[1]: Starting Apply Kernel Variables... [ 3.403543] input: SIGMACHIP USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:1C4F:0002.0002/input/input1 [ 3.449062] systemd[1]: Mounting Configuration File System... [ 3.458961] systemd[1]: Mounting FUSE Control File System... [ 3.469377] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-3f980000.usb-1.5/input0 [ 3.469760] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.477479] systemd[1]: Starting Syslog Socket. [ 3.479354] input: SIGMACHIP USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:1C4F:0002.0003/input/input2 [ 3.481808] systemd[1]: Listening on Syslog Socket. [ 3.482005] systemd[1]: Starting Journal Service... [ 3.492943] systemd[1]: Started Journal Service. [ 3.538523] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-3f980000.usb-1.5/input1 [ 3.657942] systemd-udevd[138]: starting version 215 [ 4.162887] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 4.175378] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 4.273728] EXT4-fs (mmcblk0p7): re-mounted. Opts: (null) [ 4.453850] usbcore: registered new interface driver brcmfmac [ 4.589296] random: nonblocking pool is initialized [ 4.608956] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7 [ 4.630040] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 4.731428] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 4.731452] cfg80211: World regulatory domain updated: [ 4.731461] cfg80211: DFS Master region: unset [ 4.731470] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 4.731485] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.731497] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 4.731509] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 4.731524] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 4.731555] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 4.731567] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 4.731580] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 4.731592] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 5.032524] systemd-journald[136]: Received request to flush runtime journal from PID 1 [ 5.750257] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 5.750530] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.385177] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7.386082] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 8.569799] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists [ 8.569819] brcmfmac: brcmf_add_if: ignore IF event [ 8.575177] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.575224] brcmfmac: power management disabled [ 8.696324] uart-pl011 3f201000.uart: no DMA platform data [ 9.140718] Adding 102396k swap on /var/swap. Priority:-1 extents:2 across:110588k SSFS [ 9.490855] cfg80211: Regulatory domain changed to country: GB [ 9.490876] cfg80211: DFS Master region: ETSI [ 9.490887] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 9.490901] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 9.490917] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 9.490931] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 9.490944] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [ 9.490956] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 10.154988] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 10.188016] cfg80211: Regulatory domain changed to country: CN [ 10.188039] cfg80211: DFS Master region: FCC [ 10.188050] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 10.188199] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 10.188241] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A) [ 10.188256] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 10.188277] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 10.188290] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 10.188302] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A) [ 10.188315] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 13.455573] Bluetooth: Core ver 2.21 [ 13.455664] NET: Registered protocol family 31 [ 13.455674] Bluetooth: HCI device and connection manager initialized [ 13.455696] Bluetooth: HCI socket layer initialized [ 13.455713] Bluetooth: L2CAP socket layer initialized [ 13.455752] Bluetooth: SCO socket layer initialized [ 13.474531] Bluetooth: HCI UART driver ver 2.3 [ 13.474552] Bluetooth: HCI UART protocol H4 registered [ 13.474562] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 13.474741] Bluetooth: HCI UART protocol BCM registered [ 13.622412] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.622431] Bluetooth: BNEP filters: protocol multicast [ 13.622455] Bluetooth: BNEP socket layer initialized [ 49.532709] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null) |
|
|
