Matlab 2010b simulink仿真

Matlab 2010b simulink仿真时出现模型错误

At time 2.56344397565794e-005, simulation hits (1000) consecutive zero crossings. Consecutive zero crossings will slow down the simulation or cause the simulation to hang. To continue the simulation, you may 1) Try using Adaptive zero-crossing detection algorithm or 2) Disable the zero crossing of the blocks shown in the following table.

 

 

解决方法：

在simulation->configuration parameters->solver里面,右下角有个Algorithe, 默认为“Nonadaptive”,改为"adaptive"