五、 单机组成： V、 Component of unit A、 Φ135PP单螺杆挤出机： Φ135PP Single screw extruder ● 机筒螺杆材质采用38CrMoAla氮化钢。高抛光，高硬度，耐磨性螺杆 Material of barrel screw is 38CrMoAla nitriding steel. High polished, high hardness and wear resistance screw. ● 机筒螺杆长径比为36:1 Diameter of barrel screw is 36:1. ● 减速机：国茂ZLYJ375-12.5-V橡塑专用挤出机 Reducer: Guomao ZLYJ375-12.5-V rubber special extruder ● 驱动马达：江门江晟165Kw-6P交流电机 Driving motor: Jiangmen Jiangsheng 165Kw-6P exchanging motor ● 调速形式：欧瑞165Kw变频器调速 Speed control: EURA 165kw frequency converter ● 机筒加热方式：6区不锈加热器一套，6×12Kw=72Kw Barrel heating: stainless heater with 6areas, 6×12Kw=72Kw ● 机筒冷却方式：强风制冷，冷却风机6×250W=1500w Cooling of barrel: strong wind cooling, cooling fan is 6*250w=1500w ● 减速机与马达链接方式：弹性直连方式连接 Reducer connects with motor: elastic directly ● 机架组成：国标方管组合。 Machine frame: international square tube ● 控温形式：6区富士温控表PID温控 Temperature control: 6areas withFujitemperature-controlled meter PID B、 Φ150板式双工位液压快速换网器： B、 Φ150 plate style double stations hydraulic quickly change net ● 换网形式：液压快速换网。 Changing net: hydraulic quickly change ● 换网口径：φ150 Diameter of net-changing: φ150 ● 加热形式：不锈加热棒加热 Heating: stainless heating rod ● 加热功率：5Kw Heating power: 5kw ● 液压系统压力：18Mpa Pressure of hydraulic system: 18Mpa ● 换网器品牌：头陀精诚 Net changing brand: little Jingcheng ● 压力传感器：上海朝辉 Pressure sensor:ShanghaiZhaohui ● 控温形式：1区富士温控表PID温控 Temperature control: 1area PID control the temperature withFujimeter C、 静态混炼器 C、 Static mixer ● 引进瑞士技术，自主研发。 Bring in technology fromSwitzerlandand research&develop independently. ● 确使塑化更均匀，减少流线纹以及均匀混炼熔体 Make it plasticizing more even, reduce the flow lines and evenly mixed melt. D、 衣架式片材模头： D、 Coat-hanger die ● 衣架式片材模头：头陀精诚 Coat-hanger die: little Jingcheng ● 模头材质：40CrMo合金模具钢 Material of die: 40CrMo alloy steel ● 模具有效宽度：750mm（两端板可调节） Valid width of die: 750mm (both sides of plate can be adjusted) ● 调节形式：拉码式 Adjust: T-shape ● 加热方式：不锈加热棒5区加热 Heating: stainless rod with 5areas ● 吊装形式：拉杆可调吊装 Heating form: adjustable lever lifting ● 控温形式：5区富士温控表PID温控 Temperature control: 5areas PID control temperature withFujimeter E、 三辊压延机： E、 Three rollers calender ● 压延辊传动方式：3Kw×3台国茂减速马达直连独立传动 Calender driving mode: 3kw*3pcs Guomao reducer motor direct driving independently. ● 压辊规格：φ350×800 Size of roller: φ350×800 ● 定辊规格：φ550×800 Size of finalized roller: φ550×800 Size of cooling roller: φ550×800 ● 线速度：7～25m/min Linear speed: 7～25m/min ● 压合方式：涡轮压合 Pressing method: turbine calender ● 压合力：10吨 Press: 10tons ● 辊筒轴承：日本NTN22212C Bearings: NTN22212C/Japan ● 调速形式：欧瑞2.2kW变频调速 Speed control: EURA2.2KW frequency converter ● 旋转接头：东莞2寸旋转接头×3个 Rotating joint: Dongguan 3*2inch ● 升降减速机：Rv75-0.55Kw×1台 Lift reducer: Rv75-0.55Kw 1pcs ● 进退减速机：RV75-40-600-0.55Kw×1台 Reducer of rollers movement: RV75-40-600-0.55Kw 1pcs ● 进料方式：立式三辊上进片 Feeding: vertical three roller feeding sheet ● 壁板机架：国标厚壁高碳素钢与国标型材组合 Wall plate frame: international thick wall high carbon steel combined with national standard profile |
|
|
