|
iowait很大的原因是什么linux下在有大量网络通讯情况下,使用top命令看到iowait非常大,达到98%。,高速cpu会造成很高的iowait值，但这并不代表磁盘是系统的瓶颈。唯一能说明磁盘是系统瓶颈的方法，就是很高的read/write时间，一般来说超过20ms，就代表了不太正常的磁盘性能 I/O问题一直是一个比较难定位的问题，今天线上环境遇到了I/O 引起的CPU负载问题，看到了如下这篇比较好的文章，完饭后的我还在和西红柿和黄瓜在减肥的路上抗争，正好将原文翻译成中文，供广大同胞品鉴 Linux 有许多可用来查找问题的简单工具，也有许多是更高级的 I/O Wait is an issue that requires use of some of the more advanced tools as well as an advanced usage of some of the basic tools. The reason I/O Wait is difficult to troubleshoot is due to the fact that by default there are plenty of tools to tell you that your system is I/O bound, but not as many that can narrow the problem to a specific process or processes. I/O Wait 就是一个需要使用高级的工具来debug的问题，当然也有许多基本工具的高级用法。I/O wait的问题难以定位的原因是因为我们有很多工具可以告诉你说I/O 受限了，但是并没有告诉你具体是那个进程引起的（哪些进程们） Answering whether or not I/O is causing system slowness 确认是否是I/O问题导致系统缓慢 To identify whether I/O is causing system slowness you can use several commands but the easiest is the unix command top. 确认是否是I/O导致的系统缓慢我们可以使用多个命令，但是，最简单的是unix的命令 top
从Cpu一行我们可以看到浪费在I/O Wait上的CPU百分比；这个数字越高说明越多的CPU资源在等待I/O权限 wa -- iowait 查找那块磁盘正在被写入 The above top command shows I/O Wait from the system as a whole but it does not tell you what disk is being affected; for this we will use the iostatcommand. 上边的top命令从一个整体上说明了I/O wait，但是并没有说明是哪块磁盘影响的，想知道是哪块磁盘引发的问题，我们用到了另外一个命令 iostat 命令
上边的例子中，iostat 会每2秒更新一次，一共打印5次信息， -x 的选项是打印出扩展信息 The 1st report from iostat will print statistics based on the last time the system was booted; for this reason in most circumstances the first report from iostat should be ignored. Every sub-sequential report printed will be based on the time since the previous interval. For example in our command we will print a report 5 times, the 2nd report are disk statistics gathered since the 1st run of the report, the 3rd is based from the 2nd and so on. 第一个iostat 报告会打印出系统最后一次启动后的统计信息，这也就是说，在多数情况下，第一个打印出来的信息应该被忽略，剩下的报告，都是基于上一次间隔的时间。举例子来说，这个命令会打印5次，第二次的报告是从第一次报告出来一个后的统计信息，第三次是基于第二次 ，依次类推 In the above example the %utilized for sda is 111.41% this is a good indicator that our problem lies with processes writing to sda. While the test system in my example only has 1 disk this type of information is extremely helpful when the server has multiple disks as this can narrow down the search for which process is utilizing I/O. 在上面的例子中，sda的%utilized 是111.41%，这个很好的说明了有进程正在写入到sda磁盘中。因为例子中的测试系统只有一块磁盘，当一个服务器中有多快磁盘的时候，这个命令可以很好的缩小我们需要查找的进程的范围 Aside from %utilized there is a wealth of information in the output of iostat; items such as read and write requests per millisecond(rrqm/s & wrqm/s), reads and writes per second (r/s & w/s) and plenty more. In our example our program seems to be read and write heavy this information will be helpful when trying to identify the offending process. 除了%utilized 外，我们可以得到更改丰富的资源从iostat，例如每毫秒读写请求（rrqm/s & wrqm/s)），每秒读写的（(r/s & w/s)，当然还有更多。在上边的例子中，我们的项目看起来正在读写非常多的信息。这个对我们查找相应的进程非常有用。 Finding the processes that are causing high I/O 查找引起高I/O wait 对应的进程 iotop # iotop 最简单的方式来发现罪魁祸首是使用命令iotop，通过查看iotop的统计信息，我们可以很容易的指导bonnie++就是罪魁祸首 While iotop is a great command and easy to use, it is not installed on all (or the main) Linux distributions by default; and I personally prefer not to rely on commands that are not installed by default. A systems administrator may find themselves on a system where they simply cannot install the non-defualt packages until a scheduled time which may be far too late depending on the issue. 虽然iotop是一个非常强大的工具，并且使用简单，但是它并不是默认安装在所有的linux操作系统中。并且我个人倾向不要太依赖那些默认没有安装的命令。一个系统管理员可能会发现他无法立即安装额外的除默认程序之外的软件，除非等到后边的维护的时间。 If iotop is not available the below steps will also allow you to narrow down the offending process/processes. 如果iotop并没有安装，下面的步骤会教会你如何缩小目标进程的范围 Process list “state” 进程的状态 The ps command has statistics for memory and cpu but it does not have a statistic for disk I/O. While it may not have a statistic for I/O it does show the processes state which can be used to indicate whether or not a process is waiting for I/O. ps 命令对内存和CPU有一个统计，但是他没有对磁盘I/O的统计，虽然他没有显示磁盘I/O，但是它显示进行的状态，我们可以用来知道一个进程是否正在等待I/O The ps state field provides the processes current state; below is a list of states from the man page. ps state状态来表示了process现在的状态，下面是各个状态的帮助文档
那些等待I/O的进程的状态一般是“uninterruptible sleep”，或者“D”，我们可以很容易的查找到正在等待I/O的进程 Example: # for x in `seq 1 1 10`; do ps -eo state,pid,cmd | grep "^D"; echo "----"; sleep 5; done 上边的例子会循环的输出状态是D的进程，每5秒一次，一共10次 From the output above the bonnie++ process with a pid of 16528 is waiting for I/O more often than any other process. At this point the bonnie++ seems likely to be causing the I/O Wait, but just because the process is in an uninterruptible sleep state does not necessarily prove that it is the cause of I/O wait. 从输出我们可以知道 bonnie++ 的pid是16528 ，它比其他的进程更可疑，它老师在waiting，这个时候，bonnie++貌似就是我们想找到的进程，但是，单纯从它的状态，我们没有办法证明是bonnie++引起的I/O问题 To help confirm our suspicions we can use the /proc file system. Within each processes directory there is a file called “io” which holds the same I/O statistics that iotop is utilizing. 为了确认我们的怀疑，我们可以使用 /proc文件系统，每个进程目录下都有一个叫io的文件，里边保存这和iotop类似的信息
read_bytes和write_bytes是这个进程从磁盘读写的字节，在这个例子中，bonnie++进程读取了46M的数据并且写入了524的数据到磁盘上。这样的数据对于其他的进程可能并不是很多，但是在我们例子中，这足够引发系统的问题。 Finding what files are being written too heavily 查找那个文件引起的I/Owait The lsof command will show you all of the files open by a specific process or all processes depending on the options provided. From this list one can make an educated guess as to what files are likely being written to often based on the size of the file and the amounts present in the “io” file within /proc. lsof 命令可以展示一个进程打开的所有文件，或者打开一个文件的所有进程。从这个列表中，我们可以找到具体是什么文件被写入，根据文件的大小和/proc中io文件的具体数据 （这段翻译的有点绕，翻译好的直接留言好了http://www.） To narrow down the output we will use the -p <pid> options to print only files open by the specific process id. 我们可以使用-p <pid>的方式来减少输出，pid是具体的进程
为了更深入的确认这些文件被频繁的读写，我们可以通过如下命令来查看
从上面的命令结果来看，我们可以确定/tmp 是我们环境的逻辑磁盘的根目录
通过pvdisplay我们能看到/dev/sda5其实就是我们用来创建逻辑磁盘的具体磁盘。通过以上的信息我们可以放心的说lsof的结果就是我们要查找的文件 |
|
|
