Unity中的PBR
1.PBR的相关文件
2.Unity中的BRDF （漫反射项与基于GGX的高光反射项）
3.能量守恒
4.简单的PBR_Shader
UnityPBR模型存在与他的帮助文件里。shader中没有类和命名空间的概念。通过#include的方式将不同的文件加载到当前shader中。
下面是Unity中PBR涉及到的cg文件及其包含结构
Unity实际上有多个实现。它会根据目标平台、硬件和API级别来决定使用哪个。这个算法可以通过UNITY_BRDF_PBS宏进行访问，这个宏在UnityPBSLighting中进行定义。而 BRDF代表的是双向反射分布函数。
//UNITY_BRDF_PBS定义 根据平台的不同选择 选择三个等级的BRDF 默认会选择BRDF1也是效果最好的
// Default BRDF to use:
#if !defined (UNITY_BRDF_PBS) // allow to explicitly override BRDF in custom shader
// still add safe net for low shader models, otherwise we might end up with shaders failing to compile
#if SHADER_TARGET < 30 || defined(SHADER_TARGET_SURFACE_ANALYSIS) // only need "something" for surface shader analysis pass; pick the cheap one
#define UNITY_BRDF_PBS BRDF3_Unity_PBS
#elif defined(UNITY_PBS_USE_BRDF3)
#define UNITY_BRDF_PBS BRDF3_Unity_PBS
#elif defined(UNITY_PBS_USE_BRDF2)
#define UNITY_BRDF_PBS BRDF2_Unity_PBS
#elif defined(UNITY_PBS_USE_BRDF1)
#define UNITY_BRDF_PBS BRDF1_Unity_PBS
#else
#error something broke in auto-choosing BRDF
#endif
#endif
BRDF函数在 UnityStandardBRDF.cginc 中定义
BRDF1：
漫反射项 ，BRDF 用了 DisneyDiffuse ：
// Note: Disney diffuse must be multiply by diffuseAlbedo / PI. This is done outside of this function.
half DisneyDiffuse(half NdotV, half NdotL, half LdotH, half perceptualRoughness)
{
half fd90 = 0.5 + 2 * LdotH * LdotH * perceptualRoughness;
// Two schlick fresnel term
half lightScatter = (1 + (fd90 - 1) * Pow5(1 - NdotL));
half viewScatter = (1 + (fd90 - 1) * Pow5(1 - NdotV));
return lightScatter * viewScatter;
}
根据Cook-Torrance 的微表面高光BRDF公式
把高光分成三项
D项 Normal Distribution Function (NDF) 法线分布函数
DGGX = a2 / π((a2 – 1) (n · h)2 + 1)2
a = roughness2
inline float GGXTerm (float NdotH, float roughness)
{
float a2 = roughness * roughness;
float d = (NdotH * a2 - NdotH) * NdotH + 1.0f; // 2 mad
return UNITY_INV_PI * a2 / (d * d + 1e-7f); // This function is not intended to be running on Mobile,
// therefore epsilon is smaller than what can be represented by half
}
G项 Geometric Shadowing 阴影遮挡函数
G(l, v) = G1(l) G1(v)
G1(x) = 1 / ((n · x) (1 - K) + K)
K = roughness2 / 2
上述公式对应的函数为SmithGGXVisibilityTerm，而实际使用的函数为SmithJointGGXVisibilityTerm
// Ref: http:///published/0003/02/03/paper.pdf
inline float SmithJointGGXVisibilityTerm (float NdotL, float NdotV, float roughness)
{
#if 0
// Original formulation:
// lambda_v = (-1 + sqrt(a2 * (1 - NdotL2) / NdotL2 + 1)) * 0.5f;
// lambda_l = (-1 + sqrt(a2 * (1 - NdotV2) / NdotV2 + 1)) * 0.5f;
// G = 1 / (1 + lambda_v + lambda_l);
// Reorder code to be more optimal
half a = roughness;
half a2 = a * a;
half lambdaV = NdotL * sqrt((-NdotV * a2 + NdotV) * NdotV + a2);
half lambdaL = NdotV * sqrt((-NdotL * a2 + NdotL) * NdotL + a2);
// Simplify visibility term: (2.0f * NdotL * NdotV) / ((4.0f * NdotL * NdotV) * (lambda_v + lambda_l + 1e-5f));
return 0.5f / (lambdaV + lambdaL + 1e-5f); // This function is not intended to be running on Mobile,
// therefore epsilon is smaller than can be represented by half
#else
// Approximation of the above formulation (simplify the sqrt, not mathematically correct but close enough)
float a = roughness;
float lambdaV = NdotL * (NdotV * (1 - a) + a);
float lambdaL = NdotV * (NdotL * (1 - a) + a);
#if defined(SHADER_API_SWITCH)
return 0.5f / (lambdaV + lambdaL + 1e-4f); // work-around against hlslcc rounding error
#else
return 0.5f / (lambdaV + lambdaL + 1e-5f);
#endif
#endif
}
F项 菲涅耳公式
RF(l, h) = F0 + (1 - F0) (1 - l · h)5
inline half3 FresnelTerm (half3 F0, half cosA)
{
half t = Pow5 (1 - cosA); // ala Schlick interpoliation
return F0 + (1-F0) * t;
}
BRDF1_Unity_PBS 源码
half4 BRDF1_Unity_PBS (half3 diffColor, half3 specColor, half oneMinusReflectivity, half smoothness,
float3 normal, float3 viewDir,
UnityLight light, UnityIndirect gi)
{
float perceptualRoughness = SmoothnessToPerceptualRoughness (smoothness);
float3 halfDir = Unity_SafeNormalize (float3(light.dir) + viewDir);
#define UNITY_HANDLE_CORRECTLY_NEGATIVE_NDOTV 0
#if UNITY_HANDLE_CORRECTLY_NEGATIVE_NDOTV
// The amount we shift the normal toward the view vector is defined by the dot product.
half shiftAmount = dot(normal, viewDir);
normal = shiftAmount < 0.0f ? normal + viewDir * (-shiftAmount + 1e-5f) : normal;
// A re-normalization should be applied here but as the shift is small we don't do it to save ALU.
//normal = normalize(normal);
float nv = saturate(dot(normal, viewDir)); // TODO: this saturate should no be necessary here
#else
half nv = abs(dot(normal, viewDir)); // This abs allow to limit artifact
#endif
float nl = saturate(dot(normal, light.dir));
float nh = saturate(dot(normal, halfDir));
half lv = saturate(dot(light.dir, viewDir));
half lh = saturate(dot(light.dir, halfDir));
// Diffuse term
half diffuseTerm = DisneyDiffuse(nv, nl, lh, perceptualRoughness) * nl;
// Specular term
// HACK: theoretically we should divide diffuseTerm by Pi and not multiply specularTerm!
// BUT 1) that will make shader look significantly darker than Legacy ones
// and 2) on engine side "Non-important" lights have to be divided by Pi too in cases when they are injected into ambient SH
float roughness = PerceptualRoughnessToRoughness(perceptualRoughness);
#if UNITY_BRDF_GGX
// GGX with roughtness to 0 would mean no specular at all, using max(roughness, 0.002) here to match HDrenderloop roughtness remapping.
roughness = max(roughness, 0.002);
float V = SmithJointGGXVisibilityTerm (nl, nv, roughness);
float D = GGXTerm (nh, roughness);
#else
// Legacy
half V = SmithBeckmannVisibilityTerm (nl, nv, roughness);
half D = NDFBlinnPhongNormalizedTerm (nh, PerceptualRoughnessToSpecPower(perceptualRoughness));
#endif
float specularTerm = V*D * UNITY_PI; // Torrance-Sparrow model, Fresnel is applied later
# ifdef UNITY_COLORSPACE_GAMMA
specularTerm = sqrt(max(1e-4h, specularTerm));
# endif
// specularTerm * nl can be NaN on Metal in some cases, use max() to make sure it's a sane value
specularTerm = max(0, specularTerm * nl);
#if defined(_SPECULARHIGHLIGHTS_OFF)
specularTerm = 0.0;
#endif
// surfaceReduction = Int D(NdotH) * NdotH * Id(NdotL>0) dH = 1/(roughness^2+1)
half surfaceReduction;
# ifdef UNITY_COLORSPACE_GAMMA
surfaceReduction = 1.0-0.28*roughness*perceptualRoughness; // 1-0.28*x^3 as approximation for (1/(x^4+1))^(1/2.2) on the domain [0;1]
# else
surfaceReduction = 1.0 / (roughness*roughness + 1.0); // fade \in [0.5;1]
# endif
// To provide true Lambert lighting, we need to be able to kill specular completely.
specularTerm *= any(specColor) ? 1.0 : 0.0;
half grazingTerm = saturate(smoothness + (1-oneMinusReflectivity));
half3 color = diffColor * (gi.diffuse + light.color * diffuseTerm)
+ specularTerm * light.color * FresnelTerm (specColor, lh)
+ surfaceReduction * gi.specular * FresnelLerp (specColor, grazingTerm, nv);
return half4(color, 1);
}
顺便提下金属流的能量守恒 用UnityStandardUtils.cginc 中的DiffuseAndSpecularFromMetallic
inline half OneMinusReflectivityFromMetallic(half metallic)
{
// We'll need oneMinusReflectivity, so
// 1-reflectivity = 1-lerp(dielectricSpec, 1, metallic) = lerp(1-dielectricSpec, 0, metallic)
// store (1-dielectricSpec) in unity_ColorSpaceDielectricSpec.a, then
// 1-reflectivity = lerp(alpha, 0, metallic) = alpha + metallic*(0 - alpha) =
// = alpha - metallic * alpha
half oneMinusDielectricSpec = unity_ColorSpaceDielectricSpec.a;
return oneMinusDielectricSpec - metallic * oneMinusDielectricSpec;
}
inline half3 DiffuseAndSpecularFromMetallic (half3 albedo, half metallic, out half3 specColor, out half oneMinusReflectivity)
{
specColor = lerp (unity_ColorSpaceDielectricSpec.rgb, albedo, metallic);
oneMinusReflectivity = OneMinusReflectivityFromMetallic(metallic);
return albedo * oneMinusReflectivity;
}
简单的PBS_Shader
// Upgrade NOTE: replaced '_Object2World' with 'unity_ObjectToWorld'
Shader "Unlit/03_UnityBRDF"
{
Properties
{
_Metallic("_Metallic",Range(0,1))=0
_DiffuseColor("DiffuseColor",Color)=(1,1,1,1)
_MainTex ("Texture", 2D) = "white" {}
_Smoothness("Smoothness",Range(0,1))=0
}
SubShader
{
Pass
{
Tags{"LightMode"="ForwardBase"}
CGPROGRAM
#pragma target 3.0
#pragma vertex vert
#pragma fragment frag
#include"UnityStandardUtils.cginc"
#include"AutoLight.cginc"
#include "UnityCG.cginc"
#include "UnityPBSLighting.cginc"
struct a2v
{
float4 vertex : POSITION;
float2 uv : TEXCOORD0;
float3 normal:NORMAL;
};
struct v2f
{
float4 pos : SV_POSITION;
float3 normal:TEXCOORD1;
float2 uv : TEXCOORD0;
float3 worldPos:TEXCOORD2;
};
sampler2D _MainTex;
float4 _MainTex_ST;
float _Metallic;
float _Smoothness;
fixed3 _DiffuseColor;
v2f vert (a2v v)
{
v2f o;
o.pos = UnityObjectToClipPos(v.vertex);
o.uv = TRANSFORM_TEX(v.uv, _MainTex);
o.worldPos=mul(unity_ObjectToWorld,v.vertex);
o.normal=UnityObjectToWorldNormal(v.normal);
return o;
}
fixed4 frag (v2f i) : SV_Target
{
//data
float3 worldViewDir=normalize(UnityWorldSpaceViewDir(i.worldPos)) ;
float3 worldLightDir=normalize(UnityWorldSpaceLightDir(i.worldPos)) ;
float3 worldNormal=normalize(i.normal);
fixed3 albedo=tex2D(_MainTex,i.uv).xyz*_DiffuseColor.xyz;
half3 specColor;
half oneMinusReflectivity;
albedo=DiffuseAndSpecularFromMetallic(albedo,_Metallic,specColor,oneMinusReflectivity);
UnityLight DirectLight;
DirectLight.dir=worldLightDir;
DirectLight.color=_LightColor0.xyz;
DirectLight.ndotl=DotClamped(worldNormal,worldLightDir);
UnityIndirect InDirectLight;
InDirectLight.diffuse=0;
InDirectLight.specular=0;
return UNITY_BRDF_PBS(albedo,specColor,oneMinusReflectivity,
_Smoothness,worldNormal,worldViewDir,
DirectLight,InDirectLight);
}
ENDCG
}
}
}
效果：
|
