本文描述如何为Linux实例的全新数据盘创建一个单分区并挂载文件系统。您也可以根据业务需要,对数据盘进行多分区配置。 在格式化Linux实例的数据盘之前,请做好以下准备工作: 单独购买的数据盘必须挂载数据盘后才能格式化。随实例一起购买的数据盘,无需挂载。如何挂载数据盘,请参见挂载云盘。 在ECS控制台的云盘页面中,选择更多 > 修改属性查看数据盘的设备名。 说明: 数据盘的设备名默认由系统分配,I/O优化实例的数据盘设备名从/dev/vdb递增排列,包括/dev/vdb−/dev/vdz。如果数据盘设备名为dev/xvd* (* 是a−z的任意一个字母),表示您使用的是非I/O优化实例。
本文操作仅适用小于等于2 TiB的数据盘。 本示例使用I/O优化实例,操作系统为CentOS 7.6,为一块新的20 GiB数据盘(设备名为/dev/vdb)创建一个单分区,分区格式使用MBR,挂载的是ext4文件系统。
格式化操作可能存在如下风险: 磁盘分区和格式化是高风险行为,请慎重操作。本文描述如何处理一块全新的数据盘,如果您的数据盘上有数据,请务必为数据盘创建快照,避免数据丢失。如何创建快照,请参见创建快照。 云服务器ECS仅支持数据盘分区操作,不支持系统盘分区操作。如果您强行使用第三方工具对系统盘做分区操作,可能引发系统崩溃和数据丢失等未知风险。仅允许在扩容系统盘后做扩展分区或新增分区操作,具体操作请参见扩展分区与文件系统_Linux系统盘。
远程连接ECS实例。具体步骤请参见连接ECS实例。 运行fdisk -l 命令查看实例上的数据盘。 说明: 执行命令后,如果不存在/dev/vdb,表示您的实例没有数据盘。确认数据盘是否已挂载。 依次运行以下命令,创建一个单分区数据盘。 [root@ecshost~ ]# fdisk -u /dev/vdb Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x3e60020e.
Command (m for help): p Disk /dev/vdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x3e60020e
Device Boot Start End Blocks Id System
Command (m for help): n Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p Partition number (1-4, default 1): 1 First sector (2048-41943039, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039):
Using default value 41943039
Partition 1 of type Linux and of size 20 GiB is set
Command (m for help): p Disk /dev/vdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x3e60020e
Device Boot Start End Blocks Id System
/dev/vdb1 2048 41943039 20970496 83 Linux
Command (m for help): w The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
运行fdisk -u /dev/vdb 命令:分区数据盘。 输入p:查看数据盘的分区情况。本示例中,数据盘没有分区。 输入n:创建一个新分区。 输入p:选择分区类型为主分区。 说明: 本示例中创建一个单分区数据盘,所以只需要创建主分区。如果要创建四个以上分区,您应该创建至少一个扩展分区,即选择e(extended)。 输入分区编号并按回车键。本示例中,仅创建一个分区,输入1。 输入第一个可用的扇区编号:按回车键采用默认值2048。 输入最后一个扇区编号。本示例中,仅创建一个分区,按回车键采用默认值。 输入p:查看该数据盘的规划分区情况。 输入w:开始分区,并在完成分区后退出。
运行fdisk -lu /dev/vdb 命令查看新分区。 如果出现以下信息,表示新分区已创建完成。 [root@ecshost~ ]# fdisk -lu /dev/vdb Disk /dev/vdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x3e60020e
Device Boot Start End Blocks Id System
/dev/vdb1 2048 41943039 20970496 83 Linux
运行mkfs.ext4 /dev/vdb1 命令在新分区上创建一个文件系统。 本示例中,创建一个ext4文件系统。您也可以根据自己的需要,选择创建其他文件系统。例如:如果您需要在 Linux、Windows和Mac系统之间共享文件,可以运行mkfs.vfat 命令创建VFAT文件系统。 说明: 创建文件系统所需时间取决于数据盘大小。 [root@ecshost~ ]# mkfs.ext4 /dev/vdb1
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1310720 inodes, 5242624 blocks
262131 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2153775104
160 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
运行cp /etc/fstab /etc/fstab.bak 命令备份etc/fstab文件。 运行echo /dev/vdb1 /mnt ext4 defaults 0 0 >> /etc/fstab 命令向/etc/fstab写入新分区信息。 如要把数据盘单独挂载到某个文件夹,例如单独用来存放网页,则将命令中/mnt 替换成所需的挂载点路径。
运行cat /etc/fstab 命令查看/etc/fstab中的新分区信息。 [root@ecshost~ ]# cat /etc/fstab #
# /etc/fstab
# Created by anaconda on Wed Dec 12 07:53:08 2018
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=d67c3b17-255b-4687-be04-f29190d37396 / ext4 defaults 1 1
/dev/vdb1 /mnt ext4 defaults 0 0
运行mount /dev/vdb1 /mnt 命令挂载文件系统。 运行df -h 命令查看目前磁盘空间和使用情况。 如果出现新建文件系统的信息,表示挂载成功,您不需要重启实例即可以使用新的文件系统。 [root@ecshost~ ]# df -h Filesystem Size Used Avail Use% Mounted on
/dev/vda1 40G 1.6G 36G 5% /
devtmpfs 234M 0 234M 0% /dev
tmpfs 244M 0 244M 0% /dev/shm
tmpfs 244M 484K 244M 1% /run
tmpfs 244M 0 244M 0% /sys/fs/cgroup
tmpfs 49M 0 49M 0% /run/user/0
/dev/vdb1 20G 45M 19G 1% /mnt
|