Step 2. Choose the operating system type: Windows Linux Step 3. Download the document images. Images within the Daykeeper are not embedded in the files, the images are stored separately on the hard drive. This only needs to be done once. Step 4. Unzip the image files. The images must be in a specific folder. If the images are not in the folders, put the images into these folders: Windows: C:\daykeeper Click and run the file downloaded in step 3 (Daykeeper_images.exe), it is a self extracting zip file. This will automatically create the images in the correct folder. The Daykeeper_images.exe file is a executable and may require allowing it to run if Windows asks. (Alternately the Linux zip archive may be used to manually create the zipped images on Windows) Linux: /usr/share/daykeeper Unzip the images (Ubuntu) Leave the image zip file 'DKbmaps_Linux.zip' in the Downloads folder. Open a command terminal: Applications-Accessories-Terminal. Copy/paste (or type) the following text into the terminal to unzip and save the images (use exact case): sudo unzip ~/Downloads/DKbmaps_Linux.zip -d /usr/share/daykeeper this will ask for the root user password. Step 5. Download the Daykeeper document file. Step 6. Open the Daykeeper document file. If not already open, navigate to the download folder, click the 'DayKeeper.rtf' file. The file should open using Word or Open Office. You should see the color images if properly set up. There must be 24 pages, 12 front plus 12 back. Delete spaces or adjust the margins if there are more than 24 pages. Rich Text format (.rtf) with color images. For use with many word processors. (Does NOT work with Wordpad). Works with Open Office(free at http://www./)Printing Instructions These instructions are for a desktop printer which prints on the back of the paper as to when fed into the printer. You may have to manually re-order each paper sheet order before printing the backs depending on your printer. Download the image archive and the Daykeeper rtf file above. Unzip the image archive and save the files in the locations specified for your operating system. The images need to be stored in the exact folders, the Daykeeper rtf file looks for the images there. The Daykeeper rtf file may be located anywhere. Test how to turn over the papers to print on the back.*Print page 1 then print page 13 on the back as a test. You may want to use black ink only during testing. Remember how the paper needs to be turned over. When you get that correct then print the entire planner. Print the entire day planner. ONLY USE 12 SHEETS OF PAPER. There are 12 pieces of paper used when printed on both sides. You may have to adjust the margins to work with your printer, but you need to end up with 24 pages in the Daykeeper rtf file. 'DayKeeper.rtf' pages 1-12 are the front of the papers, 'DayKeeper.rtf' pages 13-24 are the backs of the papers. Print the 12 front pages, turn the stack over, page one should be on top with the orientation so page 13 prints on the unprinted side, then put the stack in the printer again and on the backs of them, print the backs. After the first 12 pages are printed, you will have to turn the pages with the correct side up and with the correct side entering the printer first. You will have to adjust the sheets so that page 13 of DayKeeper goes on the back of page 1 of DayKeeper and so on. Make sure the orientation is the same, that is be careful that the tops are correct. Make sure the wavespell numbers are in order. The numbers are at the beginning of a wavespell:'Wizard wavespell (2)'. Also the kin numbers must start at 1 and go to 260. Fold the day planner and staple on the crease. Use a long reach stapler or open a small stapler up and manually bend the staples or make holes in the crease and stitch. If all else fails, print 1 sheet of paper at a time in this way; Print options choose to print one page: print page 1 then on the back page print 13, print page 2 then on the back page print 14, print page 3 then on the back page print 15 and so on until all 12 sheets are printed Check that you have the correct operating system selected. [X] hide |
|
|
