摘 要:GPS全球定位系统在实际生活中被广泛应用,是当今信息时代发展中的重要组成部分。因其具有性能好、精度高、应用广的特点,使其成为了迄今最好的导航定位系统。本文以北京精仪达盛科技有限公司提供的GSU-38A0 GPS接收模块为例,介绍了GPS的通信协议。讨论了基于单片机的GPS接收系统设计, 提出了对GPS全球定位系统定位信息的接收以及对各定位参数数据的提取方法,并给出了系统的硬件电路及软件流程图。通过本设计方法,本系统由单片机控制GPS模块较为精确地计算和显示日期、时间、经度、纬度等卫星信息。 关键词 GPS;GSU-38A0;单片机;MGLS-12864 Abstract:The Global Positioning System is an very importeant part in the information time, which is widely implied in our pratical life. It's the characteristic of perfect performance, high precision and widely impliment that makes it the best navigation positioning system till now. This article has introduced the GPS correspondence agreement taking the GSU-38A0 GPS sending and receiving moule that provided by the Beijing Techshine Science and Technology Limited Company as an example. And discussed the system design on the base of single chip computer, proposed the method of the GPS system's imformation's receiving and withdrawing of the position parameter data. The article has provided the hardware circtuit and software struct. The system that the single chip computer cotrolling the GPS module can precisely calculate and show the satellite information of date, time, longitude, latitude and so on. Key words:GPS; GSU-38A0; Microcontroller; MGLS-12864 1引言 1引言 2 GSU-38A0 GPS模块简介 3硬件设计 4软件设计 5调试与结果 6结束语 参考文献: [1]邱致和,王万义. GPS原理与应用[M].北京:电子工业出版社,2001:3~8. [2]电子电气综合实训系统使用说明书 [M].北京:精仪达盛科技有限公司,2000:37~47. [3]胡健.单片机原理及接口技术[M].北京:机械工业出版社,2005:164~191. [4]戴佳,戴卫恒.51单片机C语言应用程序设计[M].北京:电子工业出版社2006:236~246. 作者点评: 本文中我们介绍了基于单片机开发的GPS接收机系统设计的方法。 GPS应用越来越广泛,我们的设计只是应用的基础和开端。在实际应用中我们要结合各个领域的特殊情况和特定的技术需求,进行有针对性的处理和设计。 GPS提供的定位信息包括了经度、纬度、海拔、速度、航向、磁场、时间、卫星个数及其编号等卫星信息,其接收数据方法类似,故本设计只是提取了其中的部分价值性较高的数据信息。 GPS可通过NMEA输入命令对串行通讯参数进行设置,实现个性化显示格式,本设计只使用了其默认的设置参数。 |
|