【原】PVH098R01AD30A250000002001AB010A EH pump

        Vickers plunger pump is a variable displacement pump with straight shaft, which has 9 specifications and is controlled by pressure. Various control modes are available to provide you with maximum working flexibility, or flow compensator. The operation noise of Wegener plunger pump is very low, which can meet the current demanding industrial conditions. The noise level of each pump is close to or lower than that of the motor driving the pump. The noise is reduced by the patented timing configuration, and the measure also makes the pressure "pulsation" in the output flow very small. This makes the system using PVQ plunger pump noise can also be reduced.

  

             PVH098R01AD30A250000002001AB010A EH pump can use many kinds of hydraulic fluid to work. In addition to the typical oil-based hydraulic oil and synthetic hydraulic oil, it can also adapt to water hydraulic fluid and phospholipid acid hydraulic fluid.

            Vickers plunger pump has a through shaft drive scheme to adapt to the occasion of multi pump and installation needs. The through shaft driven pump can be equipped with different types and specifications of quantitative pump and variable displacement pump, forming a compact and flexible component. Such a component setting cost is relatively low, not only the size of the device is reduced, but only one mounting base on the prime mover is required.

             Vickers plunger pump has excellent working characteristics, and a wide range of control methods and installation forms make it possible to select the most appropriate model for any application. Moreover, the durability and long life characteristics of PVQ plunger pump can be compared with the best industrial products on the market. For 75 years, Eaton's name has become synonymous with long-term trouble free work.

        PVM series pump is an open circuit, axial plunger design. A number of controllers are provided to enable the pump to match each application.

        PVH large flow and high performance pump is a family of variable displacement straight shaft piston pump, which includes the proven design of other Wegener piston pumps. High quality manufacturing technology and working characteristics,  and small size, light weight.

  

       PVH098R01AD30A250000002001AB010A EH pump Advantages of PVH series:

-A multi-purpose design including a single pump, through shaft arrangement, and a variety of drive shafts and control options is available for any application and provides the most economical and safe installation.

-Reliable heavy-duty design package, compact case, provides 250 bar (3625 psi) continuous operation performance and 280 bar (4050 psi) operation performance in load sensing system. This design ensures that

Power intensive machines require longer life at higher performance levels.

-Compact and lightweight design reduces application weight while making installation and maintenance easier.

-A repair kit has been developed for the most critical rotating and control components to simplify and ensure successful pump repair.

-The mute design can be used in noise sensitive industrial applications, further reducing the noise level, thus providing a more acceptable working environment.

-Designed to maximize the efficiency of any type of application. Various compensators can provide the most effective system control,

An additional 95% volumetric efficiency means working at a higher flow rate and higher input energy, rather than

It's a loss of heat.

  

-The use of heavy-duty bearings and shafts minimizes internal deformation and wear, with longer life and longest running time.

The correct fluid state is essential for the long and satisfactory life of hydraulic components and systems. The hydraulic fluid must have the correct balance between cleanliness, materials and additives (in terms of protecting components from wear, increasing viscosity and clearing air).

Eaton's products of PVH098R01AD30A250000002001AB010A EH pump work satisfactorily in fluids with higher cleanliness codes than those listed, like any product, and other manufacturers often recommend grades higher than those specified. However,

          Experience has shown that in fluids with higher cleanliness codes than those listed below, the life of any hydraulic component is shortened. These codes have been proven to provide long and ineffective service lives for the listed products (no matter which manufacturer).

  

Hydraulic fluid and temperature range

Use anti-wear hydraulic oil or automobile crankcase oil marked SC, SD, se or SF in accordance with SAE j183feb80. Choose to achieve the best viscosity level between 40 CST (180 SUS) and 16 CST (80 SUS) in the best performance corridor shown.