Util.js 是对常用函数的封装,方便在实际项目中使用,主要内容包含:数组类、浏览器类、日期类、函数类、数学类、媒体类、节点类、对象类、字符串类、类型检测类、正则表达式类等内容。 数组arrayMax 返回数组中的最大值。 将Math.max()与扩展运算符 (...) 结合使用以获取数组中的最大值。 const arrayMax=arr=> Math.max(...arr); // arrayMax([10, 1, 5]) -> 10 arrayMin 返回数组中的最小值。 将Math.min()与扩展运算符 (...) 结合使用以获取数组中的最小值。 const arrayMin=arr=> Math.min(...arr); // arrayMin([10, 1, 5]) -> 1 chunk 将数组块划分为指定大小的较小数组。 使用Array.from()创建新的数组, 这符合将生成的区块数。使用Array.slice()将新数组的每个元素映射到size长度的区块。如果原始数组不能均匀拆分, 则最终的块将包含剩余的元素。 const chunk=(arr, size)=> Array.from({length: Math.ceil(arr.length / size)}, (v, i)=> arr.slice(i * size, i * size + size)); // chunk([1,2,3,4,5], 2) -> [[1,2],[3,4],[5]] compact 从数组中移除 falsey 值。 使用Array.filter()筛选出 falsey 值 (false、null、0、""、undefined和NaN). const compact=(arr)=> arr.filter(Boolean); // compact([0, 1, false, 2, '', 3, 'a', 'e'*23, NaN, 's', 34]) -> [ 1, 2, 3, 'a', 's', 34 ] countOccurrences 计算数组中值的出现次数。 使用Arrayuce()在每次遇到数组中的特定值时递增计数器。 const countOccurrences=(arr, value)=> arruce((a, v)=> v===value ? a + 1 : a + 0, 0); // countOccurrences([1,1,2,1,2,3], 1) -> 3 deepFlatten 深拼合数组。 使用递归。使用Array.concat()与空数组 ([]) 和跨页运算符 (...) 来拼合数组。递归拼合作为数组的每个元素。 const deepFlatten=arr=> [].concat(...arr.map(v=> Array.isArray(v) ? deepFlatten(v) : v)); // deepFlatten([1,[2],[[3],4],5]) -> [1,2,3,4,5] difference 返回两个数组之间的差异。 从b创建Set, 然后使用Array.filter() on 只保留a b中不包含的值. const difference=(a, b)=> { const s=new Set(b); return a.filter(x=> !s.has(x)); }; // difference([1,2,3], [1,2,4]) -> [3] distinctValuesOfArray 返回数组的所有不同值。 使用 ES6 Set和...rest运算符放弃所有重复的值。 const distinctValuesOfArray=arr=> [...new Set(arr)]; // distinctValuesOfArray([1,2,2,3,4,4,5]) -> [1,2,3,4,5] dropElements 移除数组中的元素, 直到传递的函数返回true。返回数组中的其余元素。 在数组中循环, 使用Array.shift()将数组的第一个元素除去, 直到函数的返回值为true。返回其余元素。 const dropElements=(arr, func)=> { while (arr.length > 0 && !func(arr[0])) arr.shift(); return arr; }; // dropElements([1, 2, 3, 4], n=> n >=3) -> [3,4] everyNth 返回数组中的每个第 n 个元素。 使用Array.filter()创建一个包含给定数组的每个第 n 个元素的新数组。 const everyNth=(arr, nth)=> arr.filter((e, i)=> i % nth===0); // everyNth([1,2,3,4,5,6], 2) -> [ 1, 3, 5 ] filterNonUnique 筛选出数组中的非唯一值。 对于只包含唯一值的数组, 请使用Array.filter()。 const filterNonUnique=arr=> arr.filter(i=> arr.indexOf(i)===arr.lastIndexOf(i)); // filterNonUnique([1,2,2,3,4,4,5]) -> [1,3,5] flatten 拼合数组。 使用Arrayuce()获取数组中的所有元素和concat()以拼合它们。 const flatten=arr=> arruce((a, v)=> a.concat(v), []); // flatten([1,[2],3,4]) -> [1,2,3,4] flattenDepth 将数组向上拼合到指定深度。 使用递归, 递减depth, 每层深度为1。使用Arrayuce()和Array.concat()来合并元素或数组。基本情况下, 对于等于1的depth停止递归。省略第二个元素,depth仅拼合到1的深度 (单个拼合)。 const flattenDepth=(arr, depth=1)=> depth !=1 ? arruce((a, v)=> a.concat(Array.isArray(v) ? flattenDepth(v, depth - 1) : v), []) : arruce((a, v)=> a.concat(v), []); // flattenDepth([1,[2],[[[3],4],5]], 2) -> [1,2,[3],4,5] groupby 根据给定函数对数组元素进行分组。 使用Array.map()将数组的值映射到函数或属性名。使用Arrayuce()创建一个对象, 其中的键是从映射的结果生成的。 const groupBy=(arr, func)=> arr.map(typeof func==='function' ? func : val=> val[func]) uce((acc, val, i)=> { acc[val]=(acc[val] || []).concat(arr[i]); return acc; }, {}); // groupBy([6.1, 4.2, 6.3], Math.floor) -> {4: [4.2], 6: [6.1, 6.3]} // groupBy(['one', 'two', 'three'], 'length') -> {3: ['one', 'two'], 5: ['three']} head 返回列表的头。 使用arr[0]可返回传递的数组的第一个元素。 const head=arr=> arr[0]; // head([1,2,3]) -> 1 initial 返回除最后一个数组之外的所有元素。 使用 "arr.slice(0,-1)" 返回数组的最后一个元素。 const initial=arr=> arr.slice(0, -1); // initial([1,2,3]) -> [1,2] initializeArrayWithRange 初始化包含指定范围内的数字的数组。 使用Array(end-start)创建所需长度的数组Array.map()以填充区域中所需的值。可以省略start以使用默认值0. const initializeArrayWithRange=(end, start=0)=> Array.from({ length: end - start }).map((v, i)=> i + start); // initializeArrayWithRange(5) -> [0,1,2,3,4] initializeArrayWithValues 初始化并填充具有指定值的数组。 使用Array(n)创建所需长度的数组,fill(v)以填充所需的值。可以省略value以使用默认值0. const initializeArrayWithValues=(n, value=0)=> Array(n).fill(value); // initializeArrayWithValues(5, 2) -> [2,2,2,2,2] intersection 返回两个数组中存在的元素的列表。 从b创建Set, 然后使用Array.filter()on a只保留b中包含的值. const intersection=(a, b)=> { const s=new Set(b); return a.filter(x=> s.has(x)); }; // intersection([1,2,3], [4,3,2]) -> [2,3] last 返回数组中的最后一个元素。 使用arr.length - 1可计算给定数组的最后一个元素的索引并返回它。 const last=arr=> arr[arr.length - 1]; // last([1,2,3]) -> 3 mapObject 使用函数将数组的值映射到对象, 其中键值对由原始值作为键和映射值组成。 使用匿名内部函数范围来声明未定义的内存空间, 使用闭包来存储返回值。使用新的Array可将该数组与函数的映射放在其数据集上, 而逗号运算符返回第二个步骤, 而不需要从一个上下文移动到另一个环境 (由于关闭和操作顺序)。 const mapObject=(arr, fn)=> (a=> (a=[arr, arr.map(fn)], a[0]uce( (acc,val,ind)=> (acc[val]=a[1][ind], acc), {}) )) ( ); /* const squareIt=arr=> mapObject(arr, a=> a*a) squareIt([1,2,3]) // { 1: 1, 2: 4, 3: 9 } */ nthElement 返回数组的第 n 个元素。 使用Array.slice()可获取包含第 n 个元素的数组。如果索引超出界限, 则返回[]。省略第二个参数n, 以获取数组的第一个元素。 const nthElement=(arr, n=0)=> (n>0? arr.slice(n,n+1) : arr.slice(n))[0]; // nthElement(['a','b','c'],1) -> 'b' // nthElement(['a','b','b'],-3) -> 'a' pick 从对象中选取对应于给定键的键值对。 使用Arrayuce()将筛选/选取的密钥转换回具有相应键值对的对象 (如果在 obj 中存在该键)。 const pick=(obj, arr)=> arruce((acc, curr)=> (curr in obj && (acc[curr]=obj[curr]), acc), {}); // pick({ 'a': 1, 'b': '2', 'c': 3 }, ['a', 'c']) -> { 'a': 1, 'c': 3 } pull 对原始数组进行变异, 以筛选出指定的值。 使用Array.filter()和Array.includes()来拉出不需要的值。使用Array.length=0可将传入的数组中的长度重置为零, 并将其设置为Array.push(), 以便仅使用所提取的值填充它。 const pull=(arr, ...args)=> { let pulled=arr.filter((v, i)=> !args.includes(v)); arr.length=0; pulled.forEach(v=> arr.push(v)); }; // let myArray=['a', 'b', 'c', 'a', 'b', 'c']; // pull(myArray, 'a', 'c'); // console.log(myArray) -> [ 'b', 'b' ] remove 从数组中移除给定函数返回false的元素. 使用Array.filter()查找返回 truthy 值的数组元素和Arrayuce()以使用Array.splice()删除元素。使用三参数 (func value, index, array调用函数). const remove=(arr, func)=> Array.isArray(arr) ? arr.filter(func)uce((acc, val)=> { arr.splice(arr.indexOf(val), 1); return acc.concat(val); }, []) : []; // remove([1, 2, 3, 4], n=> n % 2==0) -> [2, 4] sample 返回数组中的随机元素。 使用Math.random()生成一个随机数, 将它与length相乘, 并使用数学将其舍入到最接近的整数Math.floor()。此方法也适用于字符串。 const sample=arr=> arr[Math.floor(Math.random() * arr.length)]; // sample([3, 7, 9, 11]) -> 9 shuffle 随机数组值的顺序。 使用Array.sort()可在比较器中使用Math.random()重新排序元素。 const shuffle=arr=> arr.sort(()=> Math.random() - 0.5); // shuffle([1,2,3]) -> [2,3,1] similarity 返回两个数组中都显示的元素的数组。 使用filter()可删除不属于values的值, 使用includes()确定. const similarity=(arr, values)=> arr.filter(v=> values.includes(v)); // similarity([1,2,3], [1,2,4]) -> [1,2] symmetricDifference 返回两个数组之间的对称差。 从每个数组创建一个Set, 然后对它们中的每一个都使用Array.filter(), 以便只保留其他值中不包含的数值。 const symmetricDifference=(a, b)=> { const sA=new Set(a), sB=new Set(b); return [...a.filter(x=> !sB.has(x)), ...b.filter(x=> !sA.has(x))]; } // symmetricDifference([1,2,3], [1,2,4]) -> [3,4] tail 返回数组中的所有元素, 除第一个。 如果数组的length大于1, 则返回arr.slice(1), 否则返回整个数组。 const tail=arr=> arr.length > 1 ? arr.slice(1) : arr; // tail([1,2,3]) -> [2,3] // tail([1]) -> [1] take 返回一个数组, 其中 n 个元素从开始处移除。 使用Array.slice()创建数组的切片, 其中包含从开始处取出的n元素。 const take=(arr, n=1)=> arr.slice(0, n); // take([1, 2, 3], 5) -> [1, 2, 3] // take([1, 2, 3], 0) -> [] takeRight 返回一个数组, 其中 n 个元素从末尾移除。 使用Array.slice()创建数组的切片, 其中包含从末尾取出的n元素。 const takeRight=(arr, n=1)=> arr.slice(arr.length - n, arr.length); // takeRight([1, 2, 3], 2) -> [ 2, 3 ] // takeRight([1, 2, 3]) -> [3] union 返回在两个数组中的任意一个中存在的每个元素。 创建一个Set, 其中包含a和b的所有值, 并将其转换为数组。 const union=(a, b)=> Array.from(new Set([...a, ...b])); // union([1,2,3], [4,3,2]) -> [1,2,3,4] without 筛选出数组中具有指定值之一的元素。 使用Array.filter()创建不包括的数组 (使用!Array.includes()) 所有给定值。 const without=(arr, ...args)=> arr.filter(v=> !args.includes(v)); // without([2, 1, 2, 3], 1, 2) -> [3] zip 创建基于原始数组中的位置分组的元素数组。 使用Math.max.apply()获取参数中最长的数组。创建一个以该长度为返回值的数组, 并使用 map 函数创建一个分组元素的数组Array.from()如果参数数组的长度不同, 则在未找到任何值的情况下使用undefined。 const zip=(...arrays)=> { const maxLength=Math.max(...arrays.map(x=> x.length)); return Array.from({length: maxLength}).map((_, i)=> { return Array.from({length: arrays.length}, (_, k)=> arrays[k][i]); }) } //zip(['a', 'b'], [1, 2], [true, false]); -> [['a', 1, true], ['b', 2, false]] //zip(['a'], [1, 2], [true, false]); -> [['a', 1, true], [undefined, 2, false]] 浏览器bottomVisible 如果页的底部可见, 则返回true, 否则为false。 使用scrollY、scrollHeight和clientHeight来确定页面底部是否可见。 const bottomVisible=()=> document.documentElement.clientHeight + window.scrollY >=document.documentElement.scrollHeight || document.documentElement.clientHeight; // bottomVisible() -> true currentURL 返回当前 URL。 使用window.location.href获取当前 URL。 const currentURL=()=> window.location.href; // currentUrl() -> 'google' elementIsVisibleInViewport 如果指定的元素在视区中可见, 则返回true, 否则为false。 使用 Element.getBoundingClientRect()和window.inner(Width|Height)值以确定给定元素在视区中是否可见。省略第二个参数以确定该元素是否完全可见, 或指定true以确定它是否部分可见。 const elementIsVisibleInViewport=(el, partiallyVisible=false)=> { const { top, left, bottom, right }=el.getBoundingClientRect(); return partiallyVisible ? ((top > 0 && top < innerHeight) || (bottom > 0 && bottom < innerHeight)) && ((left > 0 && left < innerWidth) || (right > 0 && right < innerWidth)) : top >=0 && left >=0 && bottom <=innerHeight && right <=innerWidth; }; // e.g. 100x100 viewport and a 10x10px element at position {top: -1, left: 0, bottom: 9, right: 10} // elementIsVisibleInViewport(el) -> false (not fully visible) // elementIsVisibleInViewport(el, true) -> true (partially visible) getScrollPosition 返回当前页的滚动位置。 如果已定义, 则使用pageXOffset和pageYOffset, 否则scrollLeft和scrollTop。可以省略el以使用window的默认值. const getScrollPosition=(el=window)=> ({x: (el.pageXOffset !==undefined) ? el.pageXOffset : el.scrollLeft, y: (el.pageYOffset !==undefined) ? el.pageYOffset : el.scrollTop}); // getScrollPosition() -> {x: 0, y: 200} getURLParameters 返回一个包含当前 URL 参数的对象。 使用match()与适当的正则表达式来获取所有键值对,Arrayuce()可将它们映射并合并到单个对象中。将location.search作为要应用于当前url的参数传递. const getURLParameters=url=> url.match(/([^?=&]+)(=([^&]*))/g)uce( (a, v)=> (a[v.slice(0, v.indexOf('='))]=v.slice(v.indexOf('=') + 1), a), {} ); // getURLParameters('url/page?name=Adam&surname=Smith') -> {name: 'Adam', surname: 'Smith'} redirect 重定向到指定的 URL。 使用window.location.href或window.location.replace()重定向到url。传递第二个参数以模拟链接单击 (true-默认值) 或 HTTP 重定向 (false). const redirect=(url, asLink=true)=> asLink ? window.location.href=url : window.location.replace(url); // redirect('google') scrollToTop 平滑滚动到页面顶部。 使用 document.documentElement.scrollTop或document.body.scrollTop从顶部获取距离。从顶部的距离的一小部分滚动。使用 window.requestAnimationFrame()对滚动进行动画处理。 const scrollToTop=()=> { const c=document.documentElement.scrollTop || document.body.scrollTop; if (c > 0) { window.requestAnimationFrame(scrollToTop); window.scrollTo(0, c - c / 8); } }; // scrollToTop() 日期getDaysDiffBetweenDates 返回两个日期之间的差异 (以天为值)。 计算Date对象之间的差异 (以天为)。 const getDaysDiffBetweenDates=(dateInitial, dateFinal)=> (dateFinal - dateInitial) / (1000 * 3600 * 24); // getDaysDiffBetweenDates(new Date("2021-12-13"), new Date("2021-12-22")) -> 9 JSONToDate 将 JSON 对象转换为日期。 使用Date(), 将 JSON 格式的日期转换为可读格式 (dd/mm/yyyy日)). const JSONToDate=arr=> { const dt=new Date(parseInt(arr.toString().substr(6))); return `${ dt.getDate() }/${ dt.getMonth() + 1 }/${ dt.getFullYear() }` }; // JSONToDate(/Date(1489525200000)/) -> "14/3/2021" toEnglishDate 将日期从美国格式转换为英文格式。 使用Date.toISOString()、split('T')和replace()将日期从美式格式转换为英文格式。如果传递的时间不能转换为日期, 则抛出错误。 const toEnglishDate=(time)=> {try{return new Date(time).toISOString().split('T')[0].replace(/-/g, '/')}catch(e){return}}; // toEnglishDate('09/21/2010') -> '21/09/2010' 函数类chainAsync 链异步函数。 循环遍历包含异步事件的函数数组, 当每个异步事件完成时调用next。 const chainAsync=fns=> { let curr=0; const next=()=> fns[curr++](next); next(); }; /* chainAsync([ next=> { console.log('0 seconds'); setTimeout(next, 1000); }, next=> { console.log('1 second'); setTimeout(next, 1000); }, next=> { console.log('2 seconds'); } ]) */ compose 执行从右向左的函数组合。 使用Arrayuce()执行从右向左的函数组合。最后一个 (最右边) 的函数可以接受一个或多个参数;其余的函数必须是一元的。 const compose=(...fns)=> fnsuce((f, g)=> (...args)=> f(g(...args))); /* const add5=x=> x + 5 const multiply=(x, y)=> x * y const multiplyAndAdd5=compose(add5, multiply) multiplyAndAdd5(5, 2) -> 15 */ curry Curries a function. 使用递归。如果提供的参数 (变量) 的数量足够, 请调用传递的函数args f。否则, 返回需要其余参数的扩充函数f。如果你想咖喱一个函数, 接受可变数目的参数 (如Math.min()), 可以选择将参数的个数传递到第二个参数arity(可变函数). const curry=(fn, arity=fn.length, ...args)=> arity <=args.length ? fn(...args) : curry.bind(null, fn, arity, ...args); // curry(Math.pow)(2)(10) -> 1024 // curry(Math.min, 3)(10)(50)(2) -> 2 functionName 记录函数的名称。 使用console.debug()和传递的方法的name属性将方法的名称记录到控制台的debug通道中。 const functionName=fn=> (console.debug(fn.name), fn); // functionName(Math.max) -> max (logged in debug channel of console) pipe 执行从左向右的函数组合。 使用Arrayuce()与扩展运算符 (...) 执行从左向右的函数组合。第一个 (最左边的) 函数可以接受一个或多个参数;其余的函数必须是一元的。 const pipeFunctions=(...fns)=> fnsuce((f, g)=> (...args)=> g(f(...args))); /* const add5=x=> x + 5 const multiply=(x, y)=> x * y const multiplyAndAdd5=pipeFunctions(multiply, add5) multiplyAndAdd5(5, 2) -> 15 */ promisify 转换异步函数以返回一个承诺。 使用讨好返回一个返回调用原始函数的Promise的函数。使用...rest运算符传入所有参数。 在节点 8 + 中, 可以使用 utilmisify const promisify=func=> (...args)=> new Promise((resolve, reject)=> func(...args, (err, result)=> err ? reject(err) : resolve(result)) ); // const delay=promisify((d, cb)=> setTimeout(cb, d)) // delay(2000).then(()=> console.log('Hi!')) -> Promise resolves after 2s runPromisesInSeries 运行一系列的承诺系列。 使用Arrayuce()创建一个承诺链, 每个承诺在解决时返回下一个承诺。 const runPromisesInSeries=ps=> psuce((p, next)=> p.then(next), Promise.resolve()); // const delay=(d)=> new Promise(r=> setTimeout(r, d)) // runPromisesInSeries([()=> delay(1000), ()=> delay(2000)]) -> executes each promise sequentially, taking a total of 3 seconds to complete sleep 延迟异步函数的执行。 延迟执行async函数的一部分, 将其放入休眠状态, 返回Promise. const sleep=ms=> new Promise(resolve=> setTimeout(resolve, ms)); /* async function sleepyWork() { console.log('I\'m going to sleep for 1 second.'); await sleep(1000); console.log('I woke up after 1 second.'); } */ 数学arrayAverage 返回数字数组的平均值。 使用Arrayuce()将每个值添加到累加器中, 并以0的值初始化, 除以数组的length。 const arrayAverage=arr=> arruce((acc, val)=> acc + val, 0) / arr.length; // arrayAverage([1,2,3]) -> 2 arraySum 返回一个数字数组的总和。 使用Arrayuce()将每个值添加到累加器中, 并以0值初始化. const arraySum=arr=> arruce((acc, val)=> acc + val, 0); // arraySum([1,2,3,4]) -> 10 collatz 应用 Collatz 算法。 如果n是偶数, 则返回n/2。否则返回3n+1. const collatz=n=> (n % 2==0) ? (n / 2) : (3 * n + 1); // collatz(8) --> 4 // collatz(5) --> 16 collatz 将数字转换为数字数组。 将数字转换为字符串, 在 ES6 ([...string]) 中使用扩展运算符生成数组。使用Array.map()和parseInt()将每个值转换为整数。 const digitize=n=> [...''+n].map(i=> parseInt(i)); // digitize(2334) -> [2, 3, 3, 4] digitize 返回两点之间的距离。 使用Math.hypot()计算两个点之间的欧氏距离。 const distance=(x0, y0, x1, y1)=> Math.hypot(x1 - x0, y1 - y0); // distance(1,1, 2,3) -> 2.23606797749979 distance 计算数字的阶乘。 使用递归。如果n小于或等于1, 则返回1。否则, 返回n的乘积和n - 1的阶乘。如果n为负数, 则引发异常。 const factorial=n=> n < 0 ? (()=> { throw new TypeError('Negative numbers are not allowed!') })() : n <=1 ? 1 : n * factorial(n - 1); // factorial(6) -> 720 fibonacci 生成一个数组, 包含斐波那契数列, 直到第 n 个项。 创建一个指定长度的空数组, 初始化前两个值 (0和1)。使用Arrayuce()可将值添加到数组中, 方法是使用前两个值的总和, 但前两个数值除外。 const fibonacci=n=> Array(n).fill(0)uce((acc, val, i)=> acc.concat(i > 1 ? acc[i - 1] + acc[i - 2] : i), []); // fibonacci(5) -> [0,1,1,2,3] gcd 计算两个数字之间最大的公共除数。 使用递归。基本情况是当y等于0时。在这种情况下, 返回x。否则, 返回y的 GCD 和除法的其余部分x/y. const gcd=(x, y)=> !y ? x : gcd(y, x % y); // gcd (8, 36) -> 4 hammingDistance 计算两个值之间的汉明距离。 使用 XOR 运算符 (^) 可查找两个数字之间的位差, 使用toString(2)转换为二进制字符串。使用match(/1/g)计算并返回字符串中1的数目。. const hammingDistance=(num1, num2)=> ((num1 ^ num2).toString(2).match(/1/g) || '').length; // hammingDistance(2,3) -> 1 isDivisible 检查第一个数值参数是否可被另一个数字变量整除。 使用模数运算符 (%) 检查余数是否等于0. const isDivisible=(dividend, divisor)=> dividend % divisor===0; // isDivisible(6,3) -> true iseven 如果给定的数字为偶数, 则返回true, 否则为false。 检查一个数字是奇数还是使用模数 (%) 运算符。如果数字为偶数, 则返回true, 如果数字为奇数, 则为false。 const isEven=num=> num % 2===0; // isEven(3) -> false lcm 返回两个数字中最不常见的倍数。 使用最大的公共除数 (GCD) 公式和Math.abs()来确定最不常见的倍数。GCD 公式使用递归。 const lcm=(x,y)=> { const gcd=(x, y)=> !y ? x : gcd(y, x % y); return Math.abs(x*y)/(gcd(x,y)); }; // lcm(12,7) -> 84 median 返回数字数组的中间值。 找到数组的中间, 使用Array.sort()来对值进行排序。如果length为奇数, 则返回中点的数字, 否则为两个中间数的平均值。 const median=arr=> { const mid=Math.floor(arr.length / 2), nums=arr.sort((a, b)=> a - b); return arr.length % 2 !==0 ? nums[mid] : (nums[mid - 1] + nums[mid]) / 2; }; // median([5,6,50,1,-5]) -> 5 // median([0,10,-2,7]) -> 3.5 palindrome 如果给定字符串为回文, 则返回true, 否则为false。 转换字符串toLowerCase()并使用replace()从其中删除非字母数字字符。然后,split('')到各个字符,reverse(),join(''), 并将其与原始的、不可逆转的字符串进行比较, 然后将其转换为tolowerCase(). const palindrome=str=> { const s=str.toLowerCase().replace(/[\W_]/g,''); return s===s.split('').reverse().join(''); } // palindrome('taco cat') -> true percentile 使用百分比公式计算给定数组中有多少个数小于或等于给定值。 使用Arrayuce()计算值的下面有多少, 有多少个数是相同的值, 并应用百分比公式。 const percentile=(arr, val)=> 100 * arruce((acc,v)=> acc + (v < val ? 1 : 0) + (v===val ? 0.5 : 0), 0) / arr.length; // percentile([1,2,3,4,5,6,7,8,9,10], 6) -> 55 powerset 返回给定数组的真子集。 使用Arrayuce()与Array.map()组合, 以循环访问元素并将其合并到包含所有组合的数组中。 const powerset=arr=> arruce((a, v)=> a.concat(a.map(r=> [v].concat(r))), [[]]); // powerset([1,2]) -> [[], [1], [2], [2,1]] randomIntegerInRange 返回指定范围内的随机整数。 使用Math.random()生成一个随机数并将其映射到所需的范围, 使用Math.floor()使其成为整数。 const randomIntegerInRange=(min, max)=> Math.floor(Math.random() * (max - min + 1)) + min; // randomIntegerInRange(0, 5) -> 2 randomNumberInRange 返回指定范围内的随机数。 使用Math.random()生成随机值, 并使用乘法将其映射到所需的范围。 const randomNumberInRange=(min, max)=> Math.random() * (max - min) + min; // randomNumberInRange(2,10) -> 6.0211363285087005 round 将数字四舍五入到指定的位数。 使用Math.round()和模板文本将数字舍入到指定的位数。省略第二个参数,decimals舍入为整数。 const round=(n, decimals=0)=> Number(`${Math.round(`${n}e${decimals}`)}e-${decimals}`); // round(1.005, 2) -> 1.01 standardDeviation 返回数字数组的标准偏差。 使用Arrayuce()计算值的平均值、方差和方差的总和, 值的方差, 然后确定标准偏差。可以省略第二个参数以获取样本标准偏差, 或将其设置为true以获取总体标准偏差。 const standardDeviation=(arr, usePopulation=false)=> { const mean=arruce((acc, val)=> acc + val, 0) / arr.length; return Math.sqrt( arruce((acc, val)=> acc.concat(Math.pow(val - mean, 2)), []) uce((acc, val)=> acc + val, 0) / (arr.length - (usePopulation ? 0 : 1)) ); }; // standardDeviation([10,2,38,23,38,23,21]) -> 13.284434142114991 (sample) // standardDeviation([10,2,38,23,38,23,21], true) -> 12.29899614287479 (population) 媒体speechSynthesis 执行语音合成 (实验)。 使用 SpeechSynthesisUtterance.voice和 window.speechSynthesis.getVoices()将邮件转换为语音。使用 window.speechSynthesis.speak()播放该消息。了解有关Web 语音 API 的 SpeechSynthesisUtterance 接口的详细信息. const speechSynthesis=message=> { const msg=new SpeechSynthesisUtterance(message); msg.voice=window.speechSynthesis.getVoices()[0]; window.speechSynthesis.speak(msg); }; // speechSynthesis('Hello, World') -> plays the message 节点JSONToFile 将 JSON 对象写入文件。 使用fs.writeFile()、模板文本和JSON.stringify()将json对象写入.json文件。 const fs=require('fs'); const JSONToFile=(obj, filename)=> fs.writeFile(`${filename}.json`, JSON.stringify(obj, null, 2)) // JSONToFile({test: "is passed"}, 'testJsonFile') -> writes the object to 'testJsonFile.json' readFileLines 返回指定文件中的行的数组。 在fs节点包中使用readFileSync函数可以从文件创建Buffer。使用toString(encoding)函数将缓冲区转换为字符串。通过spliting 文件内容行从文件内容创建数组 (每个 ). const fs=require('fs'); const readFileLines=filename=> fs.readFileSync(filename).toString('UTF8').split(' '); /* contents of test.txt : line1 line2 line3 ___________________________ let arr=readFileLines('test.txt') console.log(arr) // -> ['line1', 'line2', 'line3'] */ 对象cleanObj 移除从 JSON 对象指定的属性之外的任何特性。 使用Object.keys()方法可以遍历给定的 json 对象并删除在给定数组中不是included 的键。另外, 如果给它一个特殊的键 (childIndicator), 它将在里面深入搜索, 并将函数应用于内部对象。 const cleanObj=(obj, keysToKeep=[], childIndicator)=> { Object.keys(obj).forEach(key=> { if (key===childIndicator) { cleanObj(obj[key], keysToKeep, childIndicator); } else if (!keysToKeep.includes(key)) { delete obj[key]; } }) } /* const testObj={a: 1, b: 2, children: {a: 1, b: 2}} cleanObj(testObj, ["a"],"children") console.log(testObj)// { a: 1, children : { a: 1}} */ objectFromPairs 从给定的键值对创建对象。 使用Arrayuce()创建和组合键值对。 const objectFromPairs=arr=> arruce((a, v)=> (a[v[0]]=v[1], a), {}); // objectFromPairs([['a',1],['b',2]]) -> {a: 1, b: 2} objectToPairs 从对象创建键值对数组的数组。 使用Object.keys()和Array.map()循环访问对象的键并生成具有键值对的数组。 const objectToPairs=obj=> Object.keys(obj).map(k=> [k, obj[k]]); // objectToPairs({a: 1, b: 2}) -> [['a',1],['b',2]]) shallowClone 创建对象的浅表克隆。 使用Object.assign()和一个空对象 ({}) 创建原始的浅克隆。 const shallowClone=obj=> Object.assign({}, obj); /* const a={ x: true, y: 1 }; const b=shallowClone(a); a===b -> false */ truthCheckCollection 检查谓词 (第二个参数) 是否 truthy 集合的所有元素 (第一个参数)。 使用Array.every()检查每个传递的对象是否具有指定的属性, 以及是否返回 truthy 值。 truthCheckCollection=(collection, pre)=> (collection.every(obj=> obj[pre])); // truthCheckCollection([{"user": "Tinky-Winky", "sex": "male"}, {"user": "Dipsy", "sex": "male"}], "sex") -> true 字符串anagrams 生成字符串的所有字谜 (包含重复项)。 使用递归。对于给定字符串中的每个字母, 为其其余字母创建所有部分字谜。使用Array.map()将字母与每个部分变位词组合在一起, 然后将Arrayuce()组合在一个数组中的所有字谜。基本情况为字符串length等于2或1. const anagrams=str=> { if (str.length <=2) return str.length===2 ? [str, str[1] + str[0]] : [str]; return str.split('')uce((acc, letter, i)=> acc.concat(anagrams(str.slice(0, i) + str.slice(i + 1)).map(val=> letter + val)), []); }; // anagrams('abc') -> ['abc','acb','bac','bca','cab','cba'] Capitalize 将字符串的第一个字母大写。 使用 destructuring 和toUpperCase()可将第一个字母、...rest用于获取第一个字母之后的字符数组, 然后是Array.join('')以使其成为字符串。省略lowerRest参数以保持字符串的其余部分不变, 或将其设置为true以转换为小写。 const capitalize=([first,...rest], lowerRest=false)=> first.toUpperCase() + (lowerRest ? rest.join('').toLowerCase() : rest.join('')); // capitalize('myName') -> 'MyName' // capitalize('myName', true) -> 'Myname' capitalizeEveryWord 将字符串中每个单词的首字母大写。 使用replace()匹配每个单词和toUpperCase()的第一个字符以将其大写。 const capitalizeEveryWord=str=> str.replace(/\b[a-z]/g, char=> char.toUpperCase()); // capitalizeEveryWord('hello world!') -> 'Hello World!' escapeRegExp 转义要在正则表达式中使用的字符串。 使用replace()可转义特殊字符。 const escapeRegExp=str=> str.replace(/[.*+?^${}()|[\]\\]/g, '\\$&'); // escapeRegExp('(test)') -> \\(test\\) fromCamelCase 从匹配转换字符串。 使用replace()可删除下划线、连字符和空格, 并将单词转换为匹配。省略第二个参数以使用默认分隔符_. const fromCamelCase=(str, separator='_')=> str.replace(/([a-z\d])([A-Z])/g, '$1' + separator + '$2') .replace(/([A-Z]+)([A-Z][a-z\d]+)/g, '$1' + separator + '$2').toLowerCase(); // fromCamelCase('someDatabaseFieldName', ' ') -> 'some database field name' // fromCamelCase('someLabelThatNeedsToBeCamelized', '-') -> 'some-label-that-needs-to-be-camelized' // fromCamelCase('someJavascriptProperty', '_') -> 'some_javascript_property' reverseString 反转字符串。 使用数组 destructuring 和Array.reverse()可反转字符串中字符的顺序。使用join('')组合字符以获取字符串. const reverseString=str=> [...str].reverse().join(''); // reverseString('foobar') -> 'raboof' sortCharactersInString 按字母顺序对字符串中的字符进行排序。 使用split('')、Array.sort()利用localeCompare()重新组合使用join(''). const sortCharactersInString=str=> str.split('').sort((a, b)=> a.localeCompare(b)).join(''); // sortCharactersInString('cabbage') -> 'aabbceg' toCamelCase 将字符串转换为匹配。 使用replace()可删除下划线、连字符和空格, 并将单词转换为匹配。 const toCamelCase=str=> str.replace(/^([A-Z])|[\s-_]+(\w)/g, (match, p1, p2, offset)=> p2 ? p2.toUpperCase() : p1.toLowerCase()); // toCamelCase("some_database_field_name") -> 'someDatabaseFieldName' // toCamelCase("Some label that needs to be camelized") -> 'someLabelThatNeedsToBeCamelized' // toCamelCase("some-javascript-property") -> 'someJavascriptProperty' // toCamelCase("some-mixed_string with spaces_underscores-and-hyphens") -> 'someMixedStringWithSpacesUnderscoresAndHyphens' truncateString 将字符串截断为指定长度。 确定字符串的length是否大于num。将截断的字符串返回到所需的长度, 并将...追加到末尾或原始字符串。 const truncateString=(str, num)=> str.length > num ? str.slice(0, num > 3 ? num - 3 : num) + '...' : str; // truncateString('boomerang', 7) -> 'boom...' 实用coalesce 返回第一个非空/未定义参数。 使用Array.find()返回第一个非null/undefined的参数。 const coalesce=(...args)=> args.find(_=> ![undefined, null].includes(_)) // coalesce(null,undefined,"",NaN, "Waldo") -> "" coalesceFactory 返回自定义的联合函数, 返回从提供的参数验证函数返回true的第一个参数。 使用Array.find()返回从提供的参数验证函数返回true的第一个参数。 const coalesceFactory=valid=> (...args)=> args.find(valid); // const customCoalesce=coalesceFactory(_=> ![null, undefined, "", NaN].includes(_)) // customCoalesce(undefined, null, NaN, "", "Waldo") //-> "Waldo" extendHex 将3位色码扩展为6位色码。 使用Array.map()、split()和Array.join()来加入映射数组, 将3位的 RGB notated 十六进制 color-code 转换为6位数字形式。Array.slice()用于从字符串启动中删除#, 因为它添加了一次。 const extendHex=shortHex=> '#' + shortHex.slice(shortHex.startsWith('#') ? 1 : 0).split('').map(x=> x+x).join('') // extendHex('#03f') -> '#0033ff' // extendHex('05a') -> '#0055aa' gettype 返回值的本机类型。 如果值未定义或为 null, 则返回小写的构造函数名称、"未定义" 或 "null" const getType=v=> v===undefined ? 'undefined' : v===null ? 'null' : v.constructor.name.toLowerCase(); // getType(new Set([1,2,3])) -> "set" hexToRGB 将 colorcode 转换为rgb()字符串。 使用按位右运算符和掩码位与&(and) 运算符将十六进制颜色代码 (前缀为#) 转换为具有 RGB 值的字符串。如果它是一个3位数的 colorcode, 那么用 extendHex () 函数 (ref.extendHex代码段) 扩展的6位 colorcode 进行相同的处理 const hexToRgb=hex=> { const extendHex=shortHex=> '#' + shortHex.slice(shortHex.startsWith('#') ? 1 : 0).split('').map(x=> x+x).join(''); const extendedHex=hex.slice(hex.startsWith('#') ? 1 : 0).length===3 ? extendHex(hex) : hex; return `rgb(${parseInt(extendedHex.slice(1), 16) >> 16}, ${(parseInt(extendedHex.slice(1), 16) & 0x00ff00) >> 8}, ${parseInt(extendedHex.slice(1), 16) & 0x0000ff})`; } // hexToRgb('#27ae60') -> 'rgb(39, 174, 96)' // hexToRgb('#acd') -> 'rgb(170, 204, 221)' isArray 检查给定参数是否为数组。 使用Array.isArray()检查某个值是否属于数组。 const isArray=val=> !!val && Array.isArray(val); // isArray(null) -> false // isArray([1]) -> true isBoolean 检查给定的参数是否为本机布尔元素。 使用typeof检查某个值是否被归类为布尔基元。 const isBoolean=val=> typeof val==='boolean'; // isBoolean(null) -> false // isBoolean(false) -> true isFunction 检查给定参数是否为函数。 使用typeof检查某个值是否被归类为函数基元。 const isFunction=val=> val && typeof val==='function'; // isFunction('x') -> false // isFunction(x=> x) -> true isNumber 检查给定参数是否为数字。 使用typeof检查某个值是否归类为数字基元。 const isNumber=val=> typeof val==='number'; // isNumber('1') -> false // isNumber(1) -> true isString 检查给定参数是否为字符串。 使用typeof检查某个值是否属于字符串基元。 const isString=val=> typeof val==='string'; // isString(10) -> false // isString('10') -> true isSymbol 检查给定参数是否为符号。 使用typeof检查某个值是否被归类为符号基元。 const isSymbol=val=> typeof val==='symbol'; // isSymbol('x') -> false // isSymbol(Symbol('x')) -> true RGBToHex 将 RGB 组件的值转换为 colorcode。 使用按位左移位运算符 (<<) 和toString(16)将给定的 RGB 参数转换为十六进制字符串, 然后padStart(6,'0')以获取6位十六进制值。 const RGBToHex=(r, g, b)=> ((r << 16) + (g << 8) + b).toString(16).padStart(6, '0'); // RGBToHex(255, 165, 1) -> 'ffa501' timeTaken 测量执行函数所用的时间。 使用console.time()和console.timeEnd()来测量开始和结束时间之间的差异, 以确定回调执行所用的时间。 const timeTaken=callback=> { console.time('timeTaken'); const r=callback(); console.timeEnd('timeTaken'); return r; }; // timeTaken(()=> Math.pow(2, 10)) -> 1024 // (logged): timeTaken: 0.02099609375ms toOrdinalSuffix 将序号后缀添加到数字。 使用模数运算符 (%) 查找单个和十位数字的值。查找匹配的序号模式数字。如果在青少年模式中发现数字, 请使用青少年序号。 const toOrdinalSuffix=num=> { const int=parseInt(num), digits=[(int % 10), (int % 100)], ordinals=['st', 'nd', 'rd', 'th'], oPattern=[1, 2, 3, 4], tPattern=[11, 12, 13, 14, 15, 16, 17, 18, 19]; return oPattern.includes(digits[0]) && !tPattern.includes(digits[1]) ? int + ordinals[digits[0] - 1] : int + ordinals[3]; }; // toOrdinalSuffix("123") -> "123rd" UUIDGenerator 生成 UUID。 使用cryptoAPI 生成 UUID, 符合RFC4122版本4。 const UUIDGenerator=()=> ([1e7] + -1e3 + -4e3 + -8e3 + -1e11).replace(/[018]/g, c=> (c ^ crypto.getRandomValues(new Uint8Array(1))[0] & 15 >> c / 4).toString(16) ); // UUIDGenerator() -> '7982fcfe-5721-4632-bede-6000885be57d' validateEmail 如果给定的字符串是有效的电子邮件, 则返回true, 否则为false。 使用正则表达式检查电子邮件是否有效。如果电子邮件有效, 则返回 true, 如果没有, 则返回false。 const validateEmail=str=> /^(([^<>()\[\]\\.,;:\s@"]+(\.[^<>()\[\]\\.,;:\s@"]+)*)|(".+"))@((\[[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\])|(([a-zA-Z\-0-9]+\.)+[a-zA-Z]{2,}))$/.test(str); // validateEmail(mymail@gmail) -> true validateNumber 如果给定值为数字, 则返回true, 否则为false。 将!isNaN与parseFloat()结合使用, 以检查参数是否为数字。使用isFinite()检查数字是否是有限的。使用Number()检查强制是否保持。 const validateNumber=n=> !isNaN(parseFloat(n)) && isFinite(n) && Number(n)==n; // validateNumber('10') -> true |
|
来自: 新用户8719ag3P > 《待分类》