先说一下,初始化方法 + scheduledTimerWithTimeInterval:invocation:repeats: 这两个是创建一个定时器,并加入到当前运行循环中,即我们可以这样去理解,这样初始化一个定时器时,在(NSTimeInterval)seconds 时间之后,自动启动定时器。
而以下两个初始化方法这不一样: + timerWithTimeInterval:invocation:repeats:
这两个同样是创建,但没有加入到,运行循环中。class method to create the timer object without scheduling it on a run loop.然后,建立之后,必须(after creating it, you must add the timer to a run loop manually by calling the addTimer:forMode: method of the corresponding NSRunLoop object.),这就是与上面两个方法的区别。 //创建一个定时器
_timer=[NSTimer timerWithTimeInterval:10 target:self selector:@selector(changeTimeAtTimedisplay) userInfo:nil repeats:YES];
以上两端代码效果是一样的
关于这个方法: Firing a Timer
其实他并不是真的启动一个定时器,从之前的初始化方法中我们也可以看到,建立的时候,在适当的时间,定时器就会自动启动。那这个方法是干什么的呢。 You can use this method to fire a repeating timer without interrupting its regular firing schedule. If the timer is non-repeating, it is automatically invalidated after firing, even if its scheduled fire date has not arrived. 这是官方文档的说法,英文说的很清楚,但我们理解还不是很到位,为了彻底搞懂它的功能。我又做了一个测试。
也是很简单,把上面那个定时器,改变一点 //初始化的时候创建一个定时器 - (id) initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil{ //手动加入到循环中 NSRunLoop *runloop=[NSRunLoop currentRunLoop]; [runloop addTimer:_timer forMode:NSDefaultRunLoopMode]; //当然这个定时器会自动启动,只不多过了十秒之后,才触发 } return self }
当我们单击“开始”按钮时,
- (IBAction)startTime:(id)sender { } 结果是,单击一下按钮,倒计时减1,单击一下减1,即它把触发的时间给提前了,但过十秒后倒计时还会减1,即它只是提前触发定时器,而不影响之前的那个定时器设置的时间,就好比我们等不及要去看一场球赛,赶紧把车开快些一样,fire的功能就像让我们快些到球场,但却不影响球赛开始的时间。 还记得之前那个初始化定时器时,设置的是YES吗,当我们,改为NO时,即不让它循环触发时,我们此时再单击开始按钮。会猛然发现,倒计时减1了,但当我们再点击开始按钮时,会发现倒计时,不会动了。原因是:我们的定时器,被设置成只触发一次,再fire的时候,触发一次,该定时器,就被自动销毁了,以后再fire也不会触发了。
现在 我们再看官方的解释,或许就会更明白了,
You can use this method to fire a repeating timer without interrupting its regular firing schedule. If the timer is non-repeating, it is automatically invalidated after firing, even if its scheduled fire date has not arrived. 这就对了,fire并不是启动一个定时器,只是提前触发而已。
|
|