90%成本集中度小于10的选股公式

1）{选股公式} {筹码集中} A1:=COST(85); A2:=COST(15); A3:=A1-A2; A4:=(A1+A2)/2; 单峰密集:A3/A4*100<15,linethick0; B1:=HHV(HIGH,250); B2:=LLV(LOW,250); B3:=B1-B2; 低位:A4<(B3*0.4+B2),linethick0; 低位单峰密集:单峰密集 AND 低位,colorred; 高位:A4>(B3*0.7+B2),linethick0; 高位单峰密集:单峰密集 AND 高位,colorgreen;{ 三位一体选股公式}STICKLINE(OPEN>=CLOSE,VOL,0,9,0),colorAAAAAA; STICKLINE(OPEN>=CLOSE,VOL,0,6,0),colorBBBBBB; STICKLINE(OPEN>=CLOSE,VOL,0,2.4,0),colorCCCCCC; STICKLINE(OPEN>=CLOSE,VOL,0,1.1,0),colorDDDDDD; STICKLINE(CLOSE>OPEN,VOL,0,9,0),color6666CC; STICKLINE(CLOSE>OPEN,VOL,0,6,0),color7777DD; STICKLINE(CLOSE>OPEN,VOL,0,2.4,0),color8888EE; STICKLINE(CLOSE>OPEN,VOL,0,1.1,0),color9999FF; STICKLINE(CLOSE>OPEN,OPEN,LOW,0.5,0),color1199FF; STICKLINE(CLOSE>OPEN,CLOSE,HIGH,0.5,0),color1199FF; STICKLINE(OPEN>=CLOSE,CLOSE,LOW,0.5,0),colorCCCCCC; STICKLINE(OPEN>=CLOSE,OPEN,HIGH,0.5,0),colorCCCCCC; VAR1:=DYNAINFO(17)*REF(MA(VOL,5),1); AR2:STICKLINE(DYNAINFO(7)=CLOSE AND DYNAINFO(10)=AMOUNT,VAR1,0,4,1); VARC:=(SMA(ABS(LOW-REF(LOW,1)),3,1))/(SMA(MAX(LOW-REF(LOW,1),0),3,1)); RSV1:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100; K1:=SMA(RSV1,3,1); D1:=SMA(K1,3,1); J1:=3*K1-2*D1; RSV:=(CLOSE-LLV(LOW,26))/(HHV(HIGH,26)-LLV(LOW,26))*100; K:=SMA(RSV,6,1); D:=SMA(K,3,1); J:=3*K-2*D;LC:=REF(CLOSE,1); XA:=(IF(CROSS(J1,J) AND J<20,-1,0))+(IF(CROSS(J,J1) AND J>80,1,0)); TYP:=(HIGH+LOW+CLOSE)/3; CCJ:=(TYP-MA(TYP,14))/(0.015*AVEDEV(TYP,14))/2; RSI1:=(SMA(MAX(CLOSE-LC,0),6,1))/(SMA(ABS(CLOSE-LC),6,1))*100;VAR222:=LLV(LOW,36); AR333:=HHV(HIGH,36); K2:=EMA((CLOSE-VAR222)/(VAR333-VAR222)*100,9); XB:=(IF(CCJ>100 AND K2>50 AND CLOSE>OPEN,0.5,0))+(IF(RSI1>80 AND K2>50 AND CLOSE>OPEN,0.5,0));RSV3:=(CLOSE-LLV(LOW,100))/(HHV(HIGH,100)-LLV(LOW,100))*100; K13:=SMA(RSV3,21,1); D13:=SMA(K1,3,1); J13:=3*K13-2*D13; XC:=IF(J13>80 AND RSI1>85,0.5,0); 金指 EMA(IF(LOW<=LLV(LOW,30),VARC,0),3))*150,LINETHICK2,colorFF0000; IF(DYNAINFO(7)=CLOSE AND DYNAINFO(10)=AMOUNT,VAR1,VAR2),colorFF0000; 警戒线:(IF(XA+XB+XC>0,61.8,0))*150;DRAWTEXT(DYNAINFO(7)=CLOSE AND DYNAINFO(10)=AMOUNT,VOL,'动态行情VOL'); 2.飞狐的单峰密集 sx100:=SUMBARS(100*v/CAPITAL,100); p100:=ma(c,sx100),LINETHICK1,color0000ff; ba100:=BACKSET(BARSTATUS=2,sx100); VERTLINE(ref(ba100,1)=0 and ba100=1),POINTDOT,color0000ff; sx200:=SUMBARS(100*v/CAPITAL,200); p200:=ma(c,sx200),LINETHICK1,colorff00ff; ba200:=BACKSET(BARSTATUS=2,sx200); VERTLINE(ref(ba200,1)=0 and ba200=1),POINTDOT,colorff00ff; sx300:=SUMBARS(100*v/CAPITAL,300); p300:=ma(c,sx300),LINETHICK1,colorff6600; ba300:=BACKSET(BARSTATUS=2,sx300); VERTLINE(ref(ba300,1)=0 and ba300=1),POINTDOT,colorff6600; sx400:=SUMBARS(100*v/CAPITAL,400); p400:=ma(c,sx400),LINETHICK1,color0099ff; ba400:=BACKSET(BARSTATUS=2,sx400); VERTLINE(ref(ba400,1)=0 and ba400=1),POINTDOT,color0099ff; sx500:=SUMBARS(100*v/CAPITAL,500); p500:=ma(c,sx500),LINETHICK1,colorgray; ba500:=BACKSET(BARSTATUS=2,sx500); VERTLINE(ref(ba500,1)=0 and ba500=1),POINTDOT,colorgray; a1:=p100;b[1]:=a1[SYSPARAM(1)]; a2:=p200;b[2]:=a2[SYSPARAM(1)]; a3:=p300;b[3]:=a3[SYSPARAM(1)]; a4:=p400;b[4]:=a4[SYSPARAM(1)]; a5:=p500;b[5]:=a5[SYSPARAM(1)]; zd:max(max(max(max(a1,a2),a3),a4),a5); zx:min(min(min(min(a1,a2),a3),a4),a5); PARTLINE(1,zd),COLORGRAY; PARTLINE(1,zx)COLORGRAY; for i=1 to 5 do begin if zd[SYSPARAM(1)]=b then 最大:if(i=1,100,I*100),LINETHICK0,COLORYELLOW; if zx[SYSPARAM(1)]=b then 最小:if(i=1,100,I*100),LINETHICK0,COLORGREEN; end; 3.一个单峰密集度选股 1）A50:=COST(50),COLORRED,LINETHICK2; WINNER(C)*100>50 AND CROSS(C,A50); 2）xa:=sma(cost(80),2,1); xb:=sma(cost(4),3,1); 筹码密集:(xa-xb)/xa*100<25 and COUNT(CLOSE,0)>30; 10. A1:=COST(85); A2:=COST(15); A3:=A1-A2; A4:=(A1+A2)/2; 单峰密集:A3/A4*100<14.45;

参数： n





公式如下：



LCS:=COST((100-n)/2);

LCE:=COST(n+(100-n)/2);



SCROK:((LCE-LCS)/(LCE+LCS)*100/2)<10;





{ 直接粘贴到新建的选股公式中就可以了。其中，参数 n 就是筹码分布成本的百分比, 例 n＝90 时，就是筹码分布 90%成本集中度小于10的选股公式； n＝80时，就是筹码分布 80%成本集中度小于10的选股公式 。}

筹码低位密集





input:M(480,250,999),集中度(12,12,30);

hh:=hhv(h,m);

ll:=llv(l,m);

zh:=hh[DATACOUNT];

zl:=ll[DATACOUNT];

q:=(zh-zl)/5;

c90％:=(cost(95)-cost(5))/(cost(95)+cost(5))*100;

c90％<=集中度 and c

求通达信低位筹码单峰密集选股公式：要求密集强度大，单峰幅度越窄越集中越好，如图：

你的理解和要求有些瑕疵，照你的原意编写过后，我觉得该选股公式有较大的缺陷，如果凭它选股，势必效率效果都不咋地。综其以上缘由，所以我进行了一些改动，大意也稍有改动，但实用性更好，名称自己按个。

参数：P1{0，100，90}
公式如下：
A:=P1+(100-P1)/2;
B:=(100-P1)/2;
CC:=COST(A);
DD:=COST(B);
↑1:IF((CC-DD)/(CC+DD)*100/2>REF((CC-DD)/(CC+DD)*100/2,BARSCOUNT(C)-1)+10,1,0);

如果你想在选股栏里看到SCR值，可以换用如下公式：
A:=P1+(100-P1)/2;
B:=(100-P1)/2;
CC:=COST(A);
DD:=COST(B);
SCR1:(CC-DD)/(CC+DD)*100/2;
SCR2:REF(SCR,BARSCOUNT(C)-1)+10;
↑1:IF(SCR1>SCR2,1,0);

选股后的↑1股票的投机价值将更大，相反则更小！
希望能对你有所帮助！ 

 大智慧筹码低位单峰选股指标公式

A1:=COST(85);
A2:=COST(15);
A3:=A1-A2;
A4:=(A1+A2)/2;
A5:=A3/A4*100<10;
B1:=HHV(h,250);
B2:=LLV(l,250);
B3:=B1-B2;
B4:=(A4-B2)
A5 AND B4;