从网上可以找到一些ARM toolchain，但是由于Android系统使用的不是glibc而是Bionic libc。因此只能使用静态编译程序。
其实Android的NDK自带了toolchain，但是不能直接使用NDK目录内的toolchain，否则会出现找不到crtbegin_dynamic.o文件。
即使用-L指定目录或者直接放到gcc命令行也还是提示该文件找不到。（参考最后附上的链接）。
其实Android NDK提供了脚本来剥离出单独的toolchain，脚本的名字叫make-standalone-toolchain.sh
1. 下载Android NDK
http://developer./sdk/ndk/index.html
我用的是android-ndk-r6b
2. 提取toolchain
可以参考文档docs/STANDALONE-TOOLCHAIN.html
在linux系统中解压NDK，假设解压到/opt;
cd /opt/android-ndk-r6b/
build/tools/make-standalone-toolchain.sh --platform=android-8
expr: warning: unportable BRE: `^\\([^\\-].*\\)$': using `^' as the first character
of the basic regular expression is not portable; it is being ignored
expr: warning: unportable BRE: `^\\(--[^=]*\\)=.*$': using `^' as the first character
of the basic regular expression is not portable; it is being ignored
expr: warning: unportable BRE: `^--[^=]*=\\(.*\\)$': using `^' as the first character
of the basic regular expression is not portable; it is being ignored
Auto-config: --toolchain=arm-linux-androideabi-4.4.3
Copying prebuilt binaries...
Copying sysroot headers and libraries...
Copying libstdc++ headers and libraries...
expr: warning: unportable BRE: `^\\([^\\-].*\\)$': using `^' as the first character
of the basic regular expression is not portable; it is being ignored
expr: warning: unportable BRE: `^\\(--[^=]*\\)=.*$': using `^' as the first character
of the basic regular expression is not portable; it is being ignored
expr: warning: unportable BRE: `^\\(--.*\\)$': using `^' as the first character
of the basic regular expression is not portable; it is being ignored
expr: warning: unportable BRE: `^\\([^\\-].*\\)$': using `^' as the first character
of the basic regular expression is not portable; it is being ignored
expr: warning: unportable BRE: `^\\([^\\-].*\\)$': using `^' as the first character
of the basic regular expression is not portable; it is being ignored
expr: warning: unportable BRE: `^\\([^\\-].*\\)$': using `^' as the first character
of the basic regular expression is not portable; it is being ignored
expr: warning: unportable BRE: `^\\(--[^=]*\\)=.*$': using `^' as the first character
of the basic regular expression is not portable; it is being ignored
expr: warning: unportable BRE: `^--[^=]*=\\(.*\\)$': using `^' as the first character
of the basic regular expression is not portable; it is being ignored
Creating package file: /tmp/ndk-hansel/arm-linux-androideabi-4.4.3.tar.bz2
Cleaning up...
Done.
有一些警告没有关系，最终得到的是一个压缩包 /tmp/ndk-hansel/arm-linux-androideabi-4.4.3.tar.bz2
注意：这个是我的Linux机器上的目录。
3. 解压单独的toolchain
可以解压到任意目录，这里假设为/opt/
4.写个hello world 程序试试
hello.c
#include <stdlib.h>
#include <stdio.h>
int main(int argc, char* argv[])
{
printf("Hello Andriod.\n");
return 0;
}
Makefile
export PATH:=/opt/Android/arm-linux-androideabi-4.4.3/bin:${PATH}
CROSS_COMPILE=arm-linux-androideabi-
CC=$(CROSS_COMPILE)gcc
LD=$(CROSS_COMPILE)ld
PROG=hello
OBJS=hello.o
$(PROG):$(OBJS)
$(CC) $(LDFLAGS) -o $@ $(OBJS)
%.o:%.c
$(CC) -c $(CFLAGS) $< -o $@
clean:
rm -rf *.o $(PROG)
编译：
make
可以得到hello可执行文件。
$ file hello
hello: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), not stripped
可见是动态链接的。
上传到手机里执行。如果用数据线连接了手机，而且安装了Android SDK，可以使用adb命令。
adb push hello /system/sbin/hello
adb shell chmod 777 /system/sbin/hello
adb shell /system/sbin/hello
如果没有SDK，可以在手机里安装一个QuickSSHd程序，通过WiFi用Putty之类的软件连接到手机终端。通过SFTP来传送文件。
# ./hello
Hello Andriod.
注意： 手机需要有root权限
参考：http://groups.google.com/group/android-ndk/browse_thread/thread/7506768ccf52cea2?pli=1
http://www./Linux/2011-10/45968.htm
