|
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.38-6UL_ga-00060-g7121c94 (liyue@developer-RH2485-V2) (gcc version 4.6.2 20110630 (prerelease) (Freescale MAD -- Linaro 2011.07 -- Built at 2011/08/10 09:20) ) #1 SMP PREEMPT Tue Nov 13 13:37:13 CST 2018
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Freescale i.MX6 UltraLite 14x14 EVK Board
[ 0.000000] cma: CMA: reserved 64 MiB at 8c000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 61440
[ 0.000000] free_area_init_node: node 0, pgdat 80b63380, node_mem_map 8bdd7000
[ 0.000000] DMA zone: 512 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 61440 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @8bdbf000 s8832 r8192 d15744 u32768
[ 0.000000] pcpu-alloc: s8832 r8192 d15744 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60928
[ 0.000000] Kernel command line: console=ttymxc0,115200 cma=64M root=/dev/nfs rw ip=192.168.1.111:192.168.1.113::255.255.255.0::eth0:off nfsroot=192.168.1.113:/home/work/custom_root_for_qt5,v3,tcp calibrate=y
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 165600K/245760K available (7947K kernel code, 482K rwdata, 2800K rodata, 396K init, 433K bss, 80160K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0x90800000 - 0xff000000 (1768 MB)
[ 0.000000] lowmem : 0x80000000 - 0x90000000 ( 256 MB)
[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
[ 0.000000] .text : 0x80008000 - 0x80a86f7c (10748 kB)
[ 0.000000] .init : 0x80a87000 - 0x80aea280 ( 397 kB)
[ 0.000000] .data : 0x80aec000 - 0x80b648a0 ( 483 kB)
[ 0.000000] .bss : 0x80b648ac - 0x80bd0e74 ( 434 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Switching to timer-based delay loop
[ 0.000020] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
[ 0.002557] clocksource_of_init: no matching clocksources found
[ 0.002925] Console: colour dummy device 80x30
[ 0.002975] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
[ 0.003009] pid_max: default: 32768 minimum: 301
[ 0.003399] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.003428] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.004962] Initializing cgroup subsys net_cls
[ 0.005053] CPU: Testing write buffer coherency: ok
[ 0.005561] /cpus/cpu@0 missing clock-frequency property
[ 0.005602] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.005664] Setting up static identity map for 0x8078bcd0 - 0x8078bd28
[ 0.040750] Brought up 1 CPUs
[ 0.040785] SMP: Total of 1 processors activated (6.00 BogoMIPS).
[ 0.040802] CPU: All CPU(s) started in SVC mode.
[ 0.042111] devtmpfs: initialized
[ 0.052736] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.053519] pinctrl core: initialized pinctrl subsystem
[ 0.054416] regulator-dummy: no parameters
[ 0.059740] NET: Registered protocol family 16
[ 0.076099] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.077693] cpuidle: using governor ladder
[ 0.077721] cpuidle: using governor menu
[ 0.078198] Use WDOG1 as reset source
[ 0.096334] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
[ 0.097060] vdd3p0: 2625 <--> 3400 mV at 3000 mV
[ 0.097955] cpu: 725 <--> 1450 mV at 1150 mV
[ 0.098805] vddsoc: 725 <--> 1450 mV at 1175 mV
[ 0.103992] syscon 20e4000.iomuxc-gpr: regmap [mem 0x020e4000-0x020e7fff] registered
[ 0.110546] syscon 21ac000.romcp: regmap [mem 0x021ac000-0x021affff] registered
[ 0.112069] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
[ 0.118974] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.119005] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.122997] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.125908] 20dc000.gpc supply pu not found, using dummy regulator
[ 0.161360] bio: create slab <bio-0> at 0
[ 0.168058] mxs-dma 1804000.dma-apbh: initialized
[ 0.169000] can-3v3: 3300 mV
[ 0.169566] VSD_3V3: 3300 mV
[ 0.170361] usb_otg1_vbus: 5000 mV
[ 0.170908] vref-3v3: 3300 mV
[ 0.172368] gpio_dvfs: 1300 <--> 1400 mV at 1400 mV
[ 0.173669] i2c-core: driver [max17135] using legacy suspend method
[ 0.173694] i2c-core: driver [max17135] using legacy resume method
[ 0.174925] SCSI subsystem initialized
[ 0.175405] libata version 3.00 loaded.
[ 0.176166] usbcore: registered new interface driver usbfs
[ 0.176343] usbcore: registered new interface driver hub
[ 0.176671] usbcore: registered new device driver usb
[ 0.181452] i2c i2c-0: IMX I2C adapter registered
[ 0.184065] i2c i2c-1: IMX I2C adapter registered
[ 0.184351] Linux video capture interface: v2.00
[ 0.184552] pps_core: LinuxPPS API ver. 1 registered
[ 0.184575] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.184657] PTP clock support registered
[ 0.187239] MIPI CSI2 driver module loaded
[ 0.187807] Advanced Linux Sound Architecture Driver Initialized.
[ 0.189762] Bluetooth: Core ver 2.18
[ 0.189901] NET: Registered protocol family 31
[ 0.189923] Bluetooth: HCI device and connection manager initialized
[ 0.189964] Bluetooth: HCI socket layer initialized
[ 0.189994] Bluetooth: L2CAP socket layer initialized
[ 0.190100] Bluetooth: SCO socket layer initialized
[ 0.191103] cfg80211: Calling CRDA to update world regulatory domain
[ 0.192330] Switched to clocksource mxc_timer1
[ 0.217632] NET: Registered protocol family 2
[ 0.219633] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.219722] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.219812] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.219932] TCP: reno registered
[ 0.219972] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.220030] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.220584] NET: Registered protocol family 1
[ 0.221338] RPC: Registered named UNIX socket transport module.
[ 0.221370] RPC: Registered udp transport module.
[ 0.221388] RPC: Registered tcp transport module.
[ 0.221406] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.224412] imx rpmsg driver is registered.
[ 0.226002] Bus freq driver module loaded
[ 0.227950] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.247578] VFS: Disk quotas dquot_6.5.2
[ 0.248290] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.254328] NFS: Registering the id_resolver key type
[ 0.254522] Key type id_resolver registered
[ 0.254544] Key type id_legacy registered
[ 0.254631] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.256544] fuse init (API version 7.22)
[ 0.257727] yaffs: yaffs Installing.
[ 0.257818] msgmni has been set to 451
[ 0.265970] io scheduler noop registered
[ 0.266002] io scheduler deadline registered
[ 0.266484] io scheduler cfq registered (default)
[ 0.267527] imx-weim 21b8000.weim: Driver registered.
[ 0.273372] backlight.9 supply power not found, using dummy regulator
[ 0.276530] MIPI DSI driver module loaded
[ 0.280710] 21c8000.lcdif supply lcd not found, using dummy regulator
[ 0.281217] mxsfb 21c8000.lcdif: failed to find mxc display driver
[ 0.282001] mxsfb 21c8000.lcdif: initialized
[ 0.289395] imx-sdma 20ec000.sdma: no event needs to be remapped
[ 0.289604] imx-sdma 20ec000.sdma: loaded firmware 3.1
[ 0.298201] imx-sdma 20ec000.sdma: initialized
[ 0.299616] Serial: IMX driver
[ 0.300261] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX
[ 1.051772] console [ttymxc0] enabled
[ 1.057216] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX
[ 1.067104] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 5000000) is a IMX
[ 1.076738] serial: Freescale lpuart driver
[ 1.083004] imx sema4 driver is registered.
[ 1.087366] [drm] Initialized drm 1.1.0 20060810
[ 1.093121] [drm] Initialized vivante 1.0.0 20120216 on minor 0
[ 1.120498] brd: module loaded
[ 1.135495] loop: module loaded
[ 1.142749] spi_gpio spi4.15: gpio-miso property not found, switching to no-rx mode
[ 1.154761] CAN device driver interface
[ 1.161911] flexcan 2090000.can: device registered (reg_base=90960000, irq=142)
[ 1.171972] flexcan 2094000.can: device registered (reg_base=90968000, irq=143)
[ 1.181516] 20b4000.ethernet supply phy not found, using dummy regulator
[ 1.189613] pps pps0: new PPS source ptp0
[ 1.194822] libphy: fec_enet_mii_bus: probed
[ 1.203027] fec 20b4000.ethernet eth0: registered PHC device 0
[ 1.210549] 2188000.ethernet supply phy not found, using dummy regulator
[ 1.218631] pps pps1: new PPS source ptp1
[ 1.225084] fec 2188000.ethernet eth1: registered PHC device 1
[ 1.232786] PPP generic driver version 2.4.2
[ 1.237602] PPP BSD Compression module registered
[ 1.242475] PPP Deflate Compression module registered
[ 1.247755] usbcore: registered new interface driver asix
[ 1.253419] usbcore: registered new interface driver cdc_ether
[ 1.259416] usbcore: registered new interface driver cdc_eem
[ 1.265436] usbcore: registered new interface driver cdc_ncm
[ 1.271201] GobiNet: Quectel_WCDMA<E_Linux&Android_GobiNet_Driver_V1.3.0
[ 1.278355] usbcore: registered new interface driver GobiNet
[ 1.284091] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.290650] ehci-mxc: Freescale On-Chip EHCI Host driver
[ 1.296475] usbcore: registered new interface driver usb-storage
[ 1.302918] usbcore: registered new interface driver usbserial
[ 1.308895] usbcore: registered new interface driver usbserial_generic
[ 1.315630] usbserial: USB Serial support registered for generic
[ 1.321780] usbcore: registered new interface driver ftdi_sio
[ 1.327709] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.335216] usbcore: registered new interface driver option
[ 1.340935] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.348083] usbcore: registered new interface driver pl2303
[ 1.353835] usbserial: USB Serial support registered for pl2303
[ 1.359958] usbcore: registered new interface driver cdc_xr_usb_serial
[ 1.366561] xr_usb_serial_common: Exar USB UART (serial port) driver
[ 1.373117] usbcore: registered new interface driver usb_ehset_test
[ 1.381663] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
[ 1.397802] 2184200.usb supply vbus not found, using dummy regulator
[ 1.408088] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 1.413150] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[ 1.432400] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 1.439863] hub 1-0:1.0: USB hub found
[ 1.443852] hub 1-0:1.0: 1 port detected
[ 1.450033] mousedev: PS/2 mouse device common for all mice
[ 1.457748] input: 20cc000.snvs-pwrkey as /devices/soc0/soc.0/2000000.aips-bus/20cc000.snvs-pwrkey/input/input0
[ 1.468669] snvs_pwrkey 20cc000.snvs-pwrkey: i.MX snvs powerkey probed
[ 1.475615] <<-GTP-INFO->> GTP driver installing...
[ 1.481051] <<-GTP-INFO->> GTP Driver Version: V2.4<2014/11/28>
[ 1.487148] <<-GTP-INFO->> GTP Driver Built@13:36:34, Nov 13 2018
[ 1.493315] <<-GTP-INFO->> GTP I2C Address: 0x5d
[ 1.498007] 0-005d supply vdd_ana not found, using dummy regulator
[ 1.504408] 0-005d supply vcc_i2c not found, using dummy regulator
[ 1.510719] <<-GTP-INFO->> Guitar reset
[ 1.644553] <<-GTP-INFO->> IC Version: 911_1060
[ 1.679274] <<-GTP-INFO->> X_MAX: 800, Y_MAX: 480, TRIGGER: 0x01
[ 1.702459] <<-GTP-INFO->> create proc entry gt9xx_config success
[ 1.709192] input: goodix-ts as /devices/virtual/input/input1
[ 1.715664] <<-GTP-INFO->> GTP works in interrupt mode.
[ 1.721719] edt_ft5x06 0-0038: touchscreen probe failed
[ 1.727256] edt_ft5x06: probe of 0-0038 failed with error -5
[ 1.736209] input: iMX6UL TouchScreen Controller as /devices/virtual/input/input3
[ 1.748423] i2c-core: driver [isl29023] using legacy suspend method
[ 1.754965] i2c-core: driver [isl29023] using legacy resume method
[ 1.762505] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 1.775365] rtc-rx8010 0-0032: Update timer was detected
[ 1.783688] rtc-rx8010 0-0032: rtc core: registered rx8010 as rtc0
[ 1.791263] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc1
[ 1.799978] i2c /dev entries driver
[ 1.804831] IR NEC protocol handler initialized
[ 1.809405] IR RC5(x) protocol handler initialized
[ 1.814297] IR RC6 protocol handler initialized
[ 1.818860] IR JVC protocol handler initialized
[ 1.823921] IR Sony protocol handler initialized
[ 1.828575] IR RC5 (streamzap) protocol handler initialized
[ 1.834216] IR SANYO protocol handler initialized
[ 1.838948] IR MCE Keyboard/mouse protocol handler initialized
[ 1.847641] pxp-v4l2 pxp_v4l2.10: initialized
[ 1.852511] usbcore: registered new interface driver uvcvideo
[ 1.858293] USB Video Class driver (1.1.1)
[ 1.863525] i2c-core: driver [mag3110] using legacy suspend method
[ 1.869747] i2c-core: driver [mag3110] using legacy resume method
[ 1.877014] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
[ 1.885977] Bluetooth: HCI UART driver ver 2.2
[ 1.890468] Bluetooth: HCI H4 protocol initialized
[ 1.895415] Bluetooth: HCI BCSP protocol initialized
[ 1.900409] Bluetooth: HCIATH3K protocol initialized
[ 1.905670] usbcore: registered new interface driver bcm203x
[ 1.911547] usbcore: registered new interface driver btusb
[ 1.917677] usbcore: registered new interface driver ath3k
[ 1.925039] hub 1-1:1.0: USB hub found
[ 1.929186] usbcore: registered new interface driver rtk_btusb
[ 1.935171] hub 1-1:1.0: 4 ports detected
[ 1.939944] sdhci: Secure Digital Host Controller Interface driver
[ 1.946587] sdhci: Copyright(c) Pierre Ossman
[ 1.951095] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.962529] mmc0: no vqmmc regulator found
[ 2.012366] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
[ 2.035874] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 2.042386] nand: Micron MT29F2G08ABAEAWP
[ 2.046437] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 2.053351] gpmi-nand 1806000.gpmi-nand: enable the asynchronous EDO mode 5
[ 2.060400] Scanning device for bad blocks
[ 2.232659] usb 1-1.4: new high-speed USB device number 3 using ci_hdrc
[ 2.269745] 6 ofpart partitions found on MTD device gpmi-nand
[ 2.275581] Creating 6 MTD partitions on "gpmi-nand":
[ 2.280693] 0x000000000000-0x000000400000 : "boot"
[ 2.288350] 0x000000400000-0x000000600000 : "logo"
[ 2.295791] 0x000000600000-0x000000700000 : "ENV"
[ 2.303108] 0x000000700000-0x000000a00000 : "DTB"
[ 2.310409] 0x000000a00000-0x000001200000 : "kernel"
[ 2.318169] 0x000001200000-0x000010000000 : "rootfs"
[ 2.326583] gpmi-nand 1806000.gpmi-nand: driver registered.
[ 2.336695] usbcore: registered new interface driver usbhid
[ 2.342419] usbhid: USB HID core driver
[ 2.361893] usb 1-1.4: Direct firmware load failed with error -2
[ 2.368467] usb 1-1.4: Falling back to user helper
[ 2.378457] fsl-asrc 2034000.asrc: driver registered
[ 2.392526] snd-soc-dummy snd-soc-dummy: ASoC: Failed to create platform debugfs directory
[ 2.401914] imx-wm8960 sound.14: wm8960-hifi <-> 202c000.sai mapping ok
[ 2.410262] imx-wm8960 sound.14: snd-soc-dummy-dai <-> 2034000.asrc mapping ok
[ 2.417806] imx-wm8960 sound.14: wm8960-hifi <-> 202c000.sai mapping ok
[ 2.435236] NET: Registered protocol family 26
[ 2.439742] Netfilter messages via NETLINK v0.30.
[ 2.444614] nfnl_acct: registering with nfnetlink.
[ 2.449570] nf_conntrack version 0.5.0 (3611 buckets, 14444 max)
[ 2.456974] ctnetlink v0.93: registering with nfnetlink.
[ 2.462710] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[ 2.469288] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
[ 2.477078] xt_time: kernel timezone is -0000
[ 2.482184] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.488045] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 2.494620] arp_tables: (C) 2002 David S. Miller
[ 2.499416] TCP: cubic registered
[ 2.504243] NET: Registered protocol family 10
[ 2.510923] sit: IPv6 over IPv4 tunneling driver
[ 2.517350] NET: Registered protocol family 17
[ 2.521884] can: controller area network core (rev 20120528 abi 9)
[ 2.528377] NET: Registered protocol family 29
[ 2.533046] can: raw protocol (rev 20120528)
[ 2.537352] can: broadcast manager protocol (rev 20120528 t)
[ 2.543167] can: netlink gateway (rev 20130117) max_hops=1
[ 2.549367] Bluetooth: RFCOMM TTY layer initialized
[ 2.554530] Bluetooth: RFCOMM socket layer initialized
[ 2.559753] Bluetooth: RFCOMM ver 1.11
[ 2.563618] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.568959] Bluetooth: BNEP filters: protocol multicast
[ 2.574272] Bluetooth: BNEP socket layer initialized
[ 2.579302] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.585305] Bluetooth: HIDP socket layer initialized
[ 2.590414] 8021q: 802.1Q VLAN Support v1.8
[ 2.594863] Key type dns_resolver registered
[ 2.616638] gpio_dvfs: disabling
[ 2.619922] vref-3v3: disabling
[ 2.623277] usb_otg1_vbus: disabling
[ 2.626890] VSD_3V3: disabling
[ 2.629971] can-3v3: disabling
[ 2.633604] regulator-dummy: disabling
[ 2.637866] imx mcc test is registered.
[ 2.643947] rtc-rx8010 0-0032: setting system clock to 2019-04-27 16:56:44 UTC (1556384204)
[ 2.753517] fec 20b4000.ethernet eth0: Freescale FEC PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=20b4000.ethernet:01, irq=-1)
[ 2.792675] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.753192] libphy: 20b4000.ethernet:01 - Link is Up - 100/Full
[ 6.772556] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.793253] IP-Config: Complete:
[ 6.796585] device=eth0, hwaddr=00:e0:0c:bc:e5:61, ipaddr=192.168.1.111, mask=255.255.255.0, gw=255.255.255.255
[ 6.807456] host=192.168.1.111, domain=, nis-domain=(none)
[ 6.814306] bootserver=192.168.1.113, rootserver=192.168.1.113, rootpath=
[ 6.821888] ALSA device list:
[ 6.824992] #0: wm8960-audio
[ 6.842213] VFS: Mounted root (nfs filesystem) on device 0:12.
[ 6.849121] devtmpfs: mounted
[ 6.853083] Freeing unused kernel memory: 396K (80a87000 - 80aea000)
[ 6.971695] random: nonblocking pool is initialized
[ 28.708699] <<-GTP-INFO->> System resume.
[ 28.723112] <<-GTP-INFO->> GTP wakeup sleep.
[ 47.906597] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 62.574914] usb 1-1.4: Direct firmware load failed with error -2
[ 62.580999] usb 1-1.4: Falling back to user helper
[ 62.667551] rtk_btusb: get_firmware failed!
[ 62.671786] rtk_btusb: btusb_open failed pm_usage_cnt(0x0)
|
