PIC单片机编程器

Welcome to another MidnightDreary Project. However, the credit for this programmer is due to Jens Madsen. This programmer is the probably the most versatile utility that most of you will find if you're in to this sort of thing. Anyway, here are the schematics and some tips that I picked up when I built mine.

Here is a nice list of parts that you will need and their equivalents.

PARTS LIST

PART	CLASSIFICATION	QUANTITY	EQUIVALENT	SCHEMATIC NUMBER
100UF 40V	CAPACITOR	1	NONE	C2
22UF 16V	CAPACITOR	1	NONE	C3
1N4148	DIODE	4	GENERIC SWITCHING DIODE	D3,D4,D5,D7
BC547B	NPN TRANSISTOR	2	2N4401 RADIOSHACK	Q1,Q2
1.5K	RESISTOR	1	NONE	R2
10K	RESISTOR	1	NONE	R1
5.1V	ZENER DIODE	1	NONE	D2
8.2V	ZENER DIODE	1	NONE	D6

  After you have completed the construction of this programmer you will need to find chips to program. The following chips can be programmed with this device.

	PIC 12C5XX, 12C67X, 24CXX, 16C55X, 16C62X, 16C71, 16C71X, 16C8X, 16F8X
	I CURRENTLY HAVE THE SOFTWARE FOR PROGRAMMING 12C50X AVAILABLE FOR DOWNLOAD

Note that this programmer is meant to be run off of your serial port; so if you have the 9 pin serial port convert the outgoing wires as follows:

25 pin serial port to 9 pin serial port

2 to 3

7 to 5

5 to 8

20 to 4

4 to 7

    This should get you going on this programmer. If you want more information on this project, simply click on the hyperlink to get to Dave's page (Dave has nice page about programming chips). Keep in mind this is the work of Jens Madsen and NOT MidnightDreary. Send him a nice e-mail if you want.